|
| 1 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) DSR NO. 13.1.2/2023 (Outer and Inner Side of Building) |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead (Of area beyond 3 sq. metres) DSR NO. 15.12.2/2023 |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead (For thickness of tiles 10 mm to 25 mm) DSR No.15.23.2/2023 |
| 4 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead(Thickness above 10 mm up to 25 mm) DSR NO. 15.39.2/2023 |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR No. 15.56/2023 |
| 6 | Providing and laying rectified Glazed CeramicWall tiles of size 300x300 mm or more thickness to be specified by the inufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. DSR No. 11.40/2023 |
| 7 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.(Glazed Vitrified tiles Matt/Antiskid finish of size) Size of Tile 600 x 600 mm DSR No.11.41 A.3.1/2023 (STAGE FLOOR) |
| 8 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets land galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm |thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one |flange fixed to the ceiling with dash fastener 12.5 mm dia x 5Omm long with Gmm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.J. channels 45x15x0.9 |mm running at the spacing of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered |flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.l. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wal/|partition with the help of rawl plugs at 450 mm centre, with 25mm long ldry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm clc, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification |and als০ including the cost of making openings for ight fitings, grills, diffusers,cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part ) :2011 |(Board with BIS certification marks) DSR S। No.12.45.3/2023 |
| 9 | Proviidng & fixing Factory made UPVC glazed/wire mesh window/doors comprising of lead free UPVC Multi-chambered Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body Using R4 series with frame (115 mm & above)x (45 mm & above) & both glazed and fly screen sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi- point locking system. (Height above 1.8m) (dsr-9.147.A4.3/2023) |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( DSR 13.80/2023) (156.05*0.735*111/107*100=118.91 |
| 11 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm ( DSR 13.48.1/2023) (193.7*0.735*111/107*100=147.62) |
| 12 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).( DSR-21.18/2023) |
| 13 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as perdirections of Engineer-in-Charge. (DSR-2023/17.1.1) |
| 14 | P/F white vitreous china water closet squatting pan white vitreous china pedestal type ( European type ) with seat and lid , 10 lit low level white P.V.C flushing cistern with manually controlled device ( hand lever ) confirming to IS: 7231, With all fittings and fixture complete including cutting and making good the walls and floors wherever required WC Pan ISI marked Black Plastic Lid & Seat as per DSR 2023 / SI NO 17.2.2 |
| 15 | P/F white vitreous china wash basin( 630 x 450 ) with C.I brackets, , 32 mm cp brass waste of standered pattern including painting of fitting and brackets,cutting and making good the walls and floors wherever required as per DSR 2023 / SI NO 17.7.1 |
| 16 | Providing & fixingP.VC watse pipe flexible for sink & wash basin including PVC waste fittings completas per DSR 2023 / SI NO 17.28.2.1 |
| 17 | P/F C.P.V.C pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipes with clampat 1.0 meter spacing . This includes jointing of pipes and pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of Engineer encharge . (15 mm as per DSR 2023 / SI 18.7.1) |
| 18 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture DSR 2023/13.48.3 |
| 19 | Providing & fixing 20 mm thick kota stone slab flooring over 20 mm thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab includding rubbing and polishing complete with base of cement & coarse sand mortar 1:4 ( as per DSR 2023 / 11.26.1 ) |
| 20 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) (DSR-2023/26.87.1) |
| 21 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge (DSR-2023/17.80 |
| 22 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 1500x450 mm (DSR-2023/17.32.4) Please Enable Macros to View BoQ information |
