|
| 1 | Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-35 129 Kg in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. (Botam J1 part GI) as per uppwd schedule |
| 2 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver setsuitable for 150 Watt. Confirming to IP 66 Protection complete in all respects CAT AAA (Crompton/Philips with 5 year warrenty against defects,damaged & missing) Make: Cormpton/Philips/Bajaj/Wipro. |
| 3 | Supply & fixing 120 W LED Street light having die cast aluminium body and diffuser with driver set suitable for 130 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AA (Crompton/Philips with 5 year warrenty against defects,damaged & missing) Make: Cormpton/Philips/Bajaj/Wipro. |
| 4 | Providing of decorative pole made of mild steel with a total height of 7 mtr above ground level with single arm bracket. The base plate of the pole shall be of size 350x350x12mm. Pole bottom base section shall be 220x220mm, length 1500mm, 4mm thickness with predesigned laser cut to illuminate the surroundings in 20W with noticeable mode, next section pole of diameter 76x5500x3mm with single arm bracket of 1mtr to hold the street light fixture. Provision for inside termination box with 4 way connector & 01 No. 6 Amp MCB for local isolation. The pole is primarily coated with primer, secondary epoxy resin and top coated with UV stabilized powder coat and cured. The decorative pole should be suitable for outdoor lighting application, including foundation bolts and fastener complete in all respect. As per AOR Attached with 03 year maintenance & warranty on manufacturing. Techinical Specification (GTP) to be Approved by Ell as per drawing attached. |
| 5 | Supply and fixing of LED 90 watt Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 Watt. Confirming to IP 66 Protection complete in all respect.UPPWD 1423 (Bajaj, Crompton, Philips, Wipro make) |
| 6 | Strengthening of ST/Octogonal pole/High Mast/Panel, foundation by providing new concreting including broken of weak foundation, excavation below upto Ground level, Surface finishing and painting with white cement and dark yellow colour cost of all material men and T&P complete in all respect. |
| 7 | Supply & fixing 32mm dia,1.5M long GI bend pipe/Designed with 02 nos. clamp of 50x6mm MS Flat or Top cap Type, suitable for fixing street light on ST pole including cost of men and T&P. |
| 8 | S/F of street light junction box made of SMC material complete with 4 to 8 way terminal block, cable gland etc. |
| 9 | S/F of 6 Amp to 32 Amp SP MCB (10KA) B curve Cat B |
| 10 | Supply & fixing pole earthling of pole by inserting MS Rod 20x2500mm in vertically ground level and connecting the pole with the help of 6 SWG GI wire including cost of all material, men and T&P. in industrial area as per UPSIDA/UPPCL Technical specification. |
| 11 | S/E of \\"D\\" clamps of 38mm X 6mm flat iron for wall/ roof type service bracket with bolts, nuts etc, complete in all respects including painting with aluminium paint |
| 12 | Supply and laying of 16 sq mm 4 core aluminium conductor PVC insulated , armoured, served ,sheathed cable 1100 v grade in existing pipe/surface/pole hume pipe etc.( Make- Havells/Polycab/Grandley) |
| 13 | Supply & Laying of 63 mm HDPE PN6 (3.8 mm wall Thickness ) pipe ISI marked along with all accessories like socket, bend, couple etc. confirming to IS 14333-1996 complete with fitting and cutting jointing etc direct in grownd 75 cm below ground level including excavition and refilling the trench but excluding sand cushining and protective covering etc. |
| 14 | Supply & fixing 40A TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of digitel/time switch TSO 100 series with ML-3 contactors,HRC fuses/MCB/MCCB/ isolating switch metering instrument & instrument box with CT's etc or as directed . Design & material will be approved by Engineer in charge. with Glands ,Socket Lugs, pvc Tape etc. |
| 15 | S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr, from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing UPPWD Sch. No. 701 |
| 16 | Providing & fixing 35mm x6mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. 5 mtr each earthing. |
| 17 | Painting letter ( Pole no. ) 2.5 cmm up to 8.0 cm size complete on street light pole/panel/other electrical properties under UPSIDA including cost of all material , men and T&P. UPPWD CIVILSOR Sch Item Mno.817, Ch-26 |
| 18 | Supply and wiring of submain with 2 number 2.5 sqmm FRLSH PVC insulated single core multistranded copper conductor cable complete in all respects complete. Including cost of open surface running 3 mm thick heavy duty pvc Conduit with 2 nos Clamps =10x60x3+10x140 |
| 19 | Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head line LT pole complete with Gl fitting including material, labour and T&P as per UPSIDC Sch item No. 25A. 1(LS 6.0 mtr for each HM) |
| 20 | As in item no.1311(B) but in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm.FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit. ( 10 mtr Each)= 20x60+10x140=2600 |
| 21 | Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respects. |
| 22 | Supply & fixing of LED light Strip with driver on street light pole at central verge road no. 1 &2 including cost work T&P men and material complete in all respect. The LED strip should be in tri Colour as red, white and green (each colour 6 mtr.respectively.) With 02 Year warranty against defects/damage/missing. |
| 23 | Providing operating cum maintenance staff of the entire street light network for routine maintenance of street lighting system, administrative, site office and staff colony etc including dismantling & re fixing of other street lights of UPSIDA with travelling expenses etc. Electrician 01 nos) |
| 24 | Cost of material spares, wire, fuses, small accessories, alum. Lug up to 16 sq.mm, small cable gland, insulation tap,plastic tie, screw, nut & bolts, old cloth, cleaning spray and other small associated required for up-gradation work etc. |
| 25 | Dismantling & re-grouting of street light/Steel tubler (upto 12 Mtr long) Tilt/sick bend pole in 1:3:6 ratio cement concrete with stone pad including strengthening of pole by providing additional 04 Nos. support of 65x65x6mm or higher size MS angle in suitable length with the help of welding/cutting as per technical specification. |
| 26 | Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.The Borad Should be installed within 07 day of signing of Contract Boand.) Please Enable Macros to View BoQ information |
