|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.2 Of area beyond 3 sq. metres.(SI NO. DSR 15.12.2) |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.(SI NO. DSR 15.56) |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 In cement mortar (SI NO. DSR 15.7.4) |
| 4 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.(SI NO. DSR 15.18) |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.2 For thickness of tiles above 25 mm and up to 40 mm .(SI NO. DSR 15.23.2) |
| 6 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)(SI NO. DSR 4.1.8) |
| 7 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) 6.26.1 From ground level upto plinth level. (SI NO. DSR 6.26.1) |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) 9.1.1 Second class teak wood. (SI NO. DSR 9.1.1) |
| 9 | 12 mm thick plaster with plaster over b/w minimum thickness not to be 10mm to 12 mm thick in 1:4 cement and fine sand 1.25 FM. mortar including supply of all aterials,labour and T&P etc. required for the proper completion of the work. 13.4.1 1:4 (1 cement : 4 coarse sand) (SI NO. DSR 13.4.1) |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources. (SI NO. DSR 4.1.3) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources) (SI NO. DSR 5.1.3) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.1 Mild steel and Medium Tensile steel bars. (SI NO. DSR 5.22.1) |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm. (SI NO. DSR 11.41.2) |
| 14 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 8.2.2.2 Area of slab over 0.50 sqm. (SI NO. DSR 8.2.2.2) |
| 15 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (SI NO. DSR 11.37A) |
| 16 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of .........diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, pecification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board. (SI NO. DSR 12.45.3) |
| 17 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (SI NO. DSR 13.26) |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied 2.20 kg/10 sqm) (SI NO. DSR 13.46.1) |
| 19 | Apply priming coat over new steel and other metal surface after and including preparing the surface throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes ,fine steel /wood scrappers sand papering and knotting including cost of all materials, labour abd T&P etc required for proper completion of the work. Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood. (SI NO. DSR 13.50.2) |
| 20 | Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. (SI NO. DSR 13.58) |
| 21 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.1 In mud mortar. (SI NO. DSR 15.7.1) |
| 22 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. W.C.pan with cistern superior quality(SI No. DSR 17.1.1) |
| 23 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. Uropion seat with cistern superior quality(SI NO. DSR 17.3.1) |
| 24 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. wash basin with standerd superior quality size 630x450mm(SI NO. DSR 17.25.1) |
| 25 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (SI NO. DSR 17.32.2) |
| 26 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. brass bib cock 15mm dia(SI NO. DSR 18.15.1) |
| 27 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. Providing and fixing cpvc pipe 25mm bore(SI NO. DSR 18.7.3) |
| 28 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(SI NO. DSR 12.41.2) |
| 29 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .(SI NO. DSR 18.48) |
| 30 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. C.P.bib cock 15mm dia complete(SI NO. DSR 18.49.1) |
| 31 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. C.P.stop cock 15mm dia complete(SI NO. DSR 18.52.1) |
| 32 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. C.P. Towel rail. (SI NO. DSR 7506) |
| 33 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. waste pipe1 1/4\\". (SI NO. DSR 17.28.2.1) |
| 34 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. waste copling1 1/4\\". (SI NO. DSR 7492) |
| 35 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. ball cock. (SI NO. DSR 18.62.2) |
| 36 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. Shawer. (SI NO. DSR18.22.2) |
| 37 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. Towel ring. (SI NO. DSR 7504) |
| 38 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. Angle valve. (SI NO. DSR 18.53.1) |
| 39 | Supply &fixing of water supply &saintary fittings in room no.1,2,3,4 & dyning hall and anexy building. Shop tray. (SI NO. DSR 18.65) Please Enable Macros to View BoQ information |
