|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth within all lead and for all lift as directed by Engineer-in-Charge. a) All kinds of soil as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 2 | Excavating holes more than 0.10 cum & up to 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within lead and lift. a) Ordinary rock as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km, also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc., complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :a) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :a)1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :a)1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for :a)Foundations, footings, bases for columns as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for :a) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 9 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 11 | Relocation of : Animlal meri go round see-saw Dia 7'FtSafe Area : Dia 12'FtAge Group : 3 to 10 YearsUsers at a Time : 4 NosIncluding dismantling from existing place and fixing at new location with transportation, dismantling and fixing with concrete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 12 | Relocation of : Cristal Maze having Product Area : 8.2'Ft x 8.2'FtSafe Area : 11.5'Ft x 11.5'FtAge Group : 5 to 12 YearsUsers at a Time : 4 to 6 NosIncluding dismantling from existing place and fixing at new location with transportation, dismantling and fixing with concrete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 13 | Relocation of : FRP tripple wave slide having 5' Ht.FRP Tripple Wave SlideProduct Area : 13.5'Ft x 8.3'FtSafe Area : 19.5'Ft x 14.3'FtAge Group : 4 to 12 YearsUsers at a Time : 14 NosIncluding dismantling from existing place and fixing at new location with transportation, dismantling and fixing with concrete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 14 | Relocation of : Deluxe Multi Seater See SawProduct Area :8.5'Ft x 1.2'FtSafe Area : 15'Ft x 5'FtAge Group : 3 to 10 YearsUsers at a Time : 4 NosIncluding dismantling from existing place and fixing at new location with transportation, dismantling and fixing with concrete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 15 | Relocation of : 8' Lg. Roto Crawling TunnelProduct Area : 8'Ft x 4.5'FtSafe Area : 14'Ft x 7.5'FtAge Group : 3 to 8 YearsUsers at a Time : 6 NosIncluding dismantling from existing place and fixing at new location with transportation, dismantling and fixing with concrete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 16 | Relocation of : Iron Outdoor Garden Swings, 2 SeaterProduct Area : 8'Ft x 4.5'FtSafe Area : 14'Ft x 7.5'FtAge Group : 3 to 8 YearsUsers at a Time : 6 NosIncluding dismantling from existing place and fixing at new location with transportation, dismantling and fixing with concrete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 17 | Supplying, filling, dressing and lavelling of plyground with fine sand including all lead and lift complete in all respect as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 18 | Providing and fixing M.S welded mesh (Jali) of required width in mesh size 50x50mm made of M.S. wire of dia 3mm including necessary welded or nuts, bolts and washers as required complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 19 | Providing weep holes in brick masonry/stone masonry/ Plain cement concrete wall/reinforced cement abutment wing wall, return wall, Retaining wall, and breast wall with 110 mm dia PVC pipe extending through the full width of the structure with slope of 1:20 with in all lead, lift as per entire satisfaction and direction of Engineer-in-charge. Please Enable Macros to View BoQ information |