Tender For Supply Of Loose Dus And Part Processing (Ldpp) Contract (Period 2026-2028), Ranipet-Tamil Nadu

TDR : 54783749

Tender Notice
BOQ

1 Days Left

Ranipet , Tamil Nadu

Tender Brief : Tender For Supply Of Loose Dus And Part Processing (Ldpp) Contract (Period 2026-2028)

Document Fees
Refer document

EMD
₹ 200000.0 /-

Tender Value
Refer document

Submission Date
07-04-2026

Competition Type
Indian

Bidding Type
Works

Need a Business Loan? Apply Now !


1	Category:-CP - RS Group :CP001 ( TO QUOTE FOR ALL RS IN THIS GROUP)
2	Hard Chrome Plating of AP Fan Pistons Both way delivery in BHEL Scope Drg.No:- 0-55-214-00387 or equivalent
3	Category:-CP - RS Group :CP002 ( TO QUOTE FOR ALL RS IN THIS GROUP)
4	A) Machining pre-grinding chrome plating and post grinding of Piston assy of 16S (0-55-216-00461). or equivalent Fabricated piston after MPI will be supplied by BHEL. Both way transport is in BHEL scope Chrome plating to be done at BHEL approved sources. The rate is inclusive of chrome plating and freight for chrome plating. with factor 1.00 (FP07)B) Machining pre-grinding chrome plating and post grinding of Piston assy of 11S and 12S (0-55-214-00387 and 1-55-335-00893) or equivalent .Fabricated piston after MPI will be supplied by BHEL. Both way transport is in BHEL scope. Chrome plating to be done at BHEL approved vendor with factor 0.64 (FP05)
5	Category:-FMSP - RS Group :FMSP01 ( TO QUOTE FOR ALL RS IN THIS GROUP)
6	A) Machining of BEARING HOUSING ID UPTO DIA 300MM Drg.No:- 0-55-214-00598 or equivalent with factor 1.00 (D80A)B) M/cing of Bearing Housing ID above 300mm to 400mm Drg: 0/0613/ or equivalent with factor 1.00 (D80C)
7	A) Machining of SPLIT TYPE BEARING HOUSING ID DIA > 250 MM UPTO 400 MM with factor 1.00 (D81B)B) Machining of SPLIT TYPE BEARING HOUSING ID DIA UPTO 250 MM; drg 0-55-126-00186/04/00 or equivalent with factor 0.77 (D81A)
8	Complete machining of Bearing Housing as per drg 0-55-335-00807 0-55-214-00869 0-55-334-00857 1-55-216-00473 0-55-215-00968 0-55-334-00942 0-55-335-01067 or equivalent) including drilling and tapping.SR completed castings to be collected from shop.
9	A) Machining of FLANGE BEARING HOUSING ID DIA > 200 MM UPTO 275 MM with factor 1.00 (D83B)B) Machining of FLANGE BEARING HOUSING ID DIA UPTO 200 MM to Drg. 1-55-124-00038/09/00; OR Equivalent. with factor 0.68 (D83A)
10	Complete machining of bearing housing drg no 0-55-335-01269 or equivalent including all VTL operations, milling, drilling and tapping. Bearinghousing castings to be collected from shop after heat treatment.
11	Category:-FMSP - RS Group :FMSP02 ( TO QUOTE FOR ALL RS IN THIS GROUP)
12	Machining of WORM GEAR ASSEMBLY for Drg.No:- 2-52-326-00476 or Equivalent drg /Process
13	A) Fabrication and Machining of CLEANING EQUIPMENT to drg.2-52-329-01656 01700 01744 1865 or Equivalent drg /Process with factor 1.00 (AC06)B) Fabrication and Machining of CLEANING DEVICE to drg.0-52-329-01027 0-52-329-01176 0-52-329-01300 0-53-316-00165 or Equivalent drg /Process with factor 0.88 (AC01)
14	Category:-FMSP - RS Group :FMSP03 ( TO QUOTE FOR ALL RS IN THIS GROUP)
15	A) Fabrication and Machining of INLET CONE ASSEMBLY (FAB + M/C ABOVE 500 MM) DRg.;2-56-124-02835 OR Equivalent with factor 1.00 (D66B)B) Fabrication and Machining of INLET CONE ASSEMBLY (FAB + M/C UPTO 500 MM) to Drag 2-56-171-02514 OR Equivalent with factor 0.15 (D66A)
16	Category:-FMSP - RS Group :FMSP04 ( TO QUOTE FOR ALL RS IN THIS GROUP)
17	A) Machining of Impeller Cover as per drawing (2-55-214-00817 2-55-334-00978or equivalent ). Fabricated Material to be collected from shop with factor 1.00 (IC01)B) HUB MACHINING TO DRG 2-0A-106-00900; 2-0A-107-02400; 3-56-173-05419 or equivalent with factor 1.71 (IG08)C) Machining of Impeller Cover as per drawing (2-55-334-01035 or equivalent ). Fabricated Material to be collected from shop with factor 0.77 (IC02)
18	Category:-FMSP - RS Group :FMSP05 ( TO QUOTE FOR ALL RS IN THIS GROUP)
19	Complete machining of Bearing Housing as per drg (0-55-335-01067 or equivalent ) including drilling and tapping SR completed castings to be collected from shop
20	Category:-HF - RS Group :HF001 ( TO QUOTE FOR ALL RS IN THIS GROUP)
21	Damper Frame Fabrication( HLB Design) Drg No- 0-57-583-03310 or equivalent (Manufacturing as per drawing)
22	A) Gate Frame Fabrication (Above 4MT up to 6MT) or equivalent Drg /Process with factor 1.00 (GF18)B) Fabrication of Gate Frame Fabrication (above 2 MT up to 3 MT) or Equivalent Drg /Process with factor 1.00 (GF12)C) Fabrication of Gate Frame Fabrication (up to 2 MT) Drg.No:- 1-57-460-00039 1-57-460-00047 or Equivalent Drg /Process with factor 1.00 (GF11)D) Gate Frame Fabrication (Above 3MT up to 4MT) or Equivalent Drg /Process with factor 1.00 (GF13)
23	GATE FRAME (HLB DESIGN) (Manufacturing as per Drawing) 1-57-560-04406/02, 2-57-560-24113/04, 0-57-560-03103/03, 2-57-560-24110/01 OR EQUIVALENT
24	Fabrication of Louvre/Biplane Damper framefabrication including Gland Plate and Follower Plate fabrication ( Studs supplied by BHEL)
25	Category:-HF - RS Group :HF002 ( TO QUOTE FOR ALL RS IN THIS GROUP)
26	A) Fabrication of GRATING ASSEMBLY-CORTEN A(E8018 ELECTRODE) Drg.No:- 1-52-010-00490 or Equivalent drg /Process with factor 1.00 (AF06)B) Fabrication of GRATING (PRESSING) Drg.No:- 2-52-042-03394 or Equivalent drg /Process with factor 0.91 (AF07)C) Fabrication of BEARING PEDESTAL BASE FRAME Drg.No:-0-56-226-00364 1-56-228-02844 or equivalent with factor 0.89 (F67B)D) Fabrication of GRATING ASSEMBLY-For MODULES(with FLAT). Where the plates are to be converted into standard or non-standard Flats (where the conversion charges are not payable extra) Drg.No:- 2-52-010-00214 or Equivalent drg /Process with factor 0.80 (AF08)E) Fabrication of BRACKET FOR GATES Drg.No:- 3-57-999-08161 or Equivalent with factor 0.73 (GF01)F) Fabrication of GRATING ASSEMBLY-For MODULES(with FLAT).Where the flats of standard sizes will be issued (where conversion of Plates to Flats are not involved) Drg.No:-1-52-010-01405 or Equivalent drg /Process with factor 0.62 (AF09)
27	FABRICATION OF BEARING SUPPORT SUB ASSY 1-52-042-02717 OR EQUIVALENT
28	FABRICATION OF SECTOR PLATE ASSY INCLUDING DRILLING TAPPING MACHINING SMALL COMPONENTS. IF NECESSARY HEAT CORRECTION (EXCLUDING HEAT TREATMENT BOTTOM PLATE MACHINING) Drg.No:- 0-52-041-00681 0-52-041-00685, 0-52-042-01796, 0-52-041-01790 or Equivalent drg /Process
29	Category:-HF - RS Group :HF003 ( TO QUOTE FOR ALL RS IN THIS GROUP)
30	Fabrication & Trial Assy of Diffuser PA including integration 0-55-835-02012 or equivalent
31	Fabrication & Trial Assy of Diffuser FD including integration 0-55-215-01686 or equivalent
32	Fabrication & Trial Assy of Diffuser ID including integration 0-55-827-02024 or equivalent
33	Category:-HF - RS Group :HF004 ( TO QUOTE FOR ALL RS IN THIS GROUP)
34	A) Fabrication Of Shaft Protecting Tube To Drg. 0-55-228-01089 or Equivalent Drg /Process with factor 1.00 (AP26)B) Fabrication of Shaft Protecting Tube to Drg. 1-55-214-00619/02/00;1-55-216-00353/02/00;1-55-334-00695/04/00;1-55-335-00867/00/00;2-55-213-00698/00/00;3-55-124-00063/04/00 or Equivalent Drg /Process with factor 0.58 (AP22)
35	CC PL Fabn. (WSTE Matl) Reference weight will be 250 Kgs. Factor will be applied as follows Rating factor= CC pl wt being loaded/250 . For naxtra material Rating factor = 2*CC pl wt being loaded/250. Prepared material will be issued from shop.
36	Fabrication & Trial Assy of Suction Chamber PA 0-55-735-02010 OR EQUIVALENT
37	Fabrication & Trial Assy of Suction Chamber FD 0-55-716-02006 OR EQUIVALENT
38	Fabrication & Trial Assy of Suction Chamber ID 0-55-727-02027 OR EQUIVALENT
39	Category:-HM - RS Group :HM001 ( TO QUOTE FOR ALL RS IN THIS GROUP)
40	A) Machining of BEARING HOUSING COVER ID DIA ABOVE 310 MM with factor 1.00 (D82B)B) Machining of BEARING LID ID UPTO 215 MM for Drg.No:- 20-A-106-011 with factor 0.38 (D85A)C) Machining of BEARING HOUSING COVER ID DIA UPTO 310 MM 3-56-171-01214 OR Equivalent with factor 0.35 (D82A)
41	Complete machining of Bearing Covers as per drg (1-55-214-00414 2-55-214-00813 2-55-334-00814 or equivalent ) including drilling tapping and slotting etc.. Casting/Prepared material to be collected from shop.
42	A) Complete machining of Bearing Covers as per drg (1-55-335-01417) or equivalent including drilling tapping and slotting etc. Casting/Prepared material to be collected from shop. with factor 1.00 (D82R)B) Complete machining of Bearing Covers as per drg (2-55-216-00315 2-55-216-00317 1-55-215-01143or equivalent ) including drilling tapping and slotting etc.. Casting/Prepared material to be collected from shop. with factor 0.73 (D82Q)
43	A) Machining of BEARING CASE ID more than 240 MM with factor 1.00 (D84B)B) Machining of INNER BEARING BUSH Rough Machining to Drg. 3-55-125-00284/02/00; 3-0A-007-03600 OR Equivalent. with factor 1.10 (D85D)C) Machining of BEARING CASE ID UPTO 240 MM to Drg. 2-55-124-00045/04/00; OR Equivalent. with factor 0.68 (D84A)
44	Fabrication and machining of Hub with Flange '3-56/4131 or Equivalent. SR facility will be extended by BHEL. Prepared material will be issued from shop
45	HUB machining as per drawing 56-3/03992, 56-3/02138 or Equivalent. Prepared material will be issued from shop
46	Machining of BRG COVER ASSY from P355NH-Plate 8 x D280 Plate 75x D390 to Drg.No. 15533400976(58 Kg/No.) or equivalent. Prepared material will be issued from shop.
47	Machining of DRIVE DISC from Plate 50 x D610 to Drg.No. 15533500490(68.5. Kg/No.) or equivalent. Prepared material will be issued from shop.
