|
| 1 | Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift fix wheel type sliding gate/inter changeable Stop log gates consisting of skin plate, stiffeners, horizontal girders, pulley, pulley supports, bracings, lifting lug, bracket, rubber seals, clamps plates etc., with all accessories as per relevant for Canal, sluice Vertical gates and spillway gates including cost of all materials, machinery, labour, cutting, bending, aligning, anchoring, welding, seal fixing, tools and tackles etc., finishing, cleaning, applying two coat of zinc rich epoxy primer to give dry film thickness of 70 5 microns and finish coat(two coats)of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., complete as per specifications and approved drawings complete, including packing & forwarding, transportation charges for structural steel components and other materials. |
| 2 | Design, Drawing, fabrication, supply, erection and commissioning of Trestle assy/ Railing decking/Trash rack/Structural steel hoist bridge/ structural steel hoist supporting structure for monorail / Catwalk bridge for connecting spillway piers for all type of sluice with embedded parts consisting of columns, beams, bracings, stiffeners, ties, chequered plate covering, hand railing, ladder etc., with all other accessories for operating gates, other structure including cost of all materials, machinery, labour, tools and tackles, cutting, aligning, anchoring, welding, finishing, cleaning, applying two coats of zinc chromate red oxide primer and three coats of approved synthetic enamel paint etc., complete as per specifications and approved drawings, including packing & forwarding, transportation charges for structural steel components and other materials. |
| 3 | Design, Drawing, fabrication, supply, erection, testing and commissioning of Adequate capacity manually operated rope drum hoist according to relevant IS code, consisting of hoist platform bridge, rope drums, connecting shaft, gear system unit, pulleys, wire rope, Gate position indicator, manual operation system, etc. complete, with all accessories for operating gates including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, greasing, oil filling, tools and tackles, applying two coats of zinc chromate red oxide primer and three coats of approved synthetic enamel paint etc., complete as per specifications and approved drawings, including packing & forwarding, transportation charges for all materials. |
| 4 | Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm |
| 5 | Cleaning gates/ hoists/ embedded parts for re- painting by removing rust, oil, paint, grease etc., by using wire brush, scrubber, rust remover and applying a coat of rust inhibitive compound etc., complete. |
| 6 | Brick masonry (using well burnt clay bricks of size 230 x 110 x 70 mm, class designation 75 as per specification) up to plinth including all leads of all construction materials including curing etc. complete. In cement sand mortar 1:3 |
| 7 | Plaster in cement sand mortar 1:3 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: 12mm |
| 8 | Supply of water seal musical hollow knot type for canal gate having size 125x12x45 mm as per IS 11855 specification. |
| 9 | Supply of water seal Flat type for canal gate having size 100x12 mm as per IS 11855 specification. |
| 10 | Supply of cast steel roller for canal gate of grade 200-400N as per IS 1030 specification, having size 375 mm Dia and 100 mm Thick including brass bush and 2 nos brass spacer of 10mm thick and single piece stainless steel monolithic pin complete set as per drawing and specification. |
| 11 | Cutting and burning cactus and thorny bushes and sarkanda. |
| 12 | Uprooting Juli Flora /sarkandaUprooting Juli Flora /sarkanda, pahari kikar or arrows upto 0.50m. depth below ground level. |
| 13 | Empty Cement (Polythene) Bags |
| 14 | Labour charges for making Coffer Dam/ Ring Bundhs with earth filled EC bags including stitching along with transportation and placement at required locations in water including all leads and lifts complete excluding the cost of EC bag but including the cost of sutli. |
| 15 | De-watering by pumping water to maintain desired level including cost of POL/ power consumption etc. complete.10 to 19 HP |
| 16 | Silt Clearance/ Removal of blown sand/ Berm Unloading undressed with combined lead upto 50 m. for lined canal section.For FSD more than 2 m. |
| 17 | Extra for slush or daldal;that which will support man s weight. |
| 18 | Earth work excavation in ordinary soil for main canal and branches having discharge 10 cumecs and above;Kassi work undressed. |
| 19 | Carriage of Bats Ballast, Kankar, Sand, Bajri, Stone, Grit, Murram, Soling Stones For Road, Water, Good Earth.3 KM |
| 20 | Light Vehicles i.e. Jeeps and Cars etc.Hire charges |
| 21 | Supply of H.S.D. |
| 22 | Supply of fiberglass reinforced plastic (FRP) Gauge plate for accurate measurement of water level, moulded and sandwiched with MS strip both side finish, front side engraved and moulded computerized marking of bands and figures covered in radium, eye pleasent colour combination, laminated with high abrasion grade polyurethene, provision of MS pressed channel for gauge plate more than60 cm width etc..15 cm wide |
| 23 | Labour charges for extracting of floating weeds (Jal Kumbhi and others) throwing it on the outer slopes of the banks of the canals. |
| 24 | Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 26 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 27 | Extra over item no. 16 for every 10 m. additional lead beyond 50 m. in ordinary soil.From 50 m. To 150 m. Please Enable Macros to View BoQ information |
