|
| 1 | Material and Labour for preparation of old polished wooden surfaces by grinding or scrapping and filling Caritics if any, with filler/putty to achieve even and smooth surface , sand papered and applying coat(s) of french polish ready made of brand approved to the following furniture to acheieve uniform glossy finish to the entire satisfaction of Engineer-in-charge complete all as specified and directed . |
| 2 | (A)Ditto but polishing Peg Table -ditto-. |
| 3 | (B) Ditto but polishing Sofa set 4 seater -ditto-. |
| 4 | (C ) Ditto but polishing Sofa set 5 seater -ditto-. |
| 5 | (D) Ditto but polishing Table Writing -ditto-. |
| 6 | (E) Ditto but polishing Table Centre. |
| 7 | (F) Ditto but polishing Table Bed side . |
| 8 | (G) Ditto but polishing Table dinning 6/8 person. |
| 9 | (H) Ditto but polishing Table 3'x2' with drawer/without drawer -ditto-. |
| 10 | (J) Ditto but polishing Teapoy -ditto-. |
| 11 | (K) Ditto but polishing Side Board -ditto-. |
| 12 | (L) Ditto but polishing Table dressing ladies -ditto-. |
| 13 | (M) Ditto but polishing Table dressing gents -ditto-. |
| 14 | (N) Ditto but polishing Chair dinning with long back -ditto-. |
| 15 | (O) Ditto but polishing Chair Dining -ditto-. |
| 16 | (P) Ditto but polishing Chair Easy -ditto-. |
| 17 | (Q ) Ditto but polishing Chair Writing -ditto-. |
| 18 | (R) Ditto but polishing Hat stand with mirror -ditto-. |
| 19 | (S) Ditto but polishing Chair wooden bottom -ditto-. |
| 20 | (T) Ditto but polishing Stool Dressing CB -ditto-. |
| 21 | Material and Labour for replacement of old existing unserviceable wooden members of CHAIR DINING and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 22 | (A) Front leg |
| 23 | (B) Rear leg |
| 24 | (C) Side rail with hole |
| 25 | (D) Front/back rail with hole |
| 26 | (E) Stiffener bottom |
| 27 | (F) Back rest made slightly curved in shape |
| 28 | Material and Labour for replacement of old existing unserviceable wooden members of Chair Writing and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 29 | (A) Front leg |
| 30 | (B) Rear leg |
| 31 | (C) Side rail with hole |
| 32 | (D) Front/back rail with hole |
| 33 | (E) Stiffener bottom |
| 34 | (F) Back rest |
| 35 | (G) Arms |
| 36 | Material and Labour for replacement of old existing unserviceable wooden members of Chair easy and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 37 | (A) Front leg |
| 38 | (B) Rear leg |
| 39 | (C) Front/Back frame with hole |
| 40 | (D) Hand rest |
| 41 | Material and Labour for replacement of old existing unserviceable wooden members of Chair Dining Officer and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 42 | (A) Front leg |
| 43 | (B) Rear leg |
| 44 | (C) Side rail |
| 45 | (D) Front/back rail |
| 46 | (E) Stiffener bottom |
| 47 | (F) Back rest (TW Ver Strips) |
| 48 | Material and Labour for replacement of old existing unserviceable wooden members of Sofa set 4/5 seater and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 49 | (A) Three Seater Front leg |
| 50 | (B)Three Seater Rear leg |
| 51 | (C )Three Seater Side rail |
| 52 | (D)Three SeaterFront /Back Rail |
| 53 | (E )Three Seater Front/Back Wooden Battens |
| 54 | (F) Three Seater Front/Back wooden Bearers |
| 55 | (G) Three Seater Hand rest |
| 56 | (H) Three Seater 12 mm ply for Back/Bottom |
| 57 | (J) Single Seater Front leg |
| 58 | (K)Single Seater Rear leg |
| 59 | (L)Single Seater Side rail |
| 60 | (M) Single SeaterFront /Back Rail |
| 61 | (N) Single Seater Front/Back Wooden Battens |
| 62 | (O) Single Seater Front/Back wooden Bearers |
| 63 | (P) Single Seater Hand rest |
| 64 | (Q) Single seater 12 mm ply for Back/Bottom |
| 65 | Material and Labour for replacement of old existing unserviceable wooden members of Chair wooden bottom and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 66 | (A) Front leg |
| 67 | (B) Rear leg |
| 68 | (C) Side rail |
| 69 | (D) Front/back rail |