48	Category:-HM - RS Group :HM002 ( TO QUOTE FOR ALL RS IN THIS GROUP)
49	A) Machining of 12 SIZE CYLINDER ASSY Drg.No:- 2-55-335-00746 or equivalent with factor 1.00 (FM02)B) Machining of 16 SIZE CYLINDER ASSY Drg.No:- 1-55-216-00439 or equivalent with factor 1.65 (FM03)C) Machining of 11 SIZE CYLINDER ASSY Drg.No:- 1-55-214-00423 or equivalent with factor 0.90 (FM01)
50	Category:-HMSP - RS Group :HMSP01 ( TO QUOTE FOR ALL RS IN THIS GROUP)
51	FABRICATION AND MACHINING OF ALCS SUPPORT BRACKET as per DRG. 15204102615 OR EQUIVALENT
52	Machining of Sector Plate Assy to various drg. (T and B recovery applicable at the rate of 15.71 Kg/Sq. Mtr)-Rate payable per Sq. Mtr of Machining.
53	Category:-HMSP - RS Group :HMSP02 ( TO QUOTE FOR ALL RS IN THIS GROUP)
54	Rotor Drive Base -Machining Only To Drg-No. 1-52-100-00978 1-52-100-02220 1-52-100-02320, 2/00055 1/00074 2/02510 1/01522 Or Equivalent (Fabricated Base Supplied By Bhel)
55	Electrical/air Motor Bracket -Machining to drawing no. 2/3210, 2/03038 or equivalent (AR25)drg no. 2/2996, 2/3009 or equivalent - factor – 1 (AR26)drg no. 2/3036 or equivalent - factor – 0.75 (AR27)drg no. 2/2433, 3/1837 or equivalent - factor – 0.32 (AR24)
56	Fabrication and Machining of EXPANSION ARRT OF ALL SIZES Drg.No:- 6-17-10069 6-17-10070 1-52-030-00002 1-52-030-00004 or equivalent
57	Machining of fabricated BRG PEDESTAL 25611701314 OR EQUIVALENT
58	Category:-HMSP - RS Group :HMSP03 ( TO QUOTE FOR ALL RS IN THIS GROUP)
59	Machining of stationary spool support ring to drawing no. 1/1102, 2/2399 or equivalent
60	Machining of stationary spool assy to drawing no. 1-52-011-00700, 0-52-011-01654 or equivalent (AM48)SPOOL SEAL ASSY M/cing Drg:1-52-047-00295,1/01157/00521 or equivalent with factor 1.1 (AM52)
61	GB Spool machining to drawing no. 1/2436 or equivalent (AM54)For drawing no. 1/1131 or equivalent - factor - 0.65 (AM44)
62	Category:-HMSP - RS Group :HMSP04 ( TO QUOTE FOR ALL RS IN THIS GROUP)
63	MACHINING OF BEARING SUPPORT SUB ASSY as per drg 1-52-042-02717 OR EQUIVALENT
64	Category:-HB - RS Group :HB001 ( TO QUOTE FOR ALL RS IN THIS GROUP)
65	A) Horizontal Boring in Support Body-12 size (Rough Machining) Drg.No:- 1-55-214-00890 or equivalent with factor 1.00 (HB02)B) Horizontal Boring in Support Body-11 size (Rough Machining) Drg.No:- 1-55-214-00204 or equivalent with factor 0.90 (HB01)
66	IMPELLER HUB HORIZONTAL BORING (ROUGH LINE BORING) AS PER SCOPE SHEET FOR THE DRG 0-55-216-01745, 0-55-216-02062, 0-55-335-2040 AND 0-55-335-1953 OR EQUIVALENT. VTL/TURNING COMPLETED IMPELLER HUB WILL BE ISSUED FROM SHOP.
67	IMPELLER SHELL TREPPANING AS PER SCOPE SHEET FOR THE DRG NO 4-55-216-03335, 4-55-335-03649 OR EQUIVALENT. ITEM 01- IMPELLER SHELL PLATE [TH (12MM TO 18MM) X WIDTH (360MM TO 500MM) X LENGTH (3600MM TO 4500MM)] AND ITEM-02 IMPELLER SHELL FLANGE (OD/ID) WILL BE ISSUED FROM SHOP IN ROLLED AND FABRICATED CONDITION . (SPIDER FOR SUPPORTING PURPOSE WILL BE ISSUED FROM SHOP ON RETURNABLE BASIS)
68	16S Support Body Line Boring 1-55-216-00645 AS PER SCOPE SHEET
69	Category:-LF - RS Group :LF0001 ( TO QUOTE FOR ALL RS IN THIS GROUP)
70	Fabrication of Guide Bearing Housing / static/stationary spool except Drilling Tapping Machining with Red Oxide painting and wherever Heat Treatment is required Red Oxide Paint need not to be done. MPI Charges payable extra as per OS(Main)ARC Drg.No:- 0-52-011-00561 0-52-261-00466 1-52-011-00700 or equivalent
71	Fabrication of Bearing Support Sub Assy/ Reducer Base/ Rotor Drive Base/ Base frame with Red Oxide Paint Except Drilling Tapping AND Heat Treatment (Machining Painting Not required wherever Heat Treatment is called for) Drg.No:- 1-52-042-00646 1-52-100-00074 or equivalent
72	A) Fabrication and Machining of CIRCULAR EXPANSION JOINTS FOR DIA above 2000MM to 4000MM Drg.No:- 2-55-335-01447 or equivalent with factor 1.00 (D20D)B) Fabrication and Machining of CIRCULAR EXPANSION JOINTS FOR DIA above 1000MM to 2000MM or equivalent with factor 0.75 (D20C)C) Fabrication and Machining of CIRCULAR EXPANSION JOINTS FOR DIA UPTO 1000MM for Drg.No:- 2-56-171-02825 or equivalent with factor 0.57 (D20B)
73	A) Fabrication and Machining of SEALING FOR IMPELLERS -for above OD 2.5 Mtr TO 3.5 Mtr (Angle rolling will be done by BHEL) with factor 1.00 (D21C)B) Fabrication of SEALING FOR IMPELLERS -for above OD 1.5 Mtr TO 2.5 Mtr (Angle rolling will be done by BHEL) Drg.No:- 2-56-228-02417 or equivalent with factor 0.58 (D21B)C) Fabrication of SEALING FOR IMPELLERS for OD 1 Mtr TO 1.5 Mtr. (Angle rolling will be done by BHEL) Drg.No:- 2-56-228-02417 or equivalent with factor 0.41 (D21A)D) fabrication and Machining of REGULATING RING FOR IGV ASSYS DIA UPTO 1600MM Drg.No:- 2-55-112-00468 with factor 0.27 (IG15)
74	Fabrication of Sealing For Impellers -For OD Up to 1 Mtr (Angle rolling will be done by BHEL) as per Drg 2-56-226-03249 2-56-226-04824 2-56-214-04065 or equivalent
75	Fabrication and Machining of T-BARS (from I-section) Rotor Angle Bye pass Seal Angle Drg.No:- 1-52-041-00282 2-52-010-00546 or equivalent
76	Category:-LF - RS Group :LF0002 ( TO QUOTE FOR ALL RS IN THIS GROUP)
77	A) Fabrication of Seals Up to 2.5 mm Spot Welded Type (Plug Welding Is Permitted); Drg no: 3-53-013-00137; 4-54-013-00183 or equivalent with factor 1.00 (D23C)B) Fabrication of SEALS ABOVE 2.5 MM ORDINARY TYPE, AXIAL SPACER BAR ASSY, PIN SPACE GAUGE AND ALL SHIMS Drg.No:- 4-52-013-02430; 4-52-013-01894; 3-52-013-01128; 61720122; 61710032, 61720060 or equivalent with factor 0.88 (D23B)C) Fabrication of Seals Above 2.5 mm Spot Welded Type (Plug Welding Is Permitted) Drg no: 2-52-041-01161; or equivalent with factor 0.88 (D23D)D) Fabrication and Machining of CIRCUMFERENTIAL SEAL WITH SUPPORT (ANGLE SECTION ROLLING) for Drg.No:- 3-53-013-00527 or equivalent with factor 0.71 (D60)E) Fabrication of SEALS UPTO 2.5 MM ORDINARY TYPE Drg.No:- 4-52-013-00982; 61710041 or equivalent with factor 0.67 (D23A)
78	Fabrication and machining of HOOK Drg.No:- 6-17-20040; 6-17-20063; 4-79-008-00019; 61720118 or equivalent
79	A) COMPLETE FABRICATION OF LIFTING STAY EXTENSION(NEW) AS PER DRAWING 35201002520 OR EQUIVALENT with factor 1.00 (D89)B) Fabrication and Machining of Lifting Stay Extension To Drg 3-52-010-02120 ,3-52-010-00309 3-52-010-01460 Equivalent Drg Having Same Work Content with factor 0.43 (AM23)
80	A) Fabrication of Slot Cover; Machining of CLIP Drg.No:- 3-57-999-11913, 6-17-10045 or equivalent with factor 1.00 (GF14)B) Machining of CLIP Drg.No:-6-17-10045 or equivalent with factor 1.00 (AM30)C) Fabrication of Shims for APH items like sector plate, reducer base DRG NO.: 4-52-100-02027 or equivalent with factor 0.23 (D02Q)
81	Category:-LF - RS Group :LF0003 ( TO QUOTE FOR ALL RS IN THIS GROUP)
82	A) Complete Manufacturing Of Seal Guage As Per Bhel Drg 4-52-013-00718 4-52-013-01464 4-52-054-00662 4-52-054-01745 4-52-054-03555 With Bhel Material Or Equivalant Content With Factor 1.00 (AL01)B) Fabrication and Machining of PIPE CLAMPS above 2 inch and up to 3 inch Drg.No:- 6172-0231,2-55-335-01450, 2-56-999-02051 or equivalent with factor 0.80 (D05C)C) Fabrication of CLAMP TO 52 PGMA Drg.No:- 6-17-10066 6-17-20185 with factor 0.77 (AM06)D) Fabrication and Machining of PIPE CLAMPS UPTO 2 inch Drg.No:- 6-17-10016, 4-52-272-00250 or equlivalent with factor 0.51 (D05A)
83	Fabrication of BASKET PROTECTING SHEET Drg.No:- 2-52-010-01085 OR EQUIVALENT
84	CAF Gaskets To Varous Size / Shape Drg.No:- 4-78-044-00905, 3-Fw-223-10540 Or Equivalent
85	A) Fabrication and Machining of RECTANGULAR EXPANSION JOINTS (W X L MORETHAN 4 SQ.MT UP TO 8 SQ.MTR) with factor 1.00 (D20G)B) Fabrication and Machining of RECTANGULAR EXPANSION JOINTS (W X L MORETHAN 2 SQ.MTR UPTO 4 SQ.MTR) with factor 0.98 (D20F)C) Fabrication and Machining of RECTANGULAR EXPANSION JOINTS (W X L upto 2 SQ.MTR) for Drg.No:- 1-56-173-04114 or equivalent with factor 0.84 (D20E)
86	Fabrication and Machining of PINION COVER ASSY for Drg.No:- 1-52-100-03107 OR EQUIVALENT
87	Fabrication Of Caf Washer D 50 X D17 - 3.15 Mm Thick; 61710089 Or Equivalent
88	A) Manufacture of Fixing Pin of Length above 250 mm Drg.No:- 6-16-00130 or equivalent with factor 1.00 (FP02)B) Manufacture of Fixing Pin of Length up to and including 250 mm Drg.No:- 6-16-00130 or equivalent with factor 0.72 (FP01)
89	Fabrication and Machining of CHAIN GUARD Drg.No:- 2-57-010-00215 OR EQUIVALENT
90	Fabrication of Door Cover Assembly Drg.No:- 6-17-20096 OR EQUIVALENT
91	Category:-LF - RS Group :LF0004 ( TO QUOTE FOR ALL RS IN THIS GROUP)
92	Fabrication of COLD END BASKETS FULL SECTOR BASKETS Drg.No:- 2-52-010-00531 2-52-010-00532 2-52-010-00533 2-52-010-00534 or equivalent
93	Fabrication of HOT END HEATING ELEMENT BASKETS-MODIFIED DESIGN (representative Drg. 2-52-025-00140 or equivalent where Rev-04 is for earlier Design and rev-05 is for modified design)
94	Category:-LF - RS Group :LF0005 ( TO QUOTE FOR ALL RS IN THIS GROUP)
95	AC MOTOR BRACKET AND AIR MOTOR BRACKET FABRICATION TO DRG NO. 25210003987, 25210003068, 25210003036, 25210004116 OR EQUIVALENT
96	Fabrication of axial seal support bar cold end, hot end, diaphragm end plates cold end, hot end etc to drawing no. 4-52-010-04590 or equivalent drawings
