|
| 1 | Sub-Head : Dismantling and Demolishing |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 3 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 4 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 5 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 6 | 100 mm dia pipe |
| 7 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 10 | Sub-Head : Concrete Work |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 12 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 13 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 14 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | Sub-Head : Flooring |
| 16 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 17 | Sub-Head : Roofing |
| 18 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 19 | (i)Single socketed pipes. |
| 20 | 110 mm diameter |
| 21 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 22 | Single tee with door |
| 23 | 110x110x110 mm |
| 24 | Bend 87.5° |
| 25 | 110 mm bend |
| 26 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 27 | 110 mm |
| 28 | Sub-Head : Finishing |
| 29 | 12 mm cement plaster of mix : |
| 30 | 1:6 (1 cement: 6 coarse sand) |
| 31 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 32 | 1:6 (1 cement: 6 coarse sand) |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 34 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 36 | Two or more coats on new work. |
| 37 | Lettering with black Japan paint of approved brand and manufacture |
| 38 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 39 | Old work (one or more coats) |
| 40 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 41 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 42 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 43 | Sub-Head : Repairs to Buildings |
| 44 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 45 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 46 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 47 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 48 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 49 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. |
| 50 | (a) Internal Work- Exposed on wall |
| 51 | Sub-Head : Sanitary Installations |
| 52 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 53 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 54 | 10 litre capacity - White |
| 55 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 56 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 57 | Flat back wash basin of size 550x400 mm. |
| 58 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 59 | Semi rigid pipe |
| 60 | 32 mm dia |
| 61 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 62 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 63 | Sub-Head : Water Supply |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 65 | 20 mm nominal outer dia. Pipes. |
| 66 | 25 mm nominal outer dia .Pipes. |
| 67 | 40 mm nominal outer dia. Pipes. |
| 68 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 69 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 70 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 71 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 72 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 73 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 74 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 75 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 76 | 15 mm nominal bore with 45 cm length. |
| 77 | Sub-Head : NEW TECHNOLOGIES AND MATERIALS |
| 78 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 79 | 50 mm average thickness |
| 80 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 81 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. |
| 82 | Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. |
| 83 | Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super- Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc. |
| 84 | (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument) |
| 85 | 50mm thick in Grade M 25 with cement content not less than 330 kg per cum |
| 86 | Sub-Head : MARKET RATED ITEMS |
| 87 | Deduct for taking into posession the unserviceable dismantled materials including carriage: |
| 88 | Unserviciable Brass / PVC Bib/stop cocks/pillar tap |
| 89 | Dismantled damaged Gun metal gate valve 25mm to 40 mm. |
| 90 | Dismantled damaged CI / GI pipes. |
| 91 | Unserviciable flushing cistern |
| 92 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, takingout & refixing of grills where required etc, all complete as per the direction of the Engineer-in-charge. |
| 93 | Engaging labour for cleaning of open surface drains of any size, roof, terrace, chajjas at any floor at any height including all T & P, removal of debrishes, sullage and disposal all complete as per direction of Engineer-in-charge. |
| 94 | Providing and fixing CPVC Ball valve approved quality with handle in CPVC pipe line etc complete as per direction of Engineer-in-charge: |
| 95 | 25 mm diameter |
| 96 | 40 mm diameter |
| 97 | Providing and fixing CPVC Union in CPVC pipe line including cutting the pipe etc complete as per direction of Engineer-in-charge |
| 98 | 25 mm diameter |
| 99 | 40 mm diameter |
| 100 | Providing & fixing \\"S\\" or \\"P\\" trap including dismantling sorrounding concrete area and repalciing with new PVC trap with sealing of gap/joint with mixture of white cement and adhesive made of Dr. fixit i/c removal of rubbish, clay debrishes, sludge deposit and making top finish with concreting etc all complete as per direction of E.I.C. (a) For Bath , WC & Kitchen trap |
| 101 | Grinding of Granite/Kota/Marble surface evenly with machine fitted with grit blocks (No-60 / 120 /320 as per floor requirement) including removing all grinding mud cleaning and mopping the surface. After final polish oxalic acid to be applied followed by watering and rubbing with woollen rags including all labour and materials complete as per the direction of Engineer in Charge. Please Enable Macros to View BoQ information |