| 70 | (E) Stiffener bottom |
| 71 | (F) Back rest |
| 72 | Removing old unserviceable plywood seat from Chair wooden bottom and Supply and fixing of new plywood seat of 6mm thick BWR quality ISI marked. complete all as specified in drawing and as directed by Engr-in charge. |
| 73 | Material and Labour for replacement of old existing unserviceable wooden members of Table Centre/2 tier and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 74 | (A) Legs |
| 75 | (B) Long rail |
| 76 | (C) short rail |
| 77 | (D) Stiffeners |
| 78 | Material and Labour for replacement of old existing unserviceable wooden members of Peg Table and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 79 | (A) Legs |
| 80 | (B) Long rail |
| 81 | (C) short rail |
| 82 | (D) Stiffeners |
| 83 | Material and Labour for replacement of old existing unserviceable wooden members of Teapoy wooden and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 84 | (A) Legs |
| 85 | (B) Long rail |
| 86 | (C) short rail |
| 87 | (D) Stiffener |
| 88 | Material and Labour for replacement of old existing unserviceable wooden members of Table 3X2 without drawer and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 89 | (A) Legs |
| 90 | (B) Long rail |
| 91 | (C) short rail |
| 92 | (D) Stiffener |
| 93 | Material and Labour for replacement of old existing unserviceable wooden members of Table 3X2 with drawer and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 94 | (A) Legs |
| 95 | (B) Long rail |
| 96 | (C) Drawer with knob |
| 97 | (D) short rail |
| 98 | (E) Stiffener |
| 99 | Material and Labour for replacement of old existing unserviceable wooden members of Table dining 6/8 person and supply and replacement of broken parts of wooden furniture by 1st class Hard wood members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. |
| 100 | (A) Legs |
| 101 | (B) Long rail |
| 102 | (C) short rail |
| 103 | (E) Stiffener |
| 104 | Removing old unserviceable & broken parts of Side Board and Supply & fixing of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beading Complete all as specified & shown on drawing and as directed by Engr-in-charge. |
| 105 | (A) Top/Bottan |
| 106 | (B) Left/Right sides |
| 107 | (C) Drawers with knob |
| 108 | (D) Shelf |
| 109 | (E) Shutter door including piano hinge & Knob |
| 110 | (F) Teak Wood frame for botton |
| 111 | (E) Knods |
| 112 | Supply and fixing of broken parts of Table writing by 18/19 mm thick commercial block board with 1 mm thick lamination sheet on one face duly finish fabricated as per existing shape and size, fixed with suitable size bamboo pins and fevicol including tightening of other joints if any complete all as per specified and shown in drawing and as directed by Engr-in-Charge:- |
| 113 | (A) Legs. |
| 114 | (B) Long rail. |
| 115 | (C) Short rail. |
| 116 | (D)18/19 mm thick commercial block board with 1 mm thick lamination sheet on one face for Right and left side of the box |
| 117 | (E) Drawer with knob. |
| 118 | (F) Back Side. |
| 119 | (G) Shutter / Door with one CB knob, two hinges and Shelf. |
| 120 | (H) Long stiffener. |
| 121 | (J) Short stiffener. |
| 122 | (K) 6 mm ply |
| 123 | Removing old unserviceable & broken parts of Table bed side and Supply of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beading and all around 16 Gauge 20mm square conduit pipe . Complete all as specified & shown on drawing and as directed by Engr-in-charge. |
| 124 | (A) Top |
| 125 | (B) Bottom |
| 126 | (C) Shelf/Drawers |
| 127 | (D) Left/Right sides |
| 128 | (E) Conduit frame incl back side,front side |
| 129 | Removing old unserviceable & broken parts of Table bed side and Supply of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beading Complete all as specified & shown on drawing and as directed by Engr-in-charge. |
| 130 | (A) Top |
| 131 | (B) Bottom |
| 132 | (E) Left/Right sides |