97	FABRICATION OF GUIDE BEARING HOUSING COVER 25226101703 OR EQUIVALENT
98	FABRICATION OF GUIDE BEARING HOUSING COVER 25226102398 OR EQUIVALENT
99	FABRICATION OF MODULE COVER ASSY DRG. 3-52-010-03268, 3-52-010-02612 OR equivalent
100	FABRICATION OF ROTOR POST PROT. COVER DRG. 25201103688 OR EQUIVALENT
101	FABRICATION OF SUPPORT BEARING SHIPPING ARRGT 25226203754 OR EQUIVALENT
102	Transport stand for single stage AP rotor REF DRG NO. 1-55-216-02337 OR EQUIVALENT
103	Category:-LF - RS Group :LF0006 ( TO QUOTE FOR ALL RS IN THIS GROUP)
104	Fabrication and Machining of FRAME I AND III MADE OUT OF SHEET Drg.No:- 1-79-020-07344/05 or equivalent
105	COMPLETE FABRICATION OF MODIFIED FRAME II-(40 SHEETS) AS PER DRAWING 17902004231 OR EQUIVALENT.
106	Category:-LF - RS Group :LF0007 ( TO QUOTE FOR ALL RS IN THIS GROUP)
107	Manufacture of REINFORCEMENT TO DRG. 4-79-020-00341/01 OR EQUIVALENT Drg.No:- 6-17-20142
108	Category:-LF - RS Group :LF0008 ( TO QUOTE FOR ALL RS IN THIS GROUP)
109	Spring Seals Bonnet (Loose Seals, Biplane Blade seals) Drg no 2-57-460-11611 As per drawing or equivalent
110	Spring Seals Bottom (Welded Seals, Spring seal Sides) Drg no 2-57-460-11612 As per drawing or equivalent
111	Blade Seal (Louver) Drg no 3-57-433-20912 OR EQUIVALENT
112	Bulb Seal Assy (Common Seal, Loop Seal, Seal-1 ) Drg no 2-57-620-26684 or equivalent As per drawing
113	Jamb Seal Assy Drg no 3-57-203-21833 OR EQUIVALENT
114	Blade Seal Assy Drg no 2-57-583-26219 (HLB Design) SET OR EQUIVALENT
115	Category:-LFLM - RS Group :LFLM01 ( TO QUOTE FOR ALL RS IN THIS GROUP)
116	Machining of PIN RACK SPACE SETTING BLOCK Drg.No:- 6171-0013 or equivalent
117	A) Machining of GLAND PLATES AND FOLLOWER PLATES BORE DIA > 105 MM UPTO 115 MM OF GLAND PLATE Drg No.: 4-48-013-35943, 4-48-013-35945 or equivalent with factor 1.00 (GM69)B) Machining of GLAND PLATES AND FOLLOWER PLATES BORE DIA > 85 MM UPTO 105 MM OF GLAND PLATE Drg No.: 4-48-013-35173, 4-48-013-35175 or equivalent with factor 0.93 (GM68)C) Machining of GLAND PLATES AND FOLLOWER PLATES UPTO BORE DIA 85MM OF GLAND PLATE Drg.No:- 4-48-433-35686 4-48-433-35689 or equivalent with factor 0.86 (GM67)
118	A) Machining of BLADE BLOCKS (DAMPERS)to Drg no 3-57999-04636 or equivalent - (above ID 83 mm) with factor 1.00 (GM75)B) Machining of BLADE BLOCKS (DAMPERS) to Drg no 3-57999-04635 or equivalent - (upto ID 83 mm) with factor 0.80 (GM74) Prepared material will be issued from shop
119	A) GLAND PLATE WITH THREADED DESIGN DRG NO:3-57-999-21980, 3-57-999-21981, VAR-11 or equivalent with factor 1.00 (LF14)B) GLAND PLATE WITH THREADED DESIGN DRG NO:3-57-999-21980, 3-57-999-21981, VAR-10 or equivalent with factor 0.74 (LF13)
120	Category:-LFLM - RS Group :LFLM02 ( TO QUOTE FOR ALL RS IN THIS GROUP)
121	Fabrication and Machining of Guide Trunnion Sealing Sleeve Assy (For Fully Machining) To Drg. 2-52-261-02394 Or Equivalent
122	CHIMNEY FOUNDATION BOLT OF ALL SIZES WITH NUT AND WASHER for Drg.No:- 3-87-010-80422 or equivalent
123	A) LIGHT FABRICATION LIGHT M/CING (such as Turning, Milling, etc) ITEMS UNIT WT UP TO 2 KGS Sample drgs: 1-55-334-01493, 3-55-335-00960 , 4-52-261-03095, 4-52-010-02551,3-55-215-01735,4-52-010-02550 or equivalent with factor 1.00 (D02F)B) LIGHT FABRICATION LIGHT MACHINING (such as Turning, Milling, etc) OF ITEMS UNIT WT more than 2 Kg and UP TO 10 KGS Sample drgs: 3-55-628-02449; 2-55-228-01431; 3-52-100-00154 or equivalent with factor 0.85 (D02E)C) LIGHT FABRICATION LIGHT MACHINING (such as Turning, Milling, etc) ITEMS UNIT WT MORE THAN 10 KGS AND UPTO 50 KGS Sample drgs: 1-GH-010-00109, 61710038,2-55-335-02174,3-52-261-00727 or equivalent with factor 0.81 (D02K)D) LIGHT FABRICATION LIGHT MACHINING (such as Turning, Milling, etc) OF ITEMS UNIT WT 100 KGS to 250 Kgs Sample drgs: 4-55-021-02305; 3-56-000-03823,3-55-516-02475,1-52-220-02437 or equivalent with factor 0.81 (D02C)E) LIGHT FABRICATION LIGHT MACHINING (such as Turning, Milling, etc) UNIT WT MORE THAN 50 KGS AND UPTO 100 KGS Sample drgs: 4-55-635-03633, 3-56-113-02890, 3-55-580-02685, 3-55-530-02718 or equivalent with factor 0.77 (D02L)
124	Fabrication and Machining of TEMPLATES TO VARIOUS DRGS 4-79-980-01203 or equivalent
125	Fabrication and Machining of OBSERVATION PORT ASSY Drg.No:- 6-17-10071 OR EQUIVALENT
126	A) Fabrication and Machining of FDN BOLTS/ FDN STUD above M50 all variants ; All FDN GUIDE (WITHOUT PAINTING) Drg.No:- 3-79-080-01103; 3-55-021-01642; 3-55-021-01643; 3-55-228-01433 with factor 1.00 (DE2E)B) Machining of SCREW JACK, STUD FOR TEMP SENSOR DRG NO:35500000517; 35600001596; 3-55-335-02053 OR Equivalent with factor 0.84 (TK06)C) Fabrication and Machining of FDN BOLTS/ FDN STUD above M36 and up to M50 all variants (WITHOUT PAINTING) Drg.No:- 3-79-080-00879; 61720221; with factor 0.55 (DE2D)D) Fabrication and Machining of FDN BOLTS/ FDN STUD above M27 and up to M36 all variants (WITHOUT PAINTING) Drg.No:- 3-79-080-00877; 3-55-228-01436; with factor 0.51 (DE2C)E) Fabrication and Machining of FDN BOLTS/ FDN STUD above M20 and up to M27 all variants (WITHOUT PAINTING) Drg.No:- 3-79-080-00874; 3-56-000-04509; with factor 0.46 (DE2B)F) Fabrication and Machining of FDN BOLTS/ FDN STUD up to M20 all variants (WITHOUT PAINTING) Drg.No:- 3-56-000-04512; 3-56-000-04539; with factor 0.40 (DE2A)
127	A) Fabrication and Machining of LIFTING HOLDER HANGER ASSY WITH NUTS SUPPLIED BY BHEL) Drg.No:-3-79-021-01244 or equivalent with factor 1.00 (F64C)B) Fabrication of SUSPENSION ROD for Drg.No:- 3-79-021-00245 or equivalent with factor 0.64 (F64H)
128	DRIVE RACK ASSY AS PER DRG 2-57-580-24064 OR EQUIVALENT
129	A) Machining of ADJUSTING SCREW for Drg.No:- 3-79-013-00126 or equivalent with factor 1.00 (RS88)B) Machining of ADJ/CO LINK ABOVE M24 UPTO M36 Drg no : 3-57-223-08853 or equivalent with factor 0.82 (GM23)C) Fabrication and Machining of ADJ/CO LINK ABOVE M16 UPTO M24 Drg.No:- 3-57-113-01100 or equivalent with factor 0.67 (GM22)
130	A) Fabrication and Machining of PIN WHEEL - II Drg.No:- 6-172-0088 with factor 1.00 (RS96)B) Fabrication and Machining of PIN WHEEL - I Drg.No:- 6-172-0087 with factor 2.03 (RS95)C) Manufacture of FORM TOOL ASSY to drg.3-79-020-00271/01 OR Equivalent. with factor 1.11 (D22)D) Fabrication of NEW FORM TOOL from Plate 16 mm to drg. 3-79-020-02730 Or Equivalent with factor 0.87 (D22A)E) GRIP COUPLING Drg.No:- 6-17-20174 with factor 0.35 (RS97)F) Machining of BEARING/ PILLOW BLOCK ASSEMBLY Drg.No:- 6-17-20089, 2-52-329-00736 with factor 0.29 (RS84)G) Fabrication and Machining of ALIGNMENT JIG Drg.No:- 6-17-20091, 6-17-20136 with factor 0.25 (RS87)
131	Fabrication & Machining of Tool Kit 2-55-000-01776 / 2-55-000-01777 OR EQUIVALENT
132	Category:-LFLM - RS Group :LFLM03( TO QUOTE FOR ALL RS IN THIS GROUP)
133	COMPLETE MACHINING OF SLEEVE ASSY AS PER DRAWING 35204102530 OR EQUIVALENT.REQUIRED ROD SIZES WILL BE SUPPLIED FROM SHOP
134	A) SHAFT FINAL Machining (DIA 63 L 270) including KEY way; SETTING SHAFT PART-I INDICATION SHAFT-II Drg.No:- 3-56-115-02701, 3-55-335-01533 3-55-627-02498 with factor 1.00 (FD34)B) Machining of SHAFT - II/ EERM Shaft including Sleeve machining (of all lenghts) for Drg.No:- 3-77-017-01853 or Equivalent with factor 0.93 (RS91)C) Machining of SHAFT - I Drg.No:- 6-17-20068 with factor 0.85 (RS90)
135	Rough Machining of Shaft Pins (both OD Turning AND ID Boring) to PG 55 AND 56 from Solid Rods Or Stepped Pins (Rate Payable for the work involved based on machining done i.e.. the difference between the issued weight and finished weigh)(The rate of T-and-B Scrap generated is deductible from this rate)
136	GATE SHAFT MADE OUT OF TUBE DIA 219 (DRIVE)-Length above 3 Mtr to 5 Mtr Drg.No:- 3-57-430-27099 or equivalent (ROD DIA 140 SS MATERIAL)
137	A) GATE SHAFT MADE OUT OF TUBE DIA 273 (DRIVE)-Length above 4 Mtr to 5 Mtr Drg.No:- 3-57-490-00118 or equivalent with factor 1.00 (GS32)B) GATE SHAFT MADE OUT OF TUBE DIA 273 (DRIVE)-Length above 3 Mtr to 4 Mtr Drg.No:- 3-57-490-07173 or equivalent with factor 0.98 (GS31)C) GATE SHAFT MADE OUT OF TUBE DIA 273 (DRIVE)-Length up to 3 Mtr Drg.No:- 3-57-490-01403 or equivalent with factor 0.79 (GS30)D) GATE SHAFT MADE OUT OF TUBE DIA 273 (IDLER)-Length up to 3 Mtr Drg.No:- 3-57-490-17045 or equivalent with factor 0.58 (GS33)E) GATE SHAFT MADE OUT OF TUBE DIA 273 (IDLER)-Length above 3 Mtr to 4 Mtr Drg.No:- 3-57-490-15949 or equivalent with factor 0.62 (GS34)
138	A) GATE SHAFT MADE OUT OF TUBE DIA 219 (DRIVE)-Length above 4 Mtr to 5 Mtr Drg.No:- 3-57-490-14548 or equivalent with factor 1.00 (GS38)B) GATE SHAFT MADE OUT OF TUBE DIA 219 (DRIVE)-Length above 3 Mtr to 4 Mtr Drg.No:- 3-57-490-11943 or equivalent with factor 0.79 (GS37)C) GATE SHAFT MADE OUT OF TUBE DIA 219 (IDLER)-Length above 4 Mtr to 5 Mtr Drg.No:- 3-57-480-07393 or equivalent with factor 0.72 (GS41)D) GATE SHAFT MADE OUT OF TUBE DIA 219 (IDLER)-Length above 3 Mtr to 4 Mtr Drg.No:- 3-57-490-14549 or equivalent with factor 0.66 (GS40)E) GATE SHAFT MADE OUT OF TUBE DIA 219 (IDLER)-Length up to 3 Mtr Drg.No:- 3-57-490-11327 or equivalent with factor 0.60 (GS39)
