|
| 1 | Cleaning grass and removal of rubbish up to a distance of 50 meters outside the periphery of the area as directed. |
| 2 | Cutting down trees including cutting trunks & branches and stacking the material with all lift including uprooting and refilling the pit with material etc. complete as directed. (excluding extra material required for refilling) a. above 30 cm to 60 cm girth |
| 3 | Excavation in Soft Strata /Soil/ Hard murum / Hard man / kankar / pebbles/soft rock in all width including depositing the material as directed with all leads and lifts including boulders of size less than 0.10 Cum. including dressing etc. ( In Dry condition) |
| 4 | Excavation in hard rock of all toughness by breaker including boulders above 0.6 m dia.(0.113Cum) minimising damage to side slopes of excavation and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, levelling bed etc., complete with lead up to 1 km and all lifts as directed . |
| 5 | Removing wet silt from canal bed with 15 mtr.Lead and all lift including depositing the excavated stuff etc. Complete as directed. |
| 6 | Providing and fixing anchor bar of 25 mm diameter 3.375 m length with resin bond cement capsule anchorage through shaft including drilling holes, inserting grout capsule, driving anchor, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc complete with all lifts as Directed . |
| 7 | Providing and fixing anchor bar of 32 mm diameter 4.32 m length with resin bond cement capsule anchorage through adit/ itself including drilling holes, inserting grout capsule, driving anchor, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc complete with all lifts as Directed. |
| 8 | Providing and laying in situ cement concrete of grade M-15 of trap/ granite/ gneiss/ quartzite/ graded metal for PCC with or without surface reinforcement/ RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Batching Plant and Transit mixer with centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts etc. complete as directed. |
| 9 | Providing and laying in situ cement concrete of grade M-25 of trap / granite / gneiss / quartzite / graded metal for RCC works of columns, beams and slabs, diaphragm walls, Road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts asdirected |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed. |
| 11 | Providing & Erecting M.S. pipes made out of MS plate conforming to IS 2062:1992 including procurement of plates, gas cutting to required size, rolling, tack welding, assembling in suitable lengths to form pipes on automatic welding machine and transportation upto 500 m.The welding Shall be ERW/SAW using electrodes having weldmark E7018 (Low Hydrogen electrodes) and forming 'V' edge on both ends of pipes, Including third party inspection charges, lowering and laying to correct position on prepared bedding or on pedastals or chairs, field hydraulic testing at specified test pressure as per IS 5822: 1994 sec 11, field welding to join pipes after laying, Radiographic (5%) and ultrasonic (10%) testing of welds including all equipments submitting report, expert personnel required for testing, interpreting and submitting report along with developed film where applicable all incidental charges etc complete as per IS - 3589:2001 and as per specifications (No negative tolerance in thickness is permissible). |
| 12 | Providing & applying Liquid epoxy coating system to the interior surface of Rising Main Pipes as per Annex - B of IS 3589:2001,with one coat of Zinc rich epoxy primer (90% zink ,DFT 40 micron , coverage 9 Sqm / lit) and three coats of coal tar epoxy paint (DFT 120 X 3 micron coverage 5 Sqm/Lit/coat) including cleaning the surface to the satisfaction of Engineer in charge by sand blasting /chemical cleaning / scraping removing oil, grease, other foreign materials including all necessary material, labour with all leads and lifts etc. complete.As directed. |
| 13 | Backfilling upto ground level behind the canal structures etc. complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete as directed. |
| 14 | Dewatering by pumping out water collected with Diesel or Electrical pumps including cost of all materials, machinery, labour, providing sump and all other ancillary operations when ever necessary etc. complete under specific and indispensable circumstances with prior approval from competent authority with authentic evidence of records justifying dewatering etc. complete as directed . |
| 15 | Manufacturing, Supply Service Gate Leaf of size 1.2 x 1.2 M. Which includes material, labour, handling charges etc. Complete job |
| 16 | Manufacturing, Supply of 30 Ton Capacity Hand Operated Screw Stem Hoist etc. Complete job |
| 17 | Manufacturing & erection of Embedment Parts of Service Gate Which includes material, labour, handling charges etc. Complete job |
| 18 | Mfg.& Erection of Bonnet cover,Stiffing Box of Service Gate Which includes material, labour, handling charges etc. Complete job |
| 19 | Manufacturing & Erection of Bulkhead and Manhole and WYE branch Thrust Block penstock .Which includes material, labour, handling charges, transportation etc. Complete job |
| 20 | Repair & Maintenance of P.O.E.G.of size 3.650 x 3.50 M. with Hoist 140 Ton cap. & Alied Works |
| 21 | Providing of D.G.Set on hire at site on hourly basis for all mechanical work |
| 22 | Transporation Charges |