| 133 | Removing old unserviceable & broken back side of Table bed side and Supply of new back side of 6mm thick comercial plywood BWR quality ISI marked. Complete all as specified. |
| 134 | Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of CHAIR DINING OFFRS, good quality as approved by AGE(I), complete all as specified and directed. |
| 135 | Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with leatherite/fabric or tapestry cloth of DRESSING TABLE STOOL, good quality as approved by AGE(I), complete all as specified and directed. |
| 136 | Removing old unserviceable plastic cane and Supply & Recanning of furniture with 2mm wide half-round cream/white colour plastic cane & 4 mm wide cane for closing the holes including removing old cane complete as specified and shown on drawing. |
| 137 | (A) Chair dinning |
| 138 | (B) Chair writing |
| 139 | (C) Chair easy |
| 140 | (D) Stool dressing CB |
| 141 | Removing old unserviceable parts of Table dressing ladies and Supply and fixing new parts of 18mm commercial block board BWR quality ISI marked laminated with 1mm thick lamination sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror.Complete all as specified & directed by Engr-in-charge. |
| 142 | (A) Top/ Bottom |
| 143 | (B) Sides |
| 144 | (C) Drawer with knob |
| 145 | (D) Looking mirror |
| 146 | (E) Back frame |
| 147 | (F) Back ply of mirror |
| 148 | (G) Sliding mirror |
| 149 | (H) Aluminium chennal for sliding mirror |
| 150 | (J) Back ply of box |
| 151 | (k) Knobs |
| 152 | Removing old unserviceable parts of Table dressing ladies Incl stool and Supply and fixing new parts of 18mm commercial block board BWR quality ISI marked laminated with 1mm thick lamination sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror.Complete all as specified & directed by Engr-in-charge. |
| 153 | (A) Top/Side 18 MM TH PRE LAMINATED MDF AS SPEC |
| 154 | (B) Bottom 12 MM TH PLYWOOD |
| 155 | (C) Drawer with 50 MM LONG 'D' SHAPED STAINLESS STEEL HANDLE AS SPEC. |
| 156 | (D) 5 MM TH. ELECTRO COPPER PLATED MIRROR OF POLISHED SHEET GLASS AS SPECIFIED |
| 157 | (E) TW 25X20 ALROUND MIRROR FRAME |
| 158 | (F) 6 MM TH. PLY WOOD BACK of mirror |
| 159 | (G) 1NOS PER SHUTTER STAINLESS STEEL PIANO HINGE AS SPEC(02 Nos) |
| 160 | (H) 75 MM LONG 'D' SHAPED STAINLESS STEEL HANDLE |
| 161 | (J) 75 MM FOAM 40 D CUSHION COVERED WITH LEATHERITE AS SPEC |
| 162 | (K) 12MM TH PLY OPENABLE SHUTTER |
| 163 | (L) 50mm Dia HEAVY DUTY REVOLVING NYLON DOUBLE WHEELS |
| 164 | (M) Drawer TELESCOPIC Channel |
| 165 | (N) MAGNETIC CATCHER WITH STAINLESS(1NOS), |
| 166 | Removing old unserviceable parts of Hat Stand with Mirror and supply and fixing new parts of 19mm thick particle board. 1.5 mm thick prelaminated teak face sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror complete all as specified and directed by Engr-in-Charge:- |
| 167 | (A) Looking mirror |
| 168 | (B) Back frame. |
| 169 | (C) Back ply of mirror. |
| 170 | (D) Hanging clips |
| 171 | (E) Clamps 4 nos |
| 172 | Removing old unserviceable/missing hard pvc shoe from all types of wooden furniture articles and Supply and fixing new hard PVC shoe.Complete all as specified & shown on drawing and as directed by Engr-in-charge. |
| 173 | Removing old unserviceable top of following furniture articles and Supply and fixing of new top of 18mm thick prelaminated particle board ISI marked phenol formaldehyde bonded including 4 mm beading of 1st class Hard wood(Teak wood) (teak wood) all around the top and apply two coat of french polish to achive glossy finish complete all as specified in drawing and as directed by Engr-in-charge. |
| 174 | (A) Table centre/ 2 tier |
| 175 | (B) Table dining 6/8 person |
| 176 | (D) Teapoy wooden |
| 177 | (E) Peg table |
| 178 | (E) Table writing |
| 179 | (F) Table 3x2 with/witout drawer |
| 180 | Supply and fixing of wooden brackets triangular shaped and size 75X75mm of 1st class Teak wood and fixed to wooden Chairs by using screws & adhesive complete all as specified & directed by Engr-in-Charge. |