139	A) GATE SHAFT MADE OUT OF TUBE DIA 159 (DRIVE)-Length above 4 Mtr to 5 Mtr Drg.No:- 3-57-490-02099 or equivalent with factor 1.00 (GS44)B) GATE SHAFT MADE OUT OF TUBE DIA 159 (DRIVE)-Length above 3 Mtr to 4 Mtr Drg.No:- 3-57-490-02616 or equivalent with factor 0.85 (GS43)C) GATE SHAFT MADE OUT OF TUBE DIA 159 (IDLER)-Length above 4 Mtr to 5 Mtr Drg.No:- 3-57-490-07404 or equivalent with factor 0.73 (GS47)D) GATE SHAFT MADE OUT OF TUBE DIA 159 (DRIVE)-Length up to 3 Mtr Drg.No:- 3-57-460-01428 or equivalent with factor 0.64 (GS42)E) GATE SHAFT MADE OUT OF TUBE DIA 159 (IDLER)-Length above 3 Mtr to 4 Mtr Drg.No:- 3-57-490-14315 or equivalent with factor 0.58 (GS46)F) GATE SHAFT MADE OUT OF TUBE DIA 159 (IDLER)-Length up to 3 Mtr Drg.No:- 3-57-490-03493 or equivalent with factor 0.41 (GS45)
140	Category:-LFLM - RS Group :LFLM04( TO QUOTE FOR ALL RS IN THIS GROUP)
141	A) Fabrication and Machining of Lab Seal Assy (Fab + M/C From Plate More than 75 Mm To 100 Mm Thick) Drg. 3-56-226-00477/02/00 Or Equivalent with factor 1.00 (D67F)B) Fabrication and Machining of SEAL ASSEMBLIES OF 56 PGMA LAB SEAL for Drg.No:- 2-56-228-03397 with factor 0.69 (D53A)C) Fabrication and Machining of Lab Seal Assy (Fab + M/C From Plate Up to 75Mm Thick) Drg. 3-56-171-01354/00/00; 1-56-226-01357/00/00; 4-56-135-00294/01/00 Or Equivalent with factor 0.56 (D67E)D) Fabrication and Machining of LAB SEAL ASSY (M/C from casting) Drg.4-56-135-00109 OR Equivalent with factor 0.35 (D67D)E) Fabrication and Machining of SUPPORT FOR SEALS OF 55 PGMA LAB SEAL; Drg no: 1-56-115-00092 with factor 0.15 (D54C)
142	A) Fabrication and Machining of FIXTURE FOR JEWEL BEARING AND ALSO TO DRG NO: 35500000519/01 35500000828 45500001123 45600001946 or equivalent with factor 1.00 (TK03)B) Machining of ADJUSTER SLEEVE/ ROD ASSEMBLY/ SAMPLING NOZZLE Drg.No:- 6-17-10037; 3-FW-725-14338 with factor 0.80 (AM07)C) Machining of Oil Drain Branch To Drg.No. 35533500940, 5521600390 Or Equivalent with factor 0.59 (PP02)D) Fabrication and Machining of FIXTURE FOR LOCK NUT AND ALSO TO DRG NO:35500000520/01 35500000521 or equivalent with factor 0.54 (TK04)
143	Category:-LFLM - RS Group :LFLM05( TO QUOTE FOR ALL RS IN THIS GROUP)
144	A) Machining of REDUCERS / SW COUPLINGS FROM ROD DIA 50 MM DRG NO.: 3-FW-725-14525 with factor 1.00 (D06B)B) Machining of PIPE NIPPLE UPTO 3 inch (from tube) Drg no : 4-52-272-00416 or equivalent with factor 0.83 (D03C)C) Machining of PIPE NIPPLE UPTO 2 inch (from tube) Drg No : 4-52-271-00810, 4-52-272-01257, 4-52-261-03097 or equivalent with factor 0.75 (D03B)D) Machining of REDUCERS / SW COUPLINGS UPTO ROD DIA 32 MM for Drg.No:- 4-53-261-00033 with factor 0.72 (D06A)E) Machining of PIPE NIPPLE UPTO 1 inch (from tube) Drg No : 4-52-211-00885 or equivalent with factor 0.66 (D03A)
145	A) Fabrication and Machining of REDUCERS / SW COUPLINGS ABOVE 32, 50 & UPTO ROD DIA 63 MM DRG NO.: 4-52-326-00220, 4-56-216-02102 or equivalent with factor 1.00 (D06C)B) Machining of SLEEVE FOR THERMOSTAT/ FSD Holder Drg.No:- 6-17-20190; 61710012 or equivalent with factor 0.86 (RS89)C) Machining of PIPE NIPPLE FROM ROD DIA 63 AND 80 MM Drg.No:- 4-52-326-00220, 4-55-124-00184 or equivalent with factor 0.62 (D04D)D) Machining of PIPE NIPPLE FROM ROD DIA 50 MM Drg.No:- 4-52-100-03487, 4-52-100-00650, 4-48-820-36211 or equivalent with factor 0.56 (D04C)E) Machining of PIPE NIPPLE FROM ROD DIA 40 MM Drg.No:- 4-52-326-00905, 4-52-274-01876 or equivalent with factor 0.54 (D04B)F) Machining of PIPE NIPPLE FROM ROD DIA 32 MM Drg.No:- 4-52-100-01140, 4-52-212-01310 or equivalent with factor 0.54 (D04A)
146	A) Machining of REDUCERS / SW COUPLINGS ABOVE ROD DIA 100 MM Drg.No:- 4-52-326-02265 with factor 1.00 (D06F)B) Machining of REDUCERS / SW COUPLINGS ABOVE 63 & UPTO ROD DIA 100 MM DRG NO.: 3-55-228-01504 with factor 0.70 (D06E)C) Machining of MANDREL AND ALSO TO DRG NO:45500001075 45600001957 OR EQUIVALENT with factor 0.38 (TK05)
147	A) Fabrication and Machining of OIL CARRY OVER DETECTOR/OIL INLET PIPE ASSY (HYDRO TEST TO BE DONE) Drg.No:- Drg.No:- 6-17-10006 or equivalent with factor 1.00 (D17)B) Poke Tube Assy (Economic cutting plan to be followed for example in drg. 6172-0147 or equivalent a length of 1115 mm will be issued for two pieces to be cut at 45 Deg. for effective utilization of material.) with factor 0.53 (R100)
148	Fabrication and Machining of OIL CIRCULATION UNIT for Drg.No:-1-52-274-01035 OR EQUIVALENT
149	A) Machining of EP SHAFT WITH OUT KEY WAY above Length 4Mtr Drg.No:- 3-79-025-00480 or equivalent with factor 1.00 (DE1M)B) Machining of EP SHAFT WITH OUT KEY WAY(Length 3 Mtr to 4Mtr) Drg.No:- 3-79-025-00480 or equivalent with factor 0.77 (DE1K)C) Machining of EP SHAFT WITH OUT KEY WAY(Length up to 3Mtr) for Drg.No:- 3-78-509-01170 or equivalent with factor 0.72 (DE1H)
150	Category:-LFLM - RS Group :LFLM06( TO QUOTE FOR ALL RS IN THIS GROUP)
151	Fabrication and Machining of Water Shield Assy as per Drgs . 2-52-262-00182 2-52-262-00781 2-52-262-01292 2-52-262-01315 2-53-262-00218 3-52-262-01802 3-52-262-01897 3-52-262-02174 3-52-262-02387 or equivalent
152	A) Fabrication and Machining of CORE COVER PLATE for Drg.No:- 3-55-214-00589 or equivalent with factor 1.00 (D69)B) Fabrication and machining of SUSPENTION ASSY for Drg.No:- 1-55-114-00421 or equivalent with factor 2.60 (D79)
153	Fabrication and Machining of SEALING COVER ASSY (UNDER Two/four split) to Drg. 2-52-262-00782, 1-52-261-00299 OR Equivalent
154	A) SUPP.BRG HSG COVER FABN AND M/C ING Drg.No:- 2-52-262-01792 or equivalent with factor 1.00 (D71)B) Statis Spl,Stat Spl,Sup Ring,SupBrgHsgCover M/c 1/1210/1812 or equivalent with factor 1.00 (AM83)
155	Fabrication and machining of Articulated Piece as per Drg 3-56-465-00009, 3-56-132-00008 or equivalent
156	A) Machining of BRG HOLDER OD 81 TO 125 MM Drg.No:- 4-48-013-35944 or equivalent with factor 1.00 (GM27)B) Machining of BRG HOLDER OD 51 TO 80 MM Drg.No:- 4-48-013-35173 or equivalent with factor 0.55 (GM26)C) Machining of LINKAGE BRG HOLDER Drg.No:- 2-48-003-40623 or equivalent with factor 0.37 (GM57)D) Machining of BRG HOLDER OD UPTO 50 MM with factor 0.35 (GM25)
157	Category:-LFLM - RS Group :LFLM07( TO QUOTE FOR ALL RS IN THIS GROUP)
158	A) Fabrication and Machining of SEALING TUBE ASSY/ Guide Trunnion Sealing Sleeve Assy Drg.No:- 2-52-261-00116, 3-52-261-01772, 2-52-261-00190 2-52-261-00710 2-52-261-02394 Or Equivalent with factor 1.00 (AM46)B) Trunnion Sleeve(For Fully Machining) to drgs. 3-52-011-00533 3-52-261-01959 3-53-261-00063 3-52-261-00515 3-52-261-01402 3-52-261-00399 or equivalent with factor 0.89 (AM88)
159	COMPLETE MACHINING OF SEALING ASSY AS PER DRAWING 25204103282 OR EQUIVALENT.REQUIRED ROD SIZES WILL BE SUPPLIED FROM SHOP
160	BUSH OD90 ID60 L198 (OD AND ID TURNING and KEYWAY -NO DRILL) DRG NO 3-57-570-27137 ITEM 02 or equivalent
161	A) Machining of Packing Box (Rod) Drg.No:- 6-17-20086 or equivalent with factor 1.00 (PB02)B) Machining of Packing Box (tube supplied instead of Rod)Drg.No:- 6-17-20086 with factor 0.88 (PB01)
162	A) Fabrication and Machining of DRIVE SHAFT BUSH/ COUPLING 0.5HP/ LEVER DRG NO 3-57-570-27137 ITEM 02/ 03, 6172-0216, 3-55-215-01737 OR equivalent with factor 1.00 (FD46)B) Machining of LEVER BOSS D83 KEYWAY AND TAP to Drg.No. 35720301162 or equivalent with factor 0.52 (PL01)C) fabrication and Machining of Lever I AND II without Keyway Boss Dia up to 100 mm without Flange Plate Drg.No:- 2-56-115-01381; 4-56-132-02649, with factor 0.46 (FD45)D) Fabrication and Machining of HAND CRANK ASSY Drg.No:- 3-52-326-00467 with factor 0.42 (D56)
163	fabrication and Machining of COMPENSATING WT.(STEEL) 12HUB. to Drg.No. 35533500961(0.63 Kg/No) or equivalent
164	Category:-LFLM - RS Group :LFLM08( TO QUOTE FOR ALL RS IN THIS GROUP)
165	FABRICATION OF ADJUSTER SIDE PLATES DRG. 3-52-042-02137 var.01, 02, 03 or equivalent
166	FABRICATION OF ADJUSTER TOP PLATES drg. 4-52-042-03459 or equivalent
167	DIPSTICK PIPE ASSY TO DRG NO. 35226202860 OR EQUIVALENT
168	LOCK TAB DRG NO-3-57-999-04620 (Manufacturing as per Drawing) OR EQUIVALENT
169	Stuffing Box Drg No- 3-57-580-25056 (Manufacturing as per drawing) OR EQUIVALENT
170	Sub Bracket Drg No- 3-57-583-26409 (Manufacturing as per drawing) OR EQUIVALENT
171	VIBRATION PICK UP PAD M/C MILLING DRILLING AS PER DRG '3/2233, 3/00960, 3/0755 OR EQUIVALENT
172	Category:-LFLM - RS Group :LFLM09( TO QUOTE FOR ALL RS IN THIS GROUP)
173	A) fabrication and Machining of BLADES WITH SHAFT FOR IGV/ ADJUSTABLE VANE > 650 MM UPTO 1600MM for Drg.No:- 2-56-114-03365; 3-55-124-00052 or Equivalent Drg /Process with factor 1.00 (IG12)B) fabrication and Machining of BLADES FOR REGULATING GEAR UPTO DIA 2500 MM AND ALSO TO DRG:10A007002 or Equivalent Drg /Process with factor 0.59 (IG10)C) fabrication and Machining of BLADES WITH SHAFT FOR IGV/ ADJUSTABLE VANE UPTO 650 MM for Drg.No:- 2-56-114-03365; 3-55-124-00052 or Equivalent Drg /Process with factor 0.55 (IG11)
174	Fabrication and machining of IGV Assembly Drg No: 0-56-224-02525 or Equivalent Drg /Process
175	Category:-LFLM - RS Group :LFLM10( TO QUOTE FOR ALL RS IN THIS GROUP)
176	A) Fabrication and Machining of EXCHANGEABLE VANE for Drg.No:- 3-55-124-00060 with factor 1.00 (EV01)B) Fabrication and Machining of DIAGONAL STAY to drg. 37903200467/02 or equivalent. Rate per No. is applicable for all lengths with factor 0.17 (F64B)