| 23 | Providing and laying in situ cement concrete of grade M-30 for trough of aqueduct etc. of trap / granite / gneiss / quartzite / graded metal with Batching Plant and Transit mixer including centering, shuttering, scaffolding including placing, compacting, curing etc. complete with all lifts etc. complete as directed. |
| 24 | Manufacturing, Erection, Rolling Shutters all materials, Labour charges, machining and machinery charges, with leads & lifts at site etc complete as per drawings and instructions of Engineer-in-Charge. |
| 25 | Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls, road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. . with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed. |
| 26 | Providing & fixing Neoprene Bearing as per standard specification etc. complete. (as per IRC-83 Part-II) |
| 27 | Providing and laying in situ cement concrete of grade M-30 for trough of aqueduct etc. of trap / granite / gneiss / quartzite / graded metal with Batching Plant and Transit mixer including centering, shuttering, caffolding including placing, compacting, curing etc. complete with all lifts etc. complete as directed |
| 28 | Providing and fixing ISMB-300 Steel joist below pedsteals including cutting , transporation & fixing in concret pier cap etc. complete. |
| 29 | Providing and applying single coat of epoxy primer (4.42 sq m per kg) (resin : hardener, 2:1) on old UCR / concrete surface etc. Complete as directed. |
| 30 | Providing & applying Two Coat of Waterproof Cement paint of approved manufacture and colour to the new plastered surface, including scaffolding preparing the surface, watering for two days complete. |
| 31 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 32 | Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour,machinary ,hand packing / wedging stone chips, finishing etc.,complete with lead upto 1 km and all lifts as directed. |
| 33 | Item No.2:- Excavation of tunnel through adit / itself in all types of rock by drilling and smooth control perimeter blasting, mucking, disposing muck in muck yard, lighting, ventilation inside tunnel Including dewatering considering cross section of tunnel as D-shaped with initial lead of 1.5 Km (From average face to Dump yard including length of Adit) etc. Complete. (Specification: Section 4.1) |
| 34 | Item No. 3 :- Providing and fixing steel rock bolts of 25 mm diameter and 3.10 m length with resin bond cement capsule anchorage through adit / itself including drilling holes, inserting grout capsule, driving bolt, fixing 10 mm thick plate and nuts and tightening the same by torque wrench after hardening of cement grout, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc complete with all lifts. |
| 35 | Item No.4:- Providing, fabricating and laying structural steel for permanent supports in tunnel including cutting, bending, erecting as per design and drawing or as directed etc. with all leads and lifts etc. complete. |
| 36 | Item No 05 :- Providing and laying in situ cement concrete of grade M-25 of trap / granite / gneiss / quartzite / graded metal for RCC works of columns, beams and slabs, diaphragm walls, Road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts asdirected |
| 37 | Removing wet silt from canal bed with 15 mtr.Lead and all lift including depositing the excavated stuff etc. Complete as directed. |
| 38 | Item No 07 :-Providing and laying in situ cement concrete of grade M-25 of trap / granite / gneiss / quartzite / graded metal for RCC works of columns, beams and slabs, diaphragm walls, Road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts asdirected |
| 39 | Item No 08 :- Drilling 52-57 mm dia grout holes by percusson drilling equipment through masonry / rock in stages as directed including cleaning and flushing the drilled holes, conveyance of all materials and equipments for all other ancillary etc complete. As Directed by Engineer-In-charge. |
| 40 | Item No 9 :- Providing & injecting cementatious grout as per specification in the drilled holes at required pressure including supplying, conveying cement ,micro silica,fly ash, admixtures (Accelerator, Binder,Superplasticizer) , grouting machinery with packersystem etc complete. As Directed by Engineer-Incharge |
| 41 | Item No. 12 :-Providing and applying wet shotcrete (M-25 : 10MSA) 50 mm thick in two layers through adit / itself of tunnel including admixtures, neccessary machinery , labours ,scaffolding, lighting, drainage, ventilation with providing and all other ancillary operations etc. complete with all lifts. |
| 42 | Item No. 13 :-Providig and fixing welded mesh fabric for guniting of mesh size 75mmx75mm and 10guage thick including scaffolding etc.complete |
| 43 | Dismantling R.C.C. works and removing the stuff to a distance of 15 m and all lifts including stacking etc. complete as directed.. |
| 44 | Supplying, erecting, testing and commissioning of diesel generating set with alternator of 82.5 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 14.0 ltr/hr @75% loading. Both the engine and alternator direct coupled on common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 145 ltr etc., on provided M20 grade CC foundation as per specification no. GEN-DG |
| 45 | Royalty |
| 46 | M-15 (20MSA) |
| 47 | M-25 (20MSA) |
| 48 | M-30 (20MSA) |
| 49 | M-20 (20MSA) |
| 50 | M-25 (10MSA) |
| 51 | Insurance Please Enable Macros to View BoQ information |