| 181 | Removing of old unserviceable Foam cushion and Supply and fixing new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Make: Sleepwell/Courlon/Dunlop |
| 182 | Removing of old faded cushion cover only of a seat or back of SOFA SET 5 /4 SEATER and Supply and fixing new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by AGE(I). Note:-(One Nos of seat or back shall be measured and paid as one unit). |
| 183 | Removing of old/unserviceable and Supply and fixing new 4 x 10 mm thick RIBS moulded along with seat in single piece and PVC seat 4mm thick with holes & screwed with frame of CHAIR DINING JCO/OR'S of good quality as approved by AGE(I), complete all as specified and directed. |
| 184 | (A) Front leg |
| 185 | (B) Rear leg |
| 186 | (C) Side rail with hole |
| 187 | (D) Front/back rail with hole |
| 188 | (E) Stiffener bottom |
| 189 | (F) Arms |
| 190 | Preparation of existing old steel surfaces of furniture item steel of any description and in any postion, filling cavities with necessary putty/filler to achive even and smooth surface and applying one coat of synthetc enamel paint on following itemild steel to achive even and smooth golsy finish complete all specified and directed. NOTE : 1. Painting and polishing shall be done all around on all the exposed surfaces including internal accessories like shelves, draws, staioners, partition steel surfaces with spray painting all as approved by the Engineer-in-Charge.2. Rate quoted by the contractor should be incusive of removing dents/correcting profiles of deshpaed itemild steel/parts to the normal postion.3. Surface and site shall be left neat and clean.4. Work shall be exeucted in Bldgs in users possession within perimeters of Army Area Udaipur or at BSO Yard as directed by Engineer-in-Charge. |
| 191 | All as per item No 01 but Table Bed Side |
| 192 | All as per item No 01 but Chair CB/tubler steel with Arms |
| 193 | All as per item No 01 but Chair CB/tubler steel without Arms |
| 194 | All as per item No 01 but Book Case steel |
| 195 | All as per item No 01 including grinding but Almirah steel Med |
| 196 | All as per item No 01 but Table office Clerk (steel) |
| 197 | All as per item No 01 but Table office officer steel |
| 198 | All as per item No 01 but Teapoy Verandah |
| 199 | All as per item No 01 including grinding but Almirah Large steel 1/2 H,1/2 Sh- |
| 200 | All as per item No 01 including grinding but Almirah Large with sh steel |
| 201 | All as per item No 01 but Table (Steel) 900mmX900mmX760mm- |
| 202 | All as per item No 01 but Table (Steel) 900mmX600mmX760mm- |
| 203 | All as per item No 01 but Chair warting (steel) |
| 204 | All as per item No 01 but Trustle store room (steel) |
| 205 | All as per item No 01 but Rack adjustable 6 tier steel |
| 206 | All as per item No 01 but Side rack steel with tray |
| 207 | All as per item No 01 but Stool Steel 1'x1'x2' |
| 208 | All as per item No 01 but Stool Steel 305x305x760mm |
| 209 | All as per item No 01 but Rack Shoe Steel |
| 210 | All as per item No 01 but Chair Computer |
| 211 | All as per item No 01 but Table Computer |
| 212 | REPAIR TO RACK SHOE STEEL (FD/E6/Map/04) |
| 213 | Removing old unserviceable portion of and Supply and fixing main frame of Rack shoe steel 25mm dia pipe |
| 214 | Removing old unserviceable portion of and Supply and fixing 3mm dia MS wire (9 Nos,equidistant)and 3mm dia MS wire (3 Nos,equidistant) size 700mm x 300mm. All as shown on drg. |
| 215 | Material and Labourfor Rack shoe steel and perpration of surface for painting with spray to complete Rack with one coat of synthetic enamel paints Black completely as directed by engr-in-charge. |
| 216 | REPAIR TO LOCKER BED SIDE STEEL-FD-127 FD-1029 |
| 217 | Removing old & unserviceable leg of locker and supplying and fixing new leg of locker (steel) as per drg. |
| 218 | Removing old & unserviceable handle and supplying and fixing new chromium plated handle 100mm long for locker (steel) as per drg. |