177	Category:-LM - RS Group :LM0001( TO QUOTE FOR ALL RS IN THIS GROUP)
178	A) Machining of GUIDE PIN ASSEMBLY Drg.No:- 6-17-10040 6-17-10058 with factor 1.00 (AM13)B) Fabrication and machining of ROLLER ASSY for Drg.No:- 4-52-045-00622 with factor 0.56 (D78)C) Machining of Blade pins Dia 33 mm for Drg 4-57-999-02124 with factor 0.56 (D02P)D) Machining of Blade pins Dia 25 mm for Drg 4-57-999-02123 or equivalent with factor 0.52 (D02N)
179	A) Machining of TAPER PINS (THREADED OR PLAIN)-Dia more than 10 mm Drg.No:- 3-53-010-00239, 4-55-226-02066 or equivalent with factor 1.00 (D12B)B) Machining of TAPER PINS (THREADED OR PLAIN)-Dia UPTO 10 mm. Drg no. 4-56-225-02071 or equivalent with factor 0.61 (D12A)C) Machining of LOCATING PIN (all variants) Drg.No:- 4-55-216-00550 or equivalent with factor 0.53 (D11D)D) Machining of GLANDS For Dampers Drg No.: 3-48-013-33559or equivalent with factor 0.51 (GM42)
180	A) COMPLETE FABRICATION OF LIFTING PIN AS PER DRAWING 45204103814 OR EQUIVALENT with factor 1.00 (F64I)B) ROUND D50 ID30 L34 (MANUFACUTING AS PER DRG NO 3-57-583-26503 ITEM 03) with factor 0.63 (GM08)
181	A) Machining of CHAIN PIN ABOVE D22 UPTO DIA 32 MM; Drg.No:- 3-48-460-35791 or equivalent with factor 1.00 (GM07)B) Machining of PIN I AND II Drg.No:- 4-56-132-02653 4-56-13202654, 4-79-023-00519 or equivalent with factor 0.80 (FD20)C) Machining of CHAIN PIN ABOVE DIA 16 UPTO DIA 22 MM; Drg.No:- 3-48-460-35791or equivalent with factor 0.73 (GM06)D) Machining of LOWER POST PIN Drg.No:- 6-17-10052 4-52-011-00906or equivalent with factor 0.56 (AM04)E) Machining of CHAIN PIN UPTO DIA 16 MM Drg.No:- 3-48-460-35791or equivalent with factor 0.53 (GM05)
182	Category:-LM - RS Group :LM0002( TO QUOTE FOR ALL RS IN THIS GROUP)
183	A) Complete Machining Of Retainer Plate-Pri More Than 40 mm (Including Drgs Nos 35226101774 Or Equivalent Having SameWork Content ) with factor 1.00 (AM58)B) Complete Machining Of Retainer Plate-Pri Up to 40 mm ( Including Drawings 25226100189 Or Equivalent Having SameWork Content ) with factor 0.20 (AM57)
184	A) Machining of RINGS/GREASE CONTOL RINGS/SPACER RINGS/DISTANCE RING/ BEARING BUSH OF ID ABOVE 200 MM UPTO 250 MM; Drg no: 4-55-335-02175 or equivalent with factor 1.00 (D86E)B) RINGS/GREASE CONTOL RINGS/SPACER RINGS/DISTANCE RING OF ID > 195 MM UPTO 205 MM.DRG 4/2172, 4/2177 OR EQUIVALENT with factor 0.86 (D86D)C) Machining of RINGS/GREASE CONTOL RINGS/SPACER RINGS/DISTANCE RING/ BEARING BUSH OF ID > 120 MM UPTO 200 MM; Drg no: 4-55-334-01976 or equivalent with factor 0.41 (D86C)D) Machining of RINGS/GREASE CONTOL RINGS/SPACER RINGS/DISTANCE RING/ BEARING BUSH OF ID > 50 MM UPTO 120 MM; Drg No: 4-55-335-02276 or equivalent with factor 0.36 (D86B)E) Machining of RINGS/GREASE CONTOL RINGS/SPACER RINGS/DISTANCE RING/ BEARING BUSH OF ID UPTO 50 MM 4-55-335-01658 or equivalent with factor 0.18 (D86A)
185	A) Machining of KNUCKLE CENTRE Drg No.: 3-48-003-55856, 3-57-999-24698 or equivalent with factor 1.00 (GM52)B) Machining of KNUCKLE LH/RH Drg No.: 3-57-999-24697, 3-48-003-55854 or equivalent with factor 0.71 (GM49)Prepared material will be issued from shop
186	A) Complete machining of Lifting device from Pl up to 75 including drilling and tapping. Drg like 3-55-328-02106 3-55-215-02065, 3-55-334-02057, 3-55-215-02062, 3-55-215-01997 or equivalent. OD cut blanks to be collected from shop. with factor 1.00 (PS69)B) Complete machining of Lifting device from Pl 90 including drilling and tapping. Drg like 3-55-227-01928, 3-55-227-02103 or equivalent. OD cut blanks to be collected from shop. with factor 1.40 (PS70)C) Complete machining of Lifting device from Pl 50/55 including drilling and tapping. Drg like 3-55-215-02065, 3-55-334-02057, 3-55-215-02062, 3-55-215-01997, 3/2466, 3/2755 or equivalent.Prepared material will be issued from shop. with factor 0.80 (PS68)
187	Category:-LM - RS Group :LM0003( TO QUOTE FOR ALL RS IN THIS GROUP)
188	A) Fabrication of CIRCM SEAL SETTING WEDGE to drg. 3-53-013-00226 or equivalent with factor 1.00 (D34)B) Fabrication and Machining of Basket Wedge for Drg.No:- 4-53-025-00232 with factor 0.27 (D41)
189	Category:-LM - RS Group :LM0004( TO QUOTE FOR ALL RS IN THIS GROUP)
190	DRIVE SHAFT 2 Drawing No.- 3-57-CX0-28529 or equivalent (Manufacturing as per Drawing)
191	Complete Machining Of Lifting Rod As Per 35204102531 Or Equivalent.Required Rod Sizes Will Be Supplied From Shop
192	A) Complete manufacture of Drive Shaft Dia up to 200 Length above 3 Mtr to 4 Mtr Drg.No:- 3-57-490-16499 or equivalent with factor 1.00 (GS52)B) Complete manufacture of Drive Shaft Dia up to 200-Length up to 3 Mtr Drg.No:- 3-57-490-06389 or equivalent with factor 0.92 (GS51)C) Complete manufacture of Idler Shaft Dia up to 200 -Length up to 3 Mtr Drg.No:- 3-57-490-16500or equivalent with factor 0.73 (GS54)
193	A) Complete manufacture of Drive Shaft Dia up to 110 -Length above 3 Mtr to 4 Mtr Drg.No:- 3-57-460-11919 or equivalent with factor 1.00 (GS58)B) Complete manufacture of Drive Shaft Dia up to 80 -Length above 3 Mtr to 4 Mtr; Drg no: 3-DM-999-09152 or equivalent with factor 1.00 (GS64)C) Complete manufacture of Drive Shaft Dia up to 110 -Length up to 3 Mtr Drg.No:- 3-57-010-15139 or equivalent with factor 0.92 (GS57)D) Complete manufacture of Idler Shaft Dia up to 110 -Length up to 3 Mtr Drg.No:- 3-57-010-15140 or equivalent with factor 0.74 (GS60)
194	A) Machining Of Slave Shaft Including Keyway Except Drilling To PG 57 From Solid S.S Rods For Dia less than equal to 100 Mm and length above 650mm and up to 800 MM ref Drg.No:- 4-57-999-02148 or equivalent with factor 1.00 (GS79)B) Machining Of Drive Shaft Including Keyway Except Drilling To PG 57 From Solid SS Rods For Dia Less than or equal to 100 Mm and length above 1150mm and up to 1300mm Drg.No:- 4-57-383-03579 or equivalent with factor 2.12 (GS83)C) Machining Of Drive Shaft Including Keyway Except Drilling To PG 57 From Solid SS Rods For Dia Less than or equal to 100 Mm and length above 1000mm and up to 1150mm . Drg.No:- 4-57-083-05509 or equivalent with factor 2.00 (GS82)D) Machining Of Drive Shaft Including Keyway Except Drilling To PG 57 From Solid SS Rods For Dia Less than or equal to 100 Mm and length 800mm to 1000mm .For Drg.No:- 4-57-223-04511 or equivalent with factor 1.60 (GS81)E) Machining Of Slave Shaft Including Keyway Except Drilling To PG 57 From Solid S.S Rods For Dia less than equal to 100 Mm and length 500 to 650 MM For Drg.No:- 4-57-423-05813 or equivalent with factor 0.78 (GS78)F) Machining Of Stub Shaft Except Drilling To PG 57 From Solid SS Rods For Dia Less than or equal to 100 Mm and length 400mm to 500 MM From Drg.No:- 4-57-999-02105 or equivalent with factor 0.56 (GS80) ( The Recovery Towards 100% Qty Of Turning And Boring As Per Respective Recovery Rate Schedule (For SS) Applicable From This Rate).
195	A) Machining of DRIVING SHAFT for Drg.No:- 4-55-215-01143 with factor 1.00 (RS93)B) Machining of EP SHAFTS WITH KEY WAY above Length 4Mtr; Drg no: 3-75-416-01179 with factor 0.70 (DE1R)C) Machining of EP SHAFTS WITH KEY WAY (Length 3Mtr to 4Mtr)/ Machining of SHAFT - II/ EERM Shaft (Sleeve supplied as component)- of all lenghts for Drg.No:- 3-79-316-01902; 3-78-217-03434 or Equivalent with factor 0.58 (DE1P)D) Machining of EP SHAFTS WITH KEY WAY(Length up to 3Mtr) Drg.No:- 6-17-20171 ; 6-17-20172 with factor 0.43 (DE1N)
196	A) Machining of SHAFT Drg.No:- 6-17-20069 with factor 1.00 (RS94)B) COMPLETE MACHINING OF SHAFT ROD AS PER DRAWING 35204102529 OR EQUIVALENT with factor 2.42 (F64J)C) Machining of ADJUSTING ROD from SA105-Rod D63 L1100 to Drg.No. 25533500751 (20 Kg/No.) or equivalent with factor 0.63 (PA30)
197	Category:-LM - RS Group :LM0005( TO QUOTE FOR ALL RS IN THIS GROUP)
198	FINISH CUTTING ZRA AND ZRI MACHINING AND ASSY PER DRG 4-55-216-02946 OR EqUIVALENT
199	A) Machining of BUSH from D100 L65 to Drg.No. 35521400218/03 35533500950/01 or equivalent with factor 1.00 (PB50)B) fabrication and Machining of IGV SHAFT BUSH AND ALSO TO DRG:45512400144 with factor 0.86 (IG16)C) Machining of Fan Damper Bearing Housing To Drg. 25622700499 25625500052 Or Equivalent. Complete machining as per Drg . Casting will be collected from Shop with factor 0.52 (FD44)D) Machining of BUSH from BMCQ45-Rod D100 L40 to Drg.No. 45521400267/05(0.28 Kg/No.) or equivalent with factor 0.41 (PB52)
200	A) Machining of DISTANCE RING from Rod D80 L70 to Drg.No. 35521400644/02 (0.74 Kg/No) or equivalent with factor 1.00 (PD10)B) Machining of ARRESTING RING from SA105-Rod D200 L33 to Drg.No. 45521400480/03 (1.2 Kg/No.), 45521400256/04(1.7 Kg/No.) or equivalent with factor 1.26 (PA44)C) Machining of DISTANCE RING from IS2062 GrA-Plate 20 x D230 to Drg.No. 45533501654 (1.231 Kg/No.) or equivalent. Prepared material will be issued from shop. with factor 1.00 (PD69)D) Machining of OIL SKID RING from P355Nh-Plate 18 x D210 to Drg.No. 45533401749 (0.9 Kg/No.) or equivalent. Prepared material will be issued from shop. with factor 1.00 (PP21)
201	Machining of Distance Ring from P355NH-Plate 40 x D190 to Drg. 45533401748 (1.8 Kg/No) or equivalent. Prepared material will be issued from shop.
