|
| 1 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as specified, stacking and spreading as directed including dewatering unless providedelsewhere, preparing the bed for the foundation and necessary backfilling, ramming, watering completeincluding shoring and strutting. |
| 2 | Providing soling using 80mm size trap metal in layers of 15 cm each including filling voids with and, ramming, watering etc. complete |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 4 | Providing laterite stone masonry in cement mortar 1:6 in Cu. M. foundation and plinth including striking joints on the unexposed faces and watering complete. (Laterite stone six sides cut and thickness of mortar joints shall be 12mm max.) |
| 5 | Filling in plinth and floors with approved excavated material in 15cm to 20 cm layers including watering and compacting etc. |
| 6 | Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete.(Laterite stone six sides cut and thickness of mortar joints shall be 12mm max.) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 9 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase,newels, chajjas, lintels pardis, copings,fins, arches etc. as per detailed designs, drawings andschedules.includingcutting,bending,hooking the bars,binding with wires or tack welding and supporting as required complete |
| 10 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with out neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 11 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary. |
| 12 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring |
| 13 | Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 14 | Providing 25mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc.Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish. |
| 15 | Providing sills of polished Kadappa stone 25mmto 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. |
| 16 | Providing and fixing Cement conrete door shutter market rate. |
| 17 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 18 | Providing and fixing heavy duty interlocking concrete RUBBER MOULD GLOSSY PAVING BLOCKS 60mm thick factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks in M-30 grade of approved size and shape as specified 50mm in gray cement and top surface 10mm in white cement with coloured pigment including cost of all materials manufactuing curing transportaioon of blocks to work site including loading unloading and stacking as directed laying paving blocks in position over prepared bed of sand of 50 mnm thickness including necessary excavation in all startas spreading blindage of fine sand over the prepared bed, compacting blocks by plate vibrator etc, complete |
| 19 | Providing and fabricating structural steel work in rolled sections ,fixed with connecting plates or angle cleats in main and cross beams,hip and jack rafters ,purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating , hoisting , erecting , fixing in position , making riveted /bolted /welded connectio s and one coat of anticorrosive painand over it two coats of oilpainting of approved qual |
| 20 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including Strap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. |
| 21 | White Glazed Earthenware Squatting plate (Gents Urinal),etc complete |
| 22 | White Glazed Earthenware Squatting plate (Ladies Urinal),etc complete(Ladies Urinal) |
| 23 | Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps,brackets,rubber plugs and brass chain,stop tap,chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. |
| 24 | Providing and fixing 15 mm dia. (Heavy type) down bib/stop tap of brass of approved quality & make including necessary sockets, union nut testing etc complete. |
| 25 | Providing and fixing H.D.P.container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation incl.of delivery upto destination hoisting and fixing of accessories such as inlet outlet overflow of all tanks capacity above 1000 to 20,000 litres. |
| 26 | Providing, laying and fixing P.V.C. pipe of 15mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.e. |
| 27 | Providing, laying and fixing P.V.C. pipe of 25 mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 28 | Providing and fixing of colour coated zinc alluminium ® AZ 150 (min.150 gms/Sqm mt.total on each side) profile sheets for roofing. The feed material is manufacture out of nominal 0.45 mm base metal thickness (BMT) (0.5 mm TCT) high strength steel with min 550 MPA yield strength metalic hot dip coated with alluminium zinc alloy (55% alluminium 43.4% Zinc 1.6% silicon) with CLORBOND (R) Steel quality super durable polyster paint coat (With inorganic pigment) The paint shall have a total coating thickness of nominal 35 mm comparising of nominal 25 mm exterior coat on top surface and nominal 10 um Reverse coat on back surface. profile sheet shall have nominal 950 1050 mm effective cover width and nominal 35.30 mm ribs and sublet square fluting in the 5 pan of nominal 180-250 mm c/c. The end rib shall be design for anticapacity groove and return leg . The feed material shoold have manufacture product details mark a regular interval including fasterners with minimum fasterned with 25 mm um zinc tinalloy coated. Hex head self drilling to etc complete. S.S.R. 2017-18 P/I 252/38.35 756.00 |
| 29 | Providing and fixing name board of size 1.00 metre x 1.08 metre of M.S. sheet and 25x25x6 mm M.S. angle including fixing in ground, painting and lettering etc. complete. Please Enable Macros to View BoQ information |