| 219 | Removing old & unserviceable hasp & staple and supplying and fixing new safety type hasp and stapple chromium plated 75mm long, 3mm thick as per drg. |
| 220 | Removing old & unserviceable hanging rod and supplying and fixing new hanging rod of 20mm dia conduit pipe of 1.6mm thick with sockets all as per drg. |
| 221 | REPAIR TO CHAIR COMPUTER/REVOLVING (FD/E6/Map/01) |
| 222 | Removing of old and unserviceable Chair seat and back and Supply and fixing new chair seat and back as per existing make and size approved by Engr-in-Charge. |
| 223 | Supply and fixing lifting jack/shocker after taking out unservicable jack/shocker. |
| 224 | Supply and fixing caster roller pin/ screw type after taking out unservicable caster roller pin/ screw type.Make- ISI Mark |
| 225 | Supply and fixing as per drg arm rest after taking out unservicable arm rest. |
| 226 | REPAIR TO TABLE COMPUTER (FD/E6/MAP/03) |
| 227 | Removing of existing broken damaged top of lower stand of Table Computer of size 300mm x 450mmx18mm thick & supply and fixing of new top of prelaminated partical board of size 300mm x450mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed by Engr-in Charge. |
| 228 | Removing of existing broken damaged bottom of key bd of Table Computer of size 475mm x 440mmx18mm thick & supply and fixing of new bottom of prelaminated partical board of size 475mm x440mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed by Engr-in Charge. |
| 229 | Supply and fixing of New Sliding Assembly made of steel cromium plated for key board (ISI Marked) |
| 230 | Supply and fixing of New Sliding Assembly made of steel cromium plated for drawer & mouse stand (ISI Marked) |
| 231 | Removing of existing broken damaged partical board portion of side stand of Table Computer of size 650mm x 150mmx18mm thick & supply and fixing of Prelaminated partical board of size 650mm x150mmx18mm thick fixing with 06 Nos screws all as shown on drg and as directed by Engr-in Charge. |
| 232 | Supply and fixing of New Steel handle of size 100 (ISI Marked) |
| 233 | Removing of existing broken damaged top of Table Computer of size 900mm x 550mmx18mm thick & supply and fixing of new top of prelaminated partical board of size 900mm x 550mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed by Engr-in Charge. |
| 234 | REPAIR TO ALMIRAH LARGE STEEL1/2 H,1/2 SH And with Sh AND ALMIRAH MEDIUM STEEL 1/2h,1/2 Sh And with/Sh |
| 235 | Remove old unserviceable lock Supply and fixing new brass lock (6 lever) and chromium plated with duplicate key for large/medium almirah steel all as per drg. |
| 236 | Remove old & unserviceable 3 way locking device and Supply and fixing new three way locking devices MS seat cover for almirah steel large / medium as per drg. |
| 237 | Remove old & unserviceable handle and Supply and fixing new almirah handles 125 mm for large/ medium as per drg. |
| 238 | Remove old & unserviceable clips and Supply and fixing new MS shelving clips for almirah medium/large steel as per drg. |
| 239 | Remove old & unserviceable hinges and Supply and fixing new MS door hinges by welding 75mm size for almirah large steel / medium steel as per drg. |
| 240 | Remove old & unserviceable legs and Supply and fixing new legs for almirah steel as per drg. |
| 241 | Remove old & unserviceable shelf and Supply and fixing new shelf for large/ medium as per drg. |
| 242 | REPAIR TO TABLE DINING OR - |
| 243 | Removing old and unserviceable portion of MS square tubing of table dining ORs & supply and fixing of new portion of MS 25mm square tube with 1.6mm wall thickness long by gas welding and standard workmanship complete all as directed for Long Rails |
| 244 | Ditto but for Short rails |
| 245 | Ditto but for Legs |
| 246 | Ditto but for Stiffner |