202	A) Machining of RING from SA105-Rod D125 L20 to Drg.No. 45521601016/01 (0.4 Kg/No.) or equivalent with factor 1.00 (PR13)B) Machining of RINGD80x10 from SA105-Rod DIA 100 x 15 to Drg.No. 45533501658(0.23 Kg/No.) or equivalent with factor 0.70 (PR15)C) Machining of RING from SA105 Rod D80 L10 to Drg.No. 45521400479/01 (0.01 Kg/No.) or equivalent with factor 0.29 (PR06)
203	A) complete machining of Cover of oil drain from Pl 18 with dia above 120 up to 145 mm to drg no 4-55-328-03022 or equivalent. or equivalent . with factor 1.00 (PS66)B) complete machining of Cover of oil drain from Pl 18 with dia 110- 120 mm to drg no 4-55-216-02941 or equivalent. Raw material to be collected from stores. with factor 0.89 (PS65)C) complete machining of Cover of oil drain from Pl 18 with dia above 145 mm up to 165mm to drg no 4-55-227-02761 or equivalent. Raw material to be collected from stores. with factor 0.77 (PS67)D) complete machining of Cover of oil drain from Pl 18 up to dia 110 mm to drg no 4-55-215-02699 or equivalent. Raw material to be collected from stores. with factor 0.55 (PS64)
204	A) complete machining of oil drain from Rod Dia 120 to drg no 3-55-216-02064 or equivalent. Rod to be collected from stores. with factor 1.00 (PS72)B) complete machining of oil drain from Rod Dia 160/165 to drg no 3-55-227-01874 3-55-328-02108 or equivalent. Rod to be collected from stores. with factor 1.28 (PS74)C) Machining of RING to Drg.No. 35533500939 or equivalent. Prepared material will be issued from shop. with factor 0.84 (PR31)D) Machining of RING DIVIDED for Drg.No:- 3-55-334-00227 with factor 0.81 (D37)E) complete machining of oil drain from Rod Dia 110 to drg no 3-55-215-01848 or equivalent. Rod to be collected from stores. with factor 0.46 (PS71)
205	complete machining of Oil ring from Pl50 including drilling and tapping to drg no 4-55-227-02662 or equivalent. Prepared material to be collected from shop.
206	Category:-LM - RS Group :LM0006( TO QUOTE FOR ALL RS IN THIS GROUP)
207	A) Machining of CHIMNEY HEX NUT M90 for Drg.No:- 40-A-006-035 with factor 1.00 (CH10)B) Machining of HEXAGONAL NUT LH 45611500368/01 OPSKFAN0124 or equivalent with factor 0.64 (FD31)C) Machining of Spanner (Hexagonal Hollow Milling) Drg.No:- 6-17-20104 with factor 0.50 (HM01)D) Machining of HEXAGONAL NUT RH 45512400178/02 45511200645 OR EQUIVALENT with factor 0.36 (FD30)E) Fabrication of CIRCM SEAL ANGLE SPANNER for Drg.No:- 3-53-013-00227 with factor 0.33 (D35)
208	A) Machining of Studs SA193B7/SA105 above M36 Rate payable for every 100 mm of Thread length (any partial length will be rounded to next higher 100) Drg no. 3-55-000-02198 or equivalent with factor 1.00 (D08J)B) Machining of Studs SA193B7/SA105 above M30 and upto M36 Rate payable for every 100 mm of Thread length (any partial length will be rounded to next higher 100) Drg.No:- 2-56-000-03220 or equivalent with factor 0.80 (D08D)C) Machining of Studs SA193B7 /SA105 above M24 and up to M30 Rate payable for every 100 mm of Thread length (any partial length will be rounded to next higher 100) Drg.No:-3-48-013-33558 or equivalent with factor 0.71 (D08C)D) Machining of Studs SA193B7/SA105 up to M24 Rate payable for every 100 mm of Thread length (any partial length will be rounded to next higher 100) Drg.No:- 3-48-013-33558or equivalent with factor 0.55 (D08B)
209	A) Manufacture of HEX BOLT UPTO M52X450 4-52-042-04449 or equivalent with factor 1.00 (D13D)B) Manufacture of HEX BOLT UPTO M36X200 4-52-042-04448 or equivalent with factor 0.71 (D13C)C) Manufacture of HEX BOLT UPTO M24X180 4-53-242-00877 or equivalent with factor 0.66 (D13B)D) Manufacture of HEX BOLT UPTO M20X160 Drg.No:- 6-17-10098 or equivalent with factor 0.60 (D13A)E) M/cing of FIT BOLTS M20 Drg:4-56-225-01633 or equivalent with factor 0.42 (D10B)F) Machining of FIT BOLTS M16 Drg.No:- 4-54-100-00039 or equivalent with factor 0.33 (D10A)
210	A) Machining of SCREW PLUG FP 2 inch (45521400460/01) with factor 1.00 (D13E)B) Machining of PLUG SCREW M48X1.5 from SA193B7-Rod D63 L45 to Drg.No. 45521601288 (0.5 Kg/No.) or equivalent with factor 0.80 (PP12)C) Machining of ADAPTOR FP 3/8 inch from BMC45 Rod D50 L25 to Drg.No. 45521400296/02(0.02 Kg/No.) or equivalent with factor 0.66 (PA01)D) Machining of PLUG M18X1 Drg.No:- 4-55-214-00482 with factor 0.26 (D49)
211	A) Machining of ADAPTER FP 1/2 inch-M18X1 to drg 45533401334/01 (SA105 ROD D36 L40 WEIGHT 0.1 KG/NO) OR Equivalent with factor 1.00 (D42)B) Machining of SCR.PLUG M30X1.5 to Drg.No. 45521400474/02 (0.2 Kg/No.) or equivalent with factor 0.78 (PS01)C) Machining of SCREW PLUG from Rod to Drg.No. 45521400482/02 (0.05 Kg/No.) 45521400469/03 45521400277/02 or equivalent with factor 0.47 (PS03)
212	Category:-LM - RS Group :LM0007( TO QUOTE FOR ALL RS IN THIS GROUP)
213	A) Machining of SEAL RING RETAINER to drg-no 3-52-261-00402 or equivalent with factor 1.00 (AM18)B) Machining of ALUMINIUM SEAL RING UPTO DIA 500 MM SUPPLIED IN TWO PIECES Drg.No:- 2-52-261-00969 3-52-561-00731 or equivalent with factor 0.86 (AM19)C) Machining of BRASS PACKING COVER (2 HALVES) Drg.No:- 3-52-261-00114 with factor 0.48 (AM50)
214	A) Machining of Aluminium Seal Ring Above Outer Dia 1000 mm (Including Drgs 3-52-011-02112 Or Equivalent). Segments will be issued from shop. with factor 1.00 (AM32)B) Machining of Aluminium Seal Ring Outer Dia 500 - 1000 mm (Including Drg.3-52-011-00955 3-52-261-01773 Or Equivalent) with factor 0.80 (AM31)
215	Complete Manufacturing Of Spacer Ring Segment Assy As Per The Drawings 25201102392 25201102928 And 35201101370 Or Equivalent Drawings Having Same Work Content
216	Machining of ADJUSTER ROD drg. 25204500034/02 35203000902/05 35204500236/02 35226100400/05 35500001082 35500001084 45203000330/08 or Equivalent
217	fabrication and Machining of IGV CONTROL LINK FOR IGV ASSYS DIA UPTO 1600MM AND ALSO TO DRG:25611302289/05
218	A) fabrication and Machining of CONNECTING PIECE from Rod D80 L110 to Drg.No. 35521600507(1.09 Kg/No) 35533500946 or equivalent with factor 1.00 (PC10)B) Fabrication and machining of Turn Buckle for Drg.No:- 3-55-125-00266 with factor 1.21 (D76)C) fabrication and Machining of CONNECTING PIECE from Rod D40 L75 to Drg.No. 35533500955 ( 1.0 Kg/No.) or equivalent with factor 0.82 (PC12)D) Machining of FORK from Rod D40 L70 to Drg.No. 35521400101/02 (0.26 Kg/No.) or equivalent with factor 0.79 (PF30)
219	Category:-LM - RS Group :LM0008( TO QUOTE FOR ALL RS IN THIS GROUP)
220	A) Fabrication and Machining of FLANGES BORE ABOVE 200 MM and up to 500MM (For SS flanges, prepared matl shall be supplied from Shop) Drg.No:- 4-55-334-01422, 2-FW-861-01429, 4-52-261-03089 or equivalent drg with factor 1.00 (D15F)B) Fabrication and Machining of FLANGES BORE >100 MM UPTO 200 MM (For SS flanges, prepared matl shall be supplied from Shop) Drg.No:- 4-55-334-01422, 2-FW-861-01429, 4-52-261-03089 or equivalent drg with factor 0.53 (D15E)C) Machining of FLANGES/ GLAND BORE >75 MM UPTO 100 MM (For SS flanges, prepared matl shall be supplied from Shop) Drg.No:- 4-55-334-01422, 2-FW-861-01429, 4-52-261-03089, 6-17-20093 or equivalent drg with factor 0.40 (D15D)D) Machining of FLANGES/ Support Rod guide of BORE >40 MM UPTO 75 MM (For SS flanges, prepared matl shall be supplied from Shop) Drg.No:- 4-55-334-01422, 2-FW-861-01429; 4-52-261-03089 or equivalent drg with factor 0.37 (D15C)
221	A) Fabrication and Machining of FLANGES BORE ABOVE 500 MM (For SS flanges, prepared matl shall be supplied from Shop) Drg.No:- 4-55-334-01422, 2-FW-861-01429, 4-52-261-03089 or equivalent drg with factor 1.00 (D15G)B) Machining of SCREW RING for Drg.No:- 3-55-124-00046 with factor 0.78 (D36)
222	A) Machining of STOP RING from SA105-Rod 200 L25 to Drg.No. 45521600979 (1 Kg/No.) or equivalent with factor 1.00 (PS30)B) Machining of STOP RING from P355NH-Plate 25/20 x D180 to Drg.No. 45533501664 (1.1 Kg/No.)45533501665 or equivalent. Prepared material will be issued from shop. with factor 0.71 (PS83)C) Fabrication and Machining of Support Bracket Drg.No:- 6-17-20153 with factor 0.67 (R101)
223	A) Machining of SUPPORTING RING from SA105 Rod D165 L20 to Drg.No. 45521400475/01 (0.4 Kg/No.) or equivalent with factor 1.0 (PS54)b) Machining of COVER from P355NH-Plate 20 D230 to Drg.No. 35533500952 (4.1 Kg/No)or equivalent. Prepared material will be issued from shop. with factor 0.54 (PC58)
224	A) Fabrication and Machining of SUPPORTING FLANGE Drg.No:- 6-17-20159 with factor 1.00 (RS86)B) Machining of FLAP FLANGE MORE THAN DIA 160 MM Drg.No:- 4-56-228-03055 with factor 0.82 (FD40)C) Machining of DUMMY FLANGE Drg.No. 45533501647 3-FW-863-05501 or equivalent with factor 0.52 (PD60)D) Machining of FLANGE from BMC16-Plate 32x D165 to Drg.No. 45521600862(3.83 Kg/No.) or equivalent with factor 0.42 (PF22)E) Machining of FLANGES BORE/ POINTER UPTO 40 MM (For SS flanges, prepared matl shall be supplied from Shop) Drg.No:- 4-55-334-01422, 2-FW-861-01429, 4-52-261-03089, 3-55-335-00504 or equivalent drg with factor 0.30 (D15A)
