|
| 1 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or dry and pointed complete all as specified and as directed by Engr-in-Charge |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness etc below or above ground level incl floor, hearth, tiles if any and removing the rubbish off the premises complete all as specified and as directed by Engr-in-Charge |
| 3 | M&L for hard core of guage n.exc.63mm using broken stone aggregate spread, levelled, watered and rammed to a true surface. |
| 4 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) 100mm thick as in sub base of foot paths, pavements etc finishing the surface even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 50mm thick sand cushion all as specified and as directed . |
| 6 | M&L for plain cement concrete type B-2, 1:2:4 using 40mm graded aggregate finished the surface even and smooth without using extra cement 100mm thick as in hard standing appron etc all as specified and directed. |
| 7 | M&L Forming 65mm deep x 10mm wide construction joints filled with sealing compound Grade `A' all as specified and as directed by Engr-in-Charge |
| 8 | Demolition of cement concrete of any description and in any position complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 10 | Dismantling of posts or struts (Wood, Steel or RCC) of any section including taking out embedded portion from natural ground and making good disturbed ground complete all as specified. |
| 11 | Dismantling of fencing wire mesh any size and description (Chain link fencing) all as specified and directred. |
| 12 | Excavation in post holes not exceeding 0.5 Cum and getting out, and removing surplus soil to a distance not exceeding 50 mtr in hard / dense soil incl returning filling in soil, spreading, levelling, watering and well ramming in layers n xec 25 cm all as specified and directed. |
| 13 | M & L for PCC 1:4:8 type D2 (40mm Graded aggregate) in foundation, filling and mass concrete all as specified and directed. |
| 14 | Dismantling mild steel work of any description not otherwise provided for complete. |
| 15 | Supply only mild steel angles, bars, flats etc as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe-290 Gde E-165 All as specified and directed. |
| 16 | S & F for Mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 17 | Supply only mild steel bolt with hexagonal or square head one end and screwed the other or screwed both ends each screwed is to be fitted with washers and one hexagonal or square nut exceeding 10cm long n.exc 15 cm long dia mtr of neck exc 11 to 15 mm complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply only PVC coated ( 1mm thick) chain link fencing exc 2 kg but n.exc 3.5 kg per sqm with size of mesh 50x50mm and thickness of wire n.exc 2.83mm , incl 6mm dia wire, PVC coated for support/line wire to chain link fencing complete all as specified and directed by Engineer-in-Charge. |
| 19 | Fixing only of PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete all as specified and as directed (Supply of MS line wire and flat iron, bolt & nuts measured & paid separately) |
| 20 | M&L for preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified. |
| 21 | Preparation of new or previously untreated steel surfaces & applying a two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth,not otherwise described. Please Enable Macros to View BoQ information |
