|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes |
| 8 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 10 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 11 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 12 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.25 mm nominal dia Pipes |
| 16 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 17 | Providing & installation of 250 LPH RO Plant alongwith required fitting/accessories and equiments as per Manufactures's specifications.detais of items mentioned as below: (i) Raw water storage tank, Make: Kaveri, Capacity: 1000Lts =01 No (ii) Raw Water feed pump, Make: Crompton/Lubi, kW: 0.375, Power:1-phases, MOC: CI = 01 No (iii) Pressure Sand Filter, Model : AB-SF-1, Flow rate max: 1000lts/hr., Flow rate min: 200lts/hr., Operating pressure Max: 3.5kg/cm2, Operating pressure Min: 1.8kg/cm2, Filter media: Graded Sand -8mm, 2mm & 1mm, MOC Vessel: FRP, Diameter: 250mm, Height: 1350mm =01 No (iv) Activated Carbon Filter, Model: AB-SF-2, Flow rate max: 2000lts/hr, Flow rate min: 200lts/hr, Operating pressure Max : 3.5kg/cm2, Operating pressure Min : 1.8kg/cm2, Filter media: Graded Sand & Carbon, MOC Vessel: FRP, Diameter: 330mm, Height: 1350mm= 01 No (v) Antiscalant dosing pump, Make: Initiative, Capacity: 4 LPH @ 4 kg/cm pressure, Chemical tank capacity: 60Lts, Power: single phase -5amps=01 No (vi) RO System 250LPH, Skid: SS304, Control panel: Aster Make – 1No, Membrane: 1 No, Make: Dow (Filmtech)/Polymex, High Pressure pump: CNP, CDL2-11, 1 -Phase 1.5KW, Membrane Housing: Make: UKL, 1 -No, Rotameters: 200-1200 – 2 No’s Pressure gauge: 2 No’s, Pressure switch: 1 No, Conductivity Indicator= 01 No (vii) Treated water storage tank, Make: Kaveri, Capacity: 500Lts (viii) UV System, Make: Alfa, Capacity: 500LPH, MOC: SS304 (ix) Inter connecting piping, 1” PVC/ CPVC pipeline with required fittings From raw water tank – Raw water pumps– Sand filter – Carbon filter – Softener outlet, Maximum: 30-Mts (x) Installation and commissioning, Complete installation, commissioning and training=01 No (xi) Fitting Charges =01 No Please Enable Macros to View BoQ information |