225	Category:-LM - RS Group :LM0009( TO QUOTE FOR ALL RS IN THIS GROUP)
226	A) Machining of Keys made out of Rod Dia more than 50 up to 80mm, length 150 - 250 mm Drg no :- 4-55-335-02171 with factor 1.00 (KY12)B) Machining of Keys made out of Rod Dia more than 50 up to 80 mm, length 100 - 150 mm Drg No :- 4-56-135-03940 with factor 0.92 (KY11)C) Machining of Keys made out of Rod Dia more than 50 up to 80 mm, length up to 100 mm Drg no ;- 4-56-114-02860 with factor 0.88 (KY10)D) Keys made out of Rod Dia more than 32 up to 50 mm, length 150 - 250 mm Drg No :- 4-57-560-24979 with factor 0.56 (KY09)E) Machining of Keys made out of Rod Dia more than 32 up to 50 mm, length 100- 150 mm Drg no :- 4-55-214-00278 with factor 0.52 (KY08)F) Machining of Keys made out of Rod Dia more than 32 up to 50 mm length up to 100 mm Drg no:- 4-55-328-03433 with factor 0.48 (KY07)G) Machining of Keys made out of Rod Dia more than 16 up to 32mm, length 150 - 250 mm Drg no :- 4-57-999-02113 ; 4-56-114-03890 with factor 0.41 (KY06)H) Machining of Keys made out of Rod Dia more than 16 upto 32 mm, length 100 - 150 mm Drg :- 4-56-256-01530 ; 4-57-583-24910 with factor 0.37 (KY05)I) Machining of Keys made out of Rod Dia more than 16 upto 32 mm, length up to 100 Drg: 4-57-560-24977 with factor 0.33 (KY04)J) Machining of Keys made out of Rod Dia upto 16mm, length up to 100 mm Drg: 4-55-355-01294; 3-52-100-03219 with factor 0.21 (KY01)
227	A) Machining of LOCK KEY 3X10X16 from P355NH-Plate 5 to Drg.No. 45533401757 (0.004 Kg/No.) or equivalent with factor 1.00 (PL30)B) Machining of LOCATING PIN D12x20 from SA193B7-rod 25 L30 to Drg.No. 45521401782(0.016 Kg/No.) or equivalent with factor 0.66 (PL20)
228	Category:-LM - RS Group :LM0010( TO QUOTE FOR ALL RS IN THIS GROUP)
229	A) Complete manufacturing of Counter weight from forgings to thickness of 110mm with length 450-550 mm as per drawings like 2-55-227-01599 , 2-55-227-01847 or equivalent. with factor 1.00 (PC43)B) Complete manufacturing of Counter weight from forgings to thickness of 150mm with length 600-680 mm as per drawings like 3-55-228-01655, 3-55-228-02165 equivalent. with factor 1.50 (PC45)C) Complete manufacturing of Counter weight from forgings to thickness of 120mm with length 500-600 mm as per drawings like 2-55-227-01873 , 2-55-227-01994 or equivalent. with factor 1.10 (PC44)D) Complete manufacturing of Counter weight from plate of thickness 120 mm as per drawings like 2-55-328-02060 or equivalent. Prepared material to be collected from shop. with factor 1.00 (PC46)E) Complete manufacturing of Counter weight from forgings to thickness of 100mm with length 450-550 mm as per drawings like 2-55-227-01407 or equivalent. with factor 0.90 (PC42) (Forging/Casting to be collected from stores) (In case of plates, prepared material will be issued from shop)
230	A) Complete manufacturing of Counter weight from plate 50 mm with length 200-300 mm as per drawings like 3-55-216-01472, 4-55-216-02986, 3-55-997-01683 or equivalent. Prepared material to be collected from shop. with factor 1.00 (PC49)B) Complete manufacturing of Counter weight from plate 63/75 mm and length 250-300 mm as per drawing like 3-55-216-01886, 3-55-215-01527, 2-55-215-01699 or equivalent. Prepared material to be collected from shop. with factor 1.10 (PC52)C) Complete manufacturing of Counter weight from plate 40 mm with length 250-300 mm as per drawings like 3-55-334-02187 or equivalent. Prepared material to be collected from shop. with factor 0.90 (PC47)
231	A) Complete manufacturing of Counter weight from plate 75 mm and length above 300 up to 350 mm as per drawing like 2-55-215-01626, 2-55-216-01801 or equivalent. Prepared material to be collected from shop. with factor 1.00 (PC53)B) COUNTER WEIGHT from P355NH-Plate 75x80x170 to Drg.No. 35533401158 (2.682) 35533401125 (2.682 Kg/No.) or equivalent. Prepared material will be issued from shop. with factor 0.82 (PC60)
232	Category:-LM - RS Group :LM0011( TO QUOTE FOR ALL RS IN THIS GROUP)
233	Machining of ADJUSTING DISC FINISHED PART to Drg.No. 25533500749 or equivalent
234	Machining of Axial Roller Brg 51308 to Drg.No. 45521400315/02 (0.55 Kg/No.) or equivalent
235	A) Machining of ADJUSTING RING from WSTE335-Plate 28 x 625 to Drg.No. 45521601040(20.3 Kg/No.) or equivalent. Prepared material will be issued from shop. with factor 1.00 (PA62)B) Machining of ADJUSTING RING from P355Nh-Plate 25 x D450 to Drg.No. 45533501685/01 (8 Kg/No.) or equivalent. Prepared material will be issued from shop. with factor 0.51 (PA63)
236	A) Machining of FLANGE 2 PARTS to Drg.No. 0-GH-100-00078 or equivalent with factor 1.00 (PF24)B) Machining of FLANGE from BMC16-Plate 32 D365 to Drg.No. 25521600316(2.05) or equivalent with factor 0.74 (PF20)C) Machining of FLANGE 2 PARTS from 2C35-Rod D250 L60 to Drg.No. 45521600972(7 Kg/No.) or equivalent with factor 0.44 (PF25)
237	Category:-LM - RS Group :LM0012( TO QUOTE FOR ALL RS IN THIS GROUP)
238	ADAPTOR SLEEVE ROUGH MACHINING to sketch OP-SK-APH-2329, OP-SK-APH-0622 Or equivalent
239	BEARING HOUSING DRG NO 3-57-570-26617 (Manufacturing as per Drawing) OR EQUIVALENT
240	Flange Coupling Drg No- 3-57-580-27977 (Manufacturing as per drawing) OR EQUIVALENT
241	IMPELLER BUSH MACHINING FD/PA AS PER DRG NO 4-55-216-03337, 4-55-335-03593 OR EQUIVALENT
242	IMPELLER BUSH MACHINING FOR ID FAN AS PER DRG NO 4-55-328-03185, 4-55-227-03005 OR EQUIVALENT
243	Machining of Adopter RTD and Adopter Mist as per drg 4/55//2019, 4/55/2020 or equivalent from Rounds
244	Manufacturing of Spring Bolt as per drawing 4/55/3024 or Equivalent from Rounds
245	Machining of THRUST ROD NUT to Drg.No. 35533401012 or equivalent
246	SLIDING BLOCK MACHINING AS PER DRG 3-55-228-02263, 3-55-227-02264, 4-55-227-03141, 4-55-287-03607, 4-55-215-02639 OR EQUIVALENT
247	Category:-LM - RS Group :LM0013( TO QUOTE FOR ALL RS IN THIS GROUP)
248	Complete machining of tension ring/pre load ring from Pl 63 including grinding, drilling, tapping,etc to drg 2-55-335-01316, 2-55-335-01317 or equivalent. OD, ID cut prepared material to be collected from shop.
249	Complete machining of Operating Ring as per drg 2-55-334-01040 or equivalent. Forging Dia 420 L120 will be issed.
250	a) Complete Machining of Thrust Ring as oer drg 2-55-227-02326 or 2-55-287-02409 or equivalent .b) for fd thrust ring 3-55-216-01946 or equivalent 0.4 factor will be applied. c)for PA th ring 2-55-335-01321 or equivalent factor 1.2 will be applied Prepared material will be issued from shop
251	a) Complete Machining of Thrust DISc as oer drg 2-55-227-01585 or equivalent .b) for FD thrust DISC 2-55-216-02569 or equivalent 0.36 factor will be applied. c)for PA th DISC 2-55-335-02604 or equivalent factor 0.6 will be applied Prepared material will be issued from shop
252	Category:-LM - RS Group :LM0014( TO QUOTE FOR ALL RS IN THIS GROUP)
253	Tu 7x2 Cut To Length 78mm For Emitting Electrode; Drg No: 3-79-015-00997/02 Or Equivalent
254	Category:-LMCN - RS Group :LMCN01( TO QUOTE FOR ALL RS IN THIS GROUP)
255	A) Machining of Adjusting lever to drg:2-55-227-02044 or equivalent. Lever forgings to be collected from store. with factor 1.00 (PA22)B) Machining of Adjusting lever to drg:2-55-228-01604 or equivalent. Lever forgings to be collected from store. with factor 1.20 (PA23)C) Machining of Adjusting lever to drg: 2-55-227-01740 or equivalent. Lever forgings to be collected from store. with factor 1.00 (PA21)
256	Machining of BRG RACE-REWORK from Brg 51406-V ABN to Drg.No. 45533501662 (0.43 Kg/No.) or equivalent
257	A)Complete machining of TLT Blade Shafts with M45 or M55 or M60 or M65 thread size and length upto 500mm including Grinding,Thread cutting, Key way cutting, Drilling and Tapping etc.. 1-55-334-01137 or equivalent. Blade shaft weigh 4.1 to 6 kgs loaded as base rate with factor 1.0 Following are the applicable factor for various length of Blade shaft;B)Blade Shaft weight Less than 4 kg, apply factor 0.8C)Blade Shaft weight between 6.1 to 8 apply factor 1.2D)Blade Shaft weight between 8.1 to 10, apply factor 1.5 E)Blade Shaft weight above 10.1 kg and above apply factor 1.75Forged blade shaft with required machining allowance to be collected from STORES
258	Complete machining of Blade shaft nut with thread size M75, M90, M100 including drilling, tapping, thread cutting, slotting etc. to drg 2-55-328-02066, 25522701790, 3-55-228-01657 or equivalent. Forged nuts to be collected from stores.
