|
| 1 | Supply & Fixing of 12.5 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 3 mm top dia minimum 150 mm bottom dia 310 mm base plate 25 mm thick suitable for wing velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as had frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site regiment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect.(Bajaj/Philips/Wipro or other brand approved in UPPWD) with UPSIDA prescribed Logo |
| 2 | Supply & fixing of factory wired integral 200 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection (with 5 years of warranty) complete in all respect,Cat.-AA(Bajaj/Philips/Wipro or equal brand approved in UPPWD) |
| 3 | Supply and fixing 25A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with ML-3 contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. complete in all respect. |
| 4 | Supplying and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. (Make-Havells/Polycab/Grandley or equal brand as approved by E/I.) |
| 5 | Supplying and laying of 25 sq.mm 3.5 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. |
| 6 | Supply & Laying of 63 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc in existing treanch. including cost of material,labour and T&P. |
| 7 | Supply & fixing of 16 sq. mm 4 core brass nickle plated compression gland for PVC insulated cable complete in all respect. |
| 8 | Supply & fixing of 16 sq. mm 4 core size pin or plan type copper tin plated socket/lug to cable leads with insulated tape and making connection to point complete in all respect. |
| 9 | Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head line LT pole complete with GI fitting including material,labour and T&P as per SIDC Sch item No. 25A.1(LS 6.0 mtr for each HM) |
| 10 | Supply & fixing MS clamp made out from 50x6mm MS flat for securing GI Pipe/HDPE with ST pole. |
| 11 | Providing & fixing 32mm x6mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. |
| 12 | S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing UPPWD Sch. No. 701 |
| 13 | Supply & Fixing of 4.0 Mtr. long Decorative Ornamental Pole duly PU (Poly Urethane) Painted made of high tensile GI Steel Pipe.The Top section of pole must have Cast Aluminum Embellishments through out the length. Base Plate size 350x350x12mm with PCD of 350mm. Foundation bolts set of M16x450mdeoorative pole made of Mild Steel with a total height of 4mtr above ground level with single arm bracket of ornamental decorative street light 60W and predefined laser cut pattern in house laser machine in the top portion of the bracket of the pole as per design. Pole bottom base section shall be 220x220x1000mm, 2mm thiclmess column with three side predesigned laser cut and illumination. the surroundings in 20W with notioeable mode, top section pole of 90x3000x3mm & top bracket with laser cut pattern design one side of IOOOmm to hold the street light of 60W as per shared drawing. The base plate of pole shall be of size 350x350x10mm. Provision for inside termination box with 4way connector & Inoa 6 AMPS MCB for local isolation. Light fixture shall be made of aluminium of size 600x580mm of street light distribution of 60W for area lighting. Light output of souroe is more than 110lm/ watt, CRl>80, SPD 4k, operating voltage 140-270V. Fitting is IP65, wired with Branded LED and constant current driver. Proper thermal management for longer life of fixture. Led burning of 50,000 hours. The pole is coated with UV stabilized powder coat and cured in in-house powder coating machine. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all aooessories & foundation bolts. mx 4 Nos made of EN8 grade steel should be used only for erection. A lockable door of suitable size should be provided at bottom section for termination and connection with backelite sheet and connector, MCB, foundation bolts, Bottom dia-350mm up to 1200mm height from base plate.Top section dia 90mm & toleranoe as per IS code or approved by engineer in charge, Supply and fixing of decorative 60 Watt LED Post top indirect/suspended light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect with 5years warantee.Technical specification, make & profile as approved by engineer in charge.CAT AA. |
| 14 | Supply & fixing of M.S Earthing Rod (2500x20mm) in vertically ground level and connecting the pole with help of 6 SWG GI wire including cost off all material , men and TNP. |
| 15 | Supply and wiring of sub main with 02 nos.of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as directed E/I |
| 16 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (c) 25 sq. mm |
| 17 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated, underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer- incharge as per UPPWD sch. no. 503 (j) 25 sq. mm 3.5 core |
| 18 | Supply & fixing 130 W LED Street light having die cast aluminium body and diffuser with driver set suitable for 130 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AAA (Crompton/Philips with 5 year warrenty against defects,damaged & missing) Make: Cormpton/Philips/Bajaj/Wipro. |
| 19 | S/F of street light junction box made of SMC material complete with 4 way terminal block, cable gland etc. |
| 20 | S/F of 6 Amp to 32 Amp SP MCB (10KA) B curve |
| 21 | Supply & fixing 32mm dia,1.20M long GI bend pipe with 02 nos. clamp of 50x6mm MS Flat suitable for fixing street light on ST pole including cost of men and T&P. |
| 22 | Suppy,laying & drawing of 3x1.5 Sq mm PVC insulated copper cable for Street/flood lights connection in existing pipe/surface/air as required including cost of material, men and T&P.(Havells/Polycab/Grandlay) |
| 23 | Supply & fixing 40A TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of digitel/time switch TSO 100 series with ML-3 contactors,HRC fuses/MCB/MCCB/ isolating switch metering instrument & instrument box with CT's etc or as directed . Design & material will be approved by Engineer in charge. |
| 24 | Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.The Borad Should be installed within 07 day of signing of Contract Boand.) |
| 25 | Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 26 | Supply, Sagging, tensioning of LT AB Cable (3x120 + 1x95 + 1x16) sqmm. |
| 27 | Suppy and Fixing clamps for LT T-off with nuts and bolts |
| 28 | Suppy and Fixing J Hook |
| 29 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect UPPWD 634 |
| 30 | Supply & Laying of 160 mm HDPE pipe (by manual trenchless horizental boaring) ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750-1000mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.(Rate w/o GST) |
| 31 | Supply & erection of stay of Composite mains for ST pole with GI anchor plate (152X152X6mm) stay rod (16mm dia X 1.85 m Iong),GI stay bow (16 mm dia rod,thimble,double stay tightener,clamps & stay wire (GS 7/3.15 mm) including grouting in 1:4:8 ratio of cement concrete using coarse sand,over burnt brick ballast as per direction of engineer in charge complete in all respect Please Enable Macros to View BoQ information |
