|
| 1 | Dismantling for brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed. |
| 2 | Taking down cement plastering on on brick or concrete surface of any description. |
| 3 | M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM 1:4 all as specified |
| 4 | Dismantling of structural steel work including door, gate but excluding framed truss etc. |
| 5 | S&F MS framed workes in door gate of angle or other section gusset plate rail brackets etc complete drilled for fixing steel sheeting or other convering section of Fe 410-0 or 310-o |
| 6 | S&F MS pintel hinges large hasp and staple holdfast etc. |
| 7 | M&L rendering 15 mm thick in cm (1:4) on fair faces of brick or concrete surfaces work finished even and smooth without using extra cement. |
| 8 | S&F in repair galvanised two strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any standardral straining bolt including securing or tying at rossing with an provision of galvanised stell pin etc complete all as specified and directed. |
| 9 | Dismantling fencing wire mesh any type including line wire complete all as apecified and directed. |
| 10 | Supply only MS galvanised chain link fencing any size and type complete as all specified and directed. |
| 11 | Fixing only chain link fencing ,including welding or nuts & bolts of any size of mesh complete all as apecified and directed. |
| 12 | S&F MS screw bolt (machine made) with square heads at one end and screwed the other 10 mm dia exc 5 cm but n.exc 10 cm long complete all as specified and directed. |
| 13 | M&L 10 mm dia and over TMT deformed bars cut to length bent to shape required including cranking bending and hooking end and binding with MS wire annealed not less than 0.9 mm dia |
| 14 | Supply and Fix Punched Tape Concertina coil (including spike and handle ) with 56 loops and dia 600mm, Max covered length 8 RM , having a core wire of high carbon spring steel of high tensile strength. The punched tape and copre wire ( 2.5 ± 0.35mm dia) shall be heavy galvanzied (IS- 1730) (wire- 275GSM & strip 200 GSM) to provided protection against out door exposure. The punched tape shall mechanically crimped over the core wire and tehn formed into a coil at various parts of periphery of the coil. The width of strip as 19mm and spacing of blades 24.00 + 0.5 mm C/C. The weight of each coil shall be 8 ± 5% kgs without packing material and coil length 8 mtr ( Maximum) when opened up each coil would with bituminzed hessian cloth for providing protective packing complete all as specified & directed. |
| 15 | M&L preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm width or girth complete all as specified and directed. |
| 16 | M&L preparation of old steel surfaces over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 17 | M&L PCC 1:2:4 (type B1) using 20 mm graded stone aggregate as in rounded and chamber ,bends, cill,plinth course etc complete all as specified and directed. |
| 18 | Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above GL. |
| 19 | M&L for Hardcore of gauge n exc. 63mm, (broken stone/boulders)deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 20 | M&L for pcc 100 mm thick type D2 1:4:8 (40mm graded agregade) as in sub base complete all as specified. |
| 21 | M & L Sand filling under floors or in foundations including watering and consolidation and all as specified and directed.. |
| 22 | M&L PCC 1:2:4 type B0 (using 12.5mm graded aggregate) as in coping including necessary formwork complete. |
| 23 | M&L PCC (1:2:4) type B2 (40mm graded stone aggregate) cement concrete as in surface channels and drain for benching. |
| 24 | M&L Precast cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as in drain cover slab. |
| 25 | M&L for chequered cement concrete tiles 30x30x25mm thick with grey cement & pigment with 15 mm thick screed bed set in CM 1:6 all as specified and directed. |
| 26 | M&L for machine pressed precast coloured conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade over with gray cement and pigment. |
| 27 | Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof etc omplete all as specified and directed. |
| 28 | M & L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 29 | S&F mild steel of grade FE-290 (Grade E-165) in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters rinning bars, for doors, balusters, nosing to steps including embedding in concrete and screwingf etc. Wind ties for roof including securring bolts, angle iron post with swan neck (horn) and strut in fencing including cuting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securring wire mesh etc) including all as specified and directed. |
| 30 | M & L for Preparing old surfaces of wall and applying two coats of acrylic base exterior grade (100% Acrylic) complete all as specified and as directed. |
| 31 | M & L for Preparing newly plastered surfaces of wall and applying two coats of acrylic base exterior grade (100% Acrylic) over a coat of primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