| 247 | Removing of existing broken damaged table top of the table dining ORs & supply and fixing of new table top of partical board 18 mm thick of size 1.9 meter long and 0.685 meter wide duly covered with 0.79 mm thick alimimunim sheet with full threaded machine. |
| 248 | REPAIR TO TEAPOY VARANDAH |
| 249 | Remove old & unserviceable top of teapoy varandah & Supply and fixing new top made of Prelaminated particale board exterior grade as per drg. |
| 250 | Remove old & unserviceable portion of MS conduit tubing 19/20mm of teapoy varandah & Supply and fixing new pipe by gas welding of 19/20mm conduit tubing upto 6\\" as per drg. |
| 251 | Supply and fixing one nos of 350mm long 20mm dia MS conduit pipe and welding as stiffiners at any side . |
| 252 | Supply and fixing one No of 750mm long 20mm dia MS conduit pipe and welding as centre stiffiners. |
| 253 | REPAIR TO CHAIR CB STEEL WITH ARMS |
| 254 | Remove old & unserviceable second class hard wood seat frame Supply and fixing new second class hard wood seat frame with nut and bolt to conduit pipe for chair CB `A' steel arms, duly canned as per drg. Godrej pattern size 460mm x 450mm duly black polished all as per drg. |
| 255 | Remove old & unserviceable second class hard wood back frame and Supply and fixing new second class hard wood back frame with nut & bolts to conduit pipe for chair CB `A' steel arms, duly canned as per Godrej pattern size 460mm x 410mm duly black polished all as per drg. |
| 256 | Supply and fixing by welding of iron strip size 25mm x 3mm thick and 500mm long with two holes in each strip for fixing the screw to the seat frame of the chairs. |
| 257 | Supply and fixing by welding 04 Nos flat iron 50 x 3mm to a length of 4\\" cut & made to shape both sides of the chair leg each side 02 Nos. |
| 258 | Remove old & unserviceable second class hard wood arm and Supply and fixing of second class hard wood arms for chair CB `A' steel with arms duly black polished all as per drg. |
| 259 | REPAIR TO CHAIR CB STEEL WITHOUT ARMS- |
| 260 | Remove old & unserviceable second class hard wood seat frame and Supply and fixing new second class hard wood seat frame for chair CB without arms steel with nuts & bolts to conduit pipe, seat duly canned as per Godrej pattern of size 380mm x 420mm duly black polished, all as per drg. |
| 261 | Remove old & unserviceable second class hard wood back frame Supply and fixing new second class hard wood back frame for chair CB steel with out arms steel with nut & bolts to conduit pipe, back frame duly canned as per Godrej pattern of size 380mm x 420mm duly black polished all as per drg. |
| 262 | Supply and fixing by welding of iron strip size 25mm x 3mm thick and 420mm long with two holes for fixing the screw to the seat frame. |
| 263 | Supply and fixing by welding of 4 Nos flat iron 50x3mm to a length of 6\\" cut & made to shape both side of chair leg each side 02 Nos. |
| 264 | REPAIR TO TABLE OFFICE CLERK (STEEL)- FD-1004 |
| 265 | Repairs to all existing drawer of steel table office clerk by taking out from table, removing and denting by cutting, welding etc as required and easning and resetting in the table for smooth functioning. |
| 266 | Taking down unserviceable locking arrangement from drawers & supply & fix new brass lever lock (6 lever) with duplicate key including locking arrangement. |
| 267 | Removing of existing broken damaged table top of the table office clerk steel of size 1200mm x 600mm x 18mm thick & supply and fixing of new table top of pre laminated partical board 18mm thick 4mm teak wood edging shall be provided all round of the top & fixed with 75mm long steel screw and apply one coat of black / olive green paint to the steel frame of table , all as shown on drg and as directed. |
| 268 | Removing of existing broken damaged standard PVC Handle and Supply and fixing new standard PVC Handle. |
| 269 | REPAIR TO TABLE OFFICE OFFICER (STEEL) : |
| 270 | Repairs to all existing drawer of steel table office officer by taking out from table, removing and denting by cutting, welding etc as required and easning and resetting in the table for smooth functioning. |
