|
| 1 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand As per DSR 13.4.2 |
| 2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR 13.80 |
| 3 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger A N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of aII matarial (inside walls) As per DSR 13.14.1 |
| 4 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied P 0.90 litre/lOs m As per DSR 13.46.1 |
| 5 | Providing and Laying vitrified floor tiles in difference size (thickness specified by manufacturer) with water absorption less than 0.8% and confirming to IS 15622 of approved make in all colors and shade laid on 20mm thick cement mortar 1:4 (Icement 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete size of tiles 600x600mm. As per DSR 11.41.2 |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. As per DSR 8.31 |
| 7 | Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles rails shall be of size 75mm x30mm having wall thickness 5mm. The styles, top & bottom rails shal have one side wall thickness of 15mm integrail extruded on the hinge side of the profile for better screw holding power. the styles and rails shall be reinforced with M.S. tubes of size 33mmx17mmx1mm painted with primer all four corners of reinforcement to be welded or sealed solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel, the styles and rails will be mtred cut and joint with the help of PVC solvent cement & self driven self tapping scews single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15mm integrally extruded in the middle of the lock rail & self driven self tapping screws of size 100mm X8mm complete as per manufacturers specifications and direction of Enginer-in-charge Non decorative finesh (Toilet doors) As per DSR 14.18 |
| 8 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5mm made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of ISO mm long brackets of 15x15 mm M.S. square tube the vertical door frame profiles to bereinforced with 19x19 mm M.S. square tube of19gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall usiog M.S. screws gf 65/100 mm size, complete as per manufacturers specification and direction of Engineerin- Charge. As per DSR 9.119 |
| 9 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required As per Same as above but for European type W.C. pan with white plastic seat and lid.Make- Cera,Hindware. DSR 17.2.1 |
| 10 | Providing and fixing wall hung Cat No. :S1043148 wall hung EWC with soft close seat cover 510x365x380mm MR |
| 11 | Providing & fixing toilet paper holder As per DSR 17.34.1 |
| 12 | Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge. 15mm nominal bore AS per DSR 17.16.A |
| 13 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass single hole basin mixer of approved quality and make including painting of fittings and brackets, cutting and making good the walls wherever required. a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap. As per DSR 17.7A |
| 14 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. As per DSR 17.22A |
| 15 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. As per DSR 17.72 |
| 16 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. As per DSR 18.65 |
| 17 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (including angle valve for WC flushing cistern, jet & kitchen sink) 15mm nominal bore As per DSR 18.53.1 |
| 18 | Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore As per DSR 18.21.2.1 |
| 19 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per DSR 17.31 |
| 20 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore As per DSR 17.31 |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes Concealed work, including cutting chases and making good the walls etc. For internal Toilet |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes Concealed work, including cutting chases and making good the walls etc. For internal Toilet |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes As per DSR 18.7.2 |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes As per DSR 18.7.2 |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes As per DSR 18.7.2 |
| 26 | Providing and fixing brass stop cock of approved quality : For Internal Toilet 15 mm nominal bore As per DSR 18.16.1 |
| 27 | Providing and fixing gun metal gate valve with wheel of approved quality. For Vertical pipe connection with terrace rignmain 25 mm nominal bore As per DSR 18.17.1A |
| 28 | Providing and fixing gun metal gate valve with wheel of approved quality. For Vertical pipe connection with terrace rignmain 25 mm nominal bore As per DSR 18.17.1 |
| 29 | Providing and fixing gun metal gate valve with wheel of approved quality. For Vertical pipe connection with terrace rignmain 32 mm nominal bore As per DSR 18.17.2 |
| 30 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110mm Dia (for rain water) As per DSR 12.41.2 |
| 31 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single Push Fit Coupler 110mm Dia As per DSR 12.42.2.2 |
| 32 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single Tree with door110mm Dia As per DSR 12.42.3.2 |
| 33 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Plain bend 87.5 deg 110mm Dia As per DSR 12.42.5.2 |
| 34 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110mm Dia (for rain water) As per DSR 12.43.2 |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. a) 110mm Dia (for rain water) As per DSR 18.48 |
| 36 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. a) 110mm Dia (for rain water) As per DSR 12.22 |
| 37 | Providing fixing, jointing and testing uPVC low noise SWR having noise insulation less than 10db at 2Ips flow rate pipe to wall, celling and floor, approved quality, complete, for soil waste & rain water drain including pushfit jointing with seal ring, (i) Single socketed pipes internal Toilet (Soil & Waste Pipe) 75mm As per NSR |
| 38 | Providing fixing, jointing and testing uPVC low noise SWR having noise insulation less than 10db at 2Ips flow rate pipe to wall, celling and floor, approved quality, complete, for soil waste & rain water drain including pushfit jointing with seal ring, (i) Single socketed pipes internal Toilet (Soil & Waste Pipe) 110mm As per NSR |
| 39 | Providing fixing, jointing and testing uPVC low noise SWR having noise insulation less than 10db at 2Ips flow rate pipe to wall, celling and floor, approved quality, complete, for soil waste & rain water drain including pushfit jointing with seal ring, (i) Single socketed pipes Exposed on Wall (Soil & waste pipe) 75mm (for vent) As per NSR |
| 40 | Providing fixing, jointing and testing uPVC low noise SWR having noise insulation less than 10db at 2Ips flow rate pipe to wall, celling and floor, approved quality, complete, for soil waste & rain water drain including pushfit jointing with seal ring, (i) Single socketed pipes Exposed on Wall (Soil & waste pipe) 110mm As per NSR |
| 41 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion. Wend without door (87.5'') 110mm bend As per NSR |
| 42 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion.Wend without door (87.5'') 75mm bend As per NSR |
| 43 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion. Bend without door (45'') 110mm bend As per NSR |
| 44 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion.Bend without door (45'') 75mm bend As per NSR |
| 45 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion. Y' Fitting without door 110mm bend As per NSR |
| 46 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion.Y' Fitting without door 75mm bend As per NSR |
| 47 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion. Reduced 'Y' Fitting without door 100mm x 75mm |
| 48 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion. Single Tee with door 110mm bend |
| 49 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion. Reduced Tee with door 100mm x 75mm |
| 50 | Providing and fixing jointing and testing unplasticzed PVC pipes 10kg/cm2 confirming to IS : 4985 to wall, celling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. For Wash basin & Urinal 32mm dia pipe |
| 51 | Providing and fixing jointing and testing unplasticzed PVC pipes 10kg/cm2 confirming to IS : 4985 to wall, celling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. Elbow (90\\") 32mm dia pipe |
| 52 | Providing and fixing jointing and testing unplasticzed PVC pipes 10kg/cm2 confirming to IS : 4985 to wall, celling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. Elbow (90\\") 32mm dia pipe |
| 53 | Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony) As per DSR 18.58.2.1 |
| 54 | Providing and fixing square mouth UPVC S.W.R. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 2.70 Kg as per standard design. a) 150 x 110 mm. size P type With co,,on burnt clay F.P.S. (non modular) bricks of class designation 7.5 As per DSR 19.4.2.1 |
| 55 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm dia meter As per DSR 19.1.2 |
| 56 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m All kind of soil Pipes, cables etc exceeding 80mm dia But not exceeding 300mm dia As per DSR 2.10.1.2 |
| 57 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100mm dia SW pipe As per DSR 19.2.1 Please Enable Macros to View BoQ information |