| 271 | Taking down unserviceable locking arrangement from drawers & supply & fix new brass lever lock (6 lever) with duplicate key including locking arrangement. |
| 272 | Removing of existing broken damaged table top of the table office officer steel of size 1680mmx870mmx18mm thick & supply and fixing of new table top of prelaminated partical board 18mm thick 4mm teak wood edging shall be provided all round the top & fixed with 75mm long steel screw and applying one coat of black / olive green paint to the steel frame of table rest all as shown on drg and as directed. |
| 273 | Removing of existing broken damaged standard PVC Handle and Supply and fixing new standard PVC Handle. |
| 274 | REPAIR TO TABLE (STEEL) 900mmX900mmX760mm- |
| 275 | Remove old and unserviceable portion of MS square tubing of table 3x3 and supply & fixing of new portion of MS square tube 25mm 1.6mm wall thickness long by gas welding and standard workmanship complete all as directed for lags |
| 276 | Ditto but for rails |
| 277 | Removing of existing broken damaged table top of the Table 900X900X760mm of size 900mmx900mmx18mm thick and supply and fixing of new table top of pre laminated partical board 18 mm thick 4mm teak wood edging shall be provided all round of the top & fixed with 75mm long steel screw and apply once coat of black/olive green paint to the steel frame of Table rest all as shown on drg and as directed. |
| 278 | REPAIR TO CHAIR VARANDAH WITH CANE |
| 279 | Removing of existing unserviceable old cane from chair varandah and supply and weaving of the same with new plastic cane 4 mm wide, white colour half round of approved quality including applying two coats of white synthetic enameled paint of approved quality on old steel surfaces of chair before canning complete all as directed |
| 280 | Removal of old and unserviceable portion of mild steel conduit tubing of chair varandah and Supply and fixing new portion of 20mm dia mild steel tubing with gas welding and with standard workmanship at four tuck welds where required as per drg and apply two coat of white paint over a coat of red oxide primer on the welding portion to match with existing white paint colour of chair varandah complete all as directed. |
| 281 | REPAIR TO CHAIR WRITING STEEL (MAP) |
| 282 | Removing of old unsv back/seat and supply & fixing new seat/back as per existing size and make complete specified by engr-in-charge. |
| 283 | Supply and fixing as per drg arm rest after taking out unservicable arm rest. |
| 284 | REPAIR TO TABLE (STEEL) 900mmX600mmX760mm |
| 285 | Remove old and unserviceable portion of MS square tubing of table 900x600x760mm supply and fixing of new portion of MS square tube 25mm 1.6mm wall thickness upto 150mm long by gas welding and standard workmanship complete all as directed. |
| 286 | Supply and fixing in replancement the new top table 900x600x760 mm (FD-1008(M) with prelaminated partical board of size 900x600x18 mm with and teak wood edging 4mm thick alround fixed with long steel screw at appropriate distance and applying one coat of black paint/Olive green paint ti steel surfaces of the table complete all as show on drawing specifed and directed. |
| 287 | Removing old broken/missing PVC shoe of following furniture items and Supply & fixing of hard PVC shoe of existing size & shape. Complete all as specified in drawing and as directed by Engr-in-charge. |
| 288 | Chair verandah |
| 289 | Chair steel tubler with/without arms |
| 290 | Table 900X900X760mm steel |
| 291 | Table dining OR |
| 292 | Table office officer/clerk/typist steel |
| 293 | Teapoy Verandah |
| 294 | Material and labour for welding the broken joints of steel furniture or steel portion of wooden furniture by using gas welding (exceeding 5cm but not exceeding 10cm) complete all as specified in drawing and directed. Please Enable Macros to View BoQ information |