259	A)Complete machining of KKK Blade Shafts with M35 thread and length Complete machining of Blade Shafts with M35 OR M45 thread and 300–500 mm length, including grinding, thread cutting, keyway cutting, drilling, and tapping as per drawing 1-55-214-00172, 2-55-335-00748 or equivalent.B)Factor 1.6 is applicable only for drawing 1-55-216-00435.C) Machining of BLADES SHAFTS FOR IGV ASSYS UPTO 1600MM DIA DRG:25512600212 with factor 0.81 (IG13)Forged Blade shafts with machining allowance are to be collected from stores.Forged blade shaft with required machining allowance to be collected from stores
260	A) Complete machining of lock nut with thread size M35 including drilling, tapping, thread cutting, slotting etc. to drg4-55-335-001690 or equivalent. Rod dia 80 mm to be collected from stores. with factor 1.00 (PB44)B) Complete machining of lock nut with thread size M45 including drilling, tapping, thread cutting, slotting etc. to drg 3-55-216-00501 or equivalent. Rod dia 100 mm to be collected from stores. with factor 1.00 (PB45)C) Machining of LOCKING NUT M30x1.5 from SA193B7-Rod D80 L37 to Drg.No. 25521400173/03 Drg.No. OPSKFAN00121 or equivalent with factor 0.70 (PL31)D) Machining of PAD Drg.No:- 6-17-20077 with factor 0.55 (RS82)
261	A)Complete Manufacture of BLADE SHAFT NUT M55 X 2 and M52 X 2 from 42CrMo4V-Forging D130 L100 to Drg.No. 25521501032 25521601687 or equivalent (PB59)B)Complete Manufacture of BLADE SHAFT NUT M45 X 1.5 from 42CrMo4V-Rod D100 L75 to Drg.No. 25533400803 25533401034 or equivalent. with factor 0.872 (PB58)
262	A) complete manufacture of bearing/distance bush from plate 75 to 90 mm similar to Drg no 3-55-227-01649 or equivalent . ID, OD cut prepared material to be collected from shop with factor 1.00 (PB61)B) complete manufacture of bearing/distance bush from Rod dia 200 similar to Drg no 3-55-328-02100 or equivalent . Raw material to be collected from stores with factor 1.15 (PB63)
263	Complete manufacture of bearing/distance bush from Rod dia 125 similar to Drg no 3-55-215-01769 or equivalent . Raw material to be collected from stores
264	complete manufacture of bearing/distance bush with ID groove from plate 50 to 75 mm similar to Drg no 3-55-334-01173, 3-55-334-01009 or equivalent . ID, OD cut prepared material to be collected from shop
265	A) complete manufacture of Support ring and bearing covers from Rod dia 125 to 145 mm similar to drawing 4-55-228-03063, 4-55-228-03056 or equivalent with factor 1.00 (PB67)B) BUSH from Rod D100, L65 to Drg.No. 35533500950/01 (0.5 Kg/No.) or 4/2257, 4/2378, 4/2436, 4/2437 OR equivalent with factor 0.84 (PB51)C) complete manufacture of Support ring and bearing covers from Pl 18 mm with dia 110 to 125 mm similar to drawing 4-55-328-02991, 4-55-328-02994 or equivalent. with factor 0.65 (PB84)D) Machining of BUSH from WSTE36-Plate 90 x D185 to Drg.No. 45521600882/03 (1.87 Kg/No.) or equivalent. with factor 0.65 (PB81)E) complete manufacture of Support ring and bearing covers from Rod dia 100 mm similar to Drg no 4-55-216-02268, 4-55-216-02261 or equivalent. with factor 0.65 (PB66)F) complete manufacture of Support ring and bearing covers from Rod dia 80 mm similar to Drg no 4-55-335-02277 or equivalent. with factor 0.40 (PB68)G) Complete machining of Bearing Covers as per drg (4-55-334-01761) including drilling tapping and slotting etc. with factor 0.40 (D82L)H) fabrication and Machining of Bearing Cover-6007 From Sa193B7-Rod D80 L20 To Drg.No. 45533401761(0.15 Kg/No.) Or Equivalent with factor 0.40 (PB10)I) Machining of SUPPORT COVER from Sa193B7-Rod D80 L15 to Drg.No. 45533401762 (0.13 Kg/No.) or equivalent with factor 0.40 (PS51)(Rod/Forging/Casting to be collected from stores) (In case of plates, prepared material will be issued from shop)
266	A)Complete machining of TLT Blade Shafts with M75 or M80 or M90 or M100 thread size and length 500mm to 1000mm including Grinding,Thread cutting, Key way cutting, Drilling and Tapping etc.. Complete machining of Blade Shafts with M90 thread and length 600-800mm including grinding,thread cutting, key way cutting, drilling and tapping etc..similar to drawing 1-55-227-01872 (wt 34.5 kg) (Blade Shaft weight between 32.1 to 38 )or equivalent will be loaded as base rate with factor 1.0 Following are the applicable factor for various length of Blade shaft;B)Blade Shaft weight Less than 27 kg, apply factor 0.8C)Blade Shaft weight between 27.1 to 32, apply factor 0.9D)Blade Shaft weight between 38.1 to 47, apply factor 1.1 E)Blade Shaft weight above 47.1 kg apply factor 1.2
267	A) Machining of DISTANCE BUSH from SA193B7-Rod D100 L40 to Drg.No. 45533401759 (0.3 Kg/No.) or equivalent with factor 1.00 (PD01)B) BUSH from SA105-Rod 100 L35 to Drg.No. 45533501661(0.44 Kg/No.) or equivalent with factor 1.00 (PB56)C) Machining of BUSH from Naxtra70-Plate 40xD135 to Drg.No. 45521601018 (0.8 Kg/No) or equivalent. Prepared material will be issued from shop. with factor 1.00 (PB82)D) Machining of Ring To Drg.No. 45521400268 45521600971 Or Equivalent. Prepared material will be issued from shop. with factor 1.00 (PR23)E) Machining of BUSH from Tube 127 x 20 L60 to Drg.No. 45521401274/02 (0.125 Kg/No.) or equivalent with factor 0.30 (PB55)
268	Complete Machining of LEVER to Drg.No. 25521400169/03 35533500945 or equivalent
269	A) Complete Machining of ADJUSTING LEVER R50 to Drg.No. 25521600376 25533400804 2-55-215-01033 2-55-215-01460 or equivalent with factor 1.00 (PL05)B) Complete Machining of ADJUSTING LEVER R50 from unmachined casting to Drg.No. 25533400805 (0.4 Kg/No.) or equivalent with factor 1.00 (PA20)
270	Machining of PRESSING RING to Drg.No. 35521600500/01 35533500944 or equivalent
271	Rework of Bearing race of AP impellers as per drg 3-55-227-01862, 4-55-216-01019 or equivalent. Bearing race to be collected from shop.
272	Category:-LMCN - RS Group :LMCN02( TO QUOTE FOR ALL RS IN THIS GROUP)
273	A) Complete machining of Push/Thrust rod of length above 1250 up to 1750 mm including grinding, thread cutting, drilling,etc to drg like 1-55-334-01138, 1-55-335-01615, 1-55-335-01717 or equivalent. Forged rod to be collected from stores. with factor 1.00 (PB77)B) Complete machining of Push/Thrust rod of length 1000-1250 mm including grinding, thread cutting, drilling,etc to drg like 1-55-334-01095 or equivalent. Forged rod to be collected from stores. with factor 0.80 (PB76)
274	Complete machining of Push/Thrust rod of length above 2000 up to 2500 mm including grinding, thread cutting, drilling,etc to drg 1-55-328-01878 or equivalent. Forged rod to be collected from stores.
275	A) Complete machining of SHAFT as per drg including drilling thread cutting key way cutting etc.. Raw forging to be collected from stores. Drg 1-55-335-00886 1-55-334-00975 or equivalent with factor 1.00 (R140)B) Complete machining of SHAFT as per drg including drilling thread cutting key way cutting etc.. Raw forging to be collected fromstores . Drg.1-55-334-01135 1-55-335-01416 or equivalent with factor 1.00 (R141)
276	Machining of Shaft with bearing assy (NDM 11 Type) drg. 1-56-171-01280/05 1-56-132-01497/01 or equivalent type) as per drg/QWI
277	Complete machining of SHAFT as per drg 1-55-216-01889 or equivalent including drilling, thread cutting, keyway cutting etc.. Raw forging to be collected from stores.
278	RADIAL FAN SOLID SHAFT MACHINING AS PER DRG 1-56-134-03451, 3-56-134-05628 OR EQUIVALENT.
279	SEAL AIR FAN SHAFT AS PER DRG 2-56-171-01165, 1-56-173-02913 OR EQUIVALENT
280	FAN SHAFT GRINDING AS PER SCOPE REF DRG NO 1-55-216-01889 OR EQUIVALENT
281	Category:-LMCN - RS Group :LMCN03( TO QUOTE FOR ALL RS IN THIS GROUP)
282	Complete machining of SHAFT as per drg 1-55-227-01685 or equivalent including drilling, thread cutting, keyway cutting etc.. Raw forging to be collected from stores.
283	FAN SHAFT GRINDING AS PER SCOPE REF DRG NO 1-55-328-01881 OR EQUIVALENT
284	Category:-LMCN - RS Group :LMCN04( TO QUOTE FOR ALL RS IN THIS GROUP)
285	Fabrication of PIN RACK BAR Drg.No:- 4-52-010-03299
286	A) Machining of SPLASH RING to Drg.No. 45521600849 or equivalent. Prepared material will be issued from shop. with factor 1.00 (PS81)B) Machining of SPLASH RING from IS2062-Plate 32 x D270 to Drg.No. 45533501653/01 (2.264 Kg/No.) or equivalent. Prepared material will be issued from shop. with factor 0.97 (PS82)C) Machining of OIL RING-II from P355NH-Plate 25 x D240 to Drg.No. 45521401778(1.1 Kg/No.) or equivalent. Prepared material will be issued from shop. with factor 0.79 (PP20)
287	Category:-LMEX - RS Group :LMEX01( TO QUOTE FOR ALL RS IN THIS GROUP)
288	Material removal u/operation done using Lathe by OD Turning (If example if Rod dia 25 is substituted by Rod Dia 40 this rate is applicable for the difference in weight. I.e.. applicable for the portion of machining done EXTRA than originally planned for)
289	Material removal u/operation done using Lathe by ID Boring (applicable for the portion of machining done EXTRA than originally planned for)
290	Material removal u/operation done using Milling(applicable for the portion of machining done EXTRA than originally planned for)
291	Category:-NIT - RS Group :NIT001( TO QUOTE FOR ALL RS IN THIS GROUP)
292	A) CYLINDER NITRIDING 11 AND 12 Sizes- including Testing at approved lab Drg.No:- 1-55-214-00423 2-55-335-00746 or equivalent . Both way transport in BHEL scope with factor 1.00 (SN01)B) CYLINDER NITRIDING - 16 SIZE- including Testing at approved lab Drg.No:- 1-55-216-00439 1-55-216-00952 or equivalent . Both way transport in BHEL scope. with factor 1.00 (SN02)
293	Category:-REC - RS Group :REC001( TO QUOTE FOR ALL RS IN THIS GROUP)
294	Recovery Rate for Turnings and Borings scrap of CS/AS
295	Recovery Rate for Turnings and Borings Scrap of Stainless Steel- Magnetic
296	Recovery Rate for Turnings and Borings scrap of SS Non magnetic Non Ferrous
297	Category:-VTL - RS Group :VTL001( TO QUOTE FOR ALL RS IN THIS GROUP)
298	MACHINING OF ROTOR POST HEADER PLATE 3-52-011-02109 OR EQUIVALENT
299	MACHINING OF ROTOR POST HEADER PLATE 3-52-011-02365 OR EQUIVALENT
300	MACHINING OF ROTOR POST HEADER PLATE 3-52-011-02865 OR EQUIVALENT
301	MACHINING OF SUPPORT BEARING BASE PLATE OPSKAPH3085 OR EQUIVALENT
302	MACHINING OF SUPPORT BEARING RUNNER PLATE OPSKAPH2857 OR EQUIVALENT
303	Category:-VTL - RS Group :VTL002( TO QUOTE FOR ALL RS IN THIS GROUP)
304	IMPELLER HUB MACHINING/VTL AS PER SCOPE SHEET FOR THE DRG 0-55-216-01745, 0-55-216-02062, 0-55-335-2040 AND 0-55-335-1953 OR EQUIVALENT. FABRICATION COMPLETED IMPELLER HUB WITH MARKING FOR VTL OPERATION FOR THE WILL BE ISSUED FROM SHOP.
305	RADIAL IMPELLER MACHINING, AS PER DRG NO 1-56-173-03879, 2-56-171-01293, 1-56-171-00462 OR EQUIVALENT. FABRICATED, WELDED, SR COMPLETED JOB WILL BE ISSUED FROM SHOP.
306	Category:-WP - RS Group :WP001( TO QUOTE FOR ALL RS IN THIS GROUP)
307	WEAR PLATE DRILLING, Counter sink and slotting . Prepared material will be issued from shop
308	Category:-WESP - RS Group :WESP01( TO QUOTE FOR ALL RS IN THIS GROUP)
309	GENERAL GRINDING OF IMPELLER EDGE PREPERATION /SMOOTH GRINDING OF Guide vanes BLADES AND WEAR PLATES Drg.No:- 0-55-126-00647
310	TOE GRINDING OF IMPELLER . Payment will be based on Lenth of grinding in Metres
311	A)IMPELLER AND FAN PARTS welding for WSTE/P355NH material using With E7018 electrode is to be carried out with a fillet throat size upto 8 mm For increased fillet throat sizes, the following factors are to be applied over IW01:B)For throat size 9–10 mm (IW02), apply a factor of 1.2C)For throat size 11–12 mm (IW03), apply a factor of 1.4D)For throat size 13–14 mm (IW04), apply a factor of 1.8E)For throat size 15–16 mm (IW05), apply a factor of 2.0All welding is to be done as per the specified drawing, and MR is the applicable unit of measurement.
312	A) IMPELLER AND FAN PARTS welding for Naxtra material using With E11018 electrode is to be carried out with a fillet throat size up to 8 mm as per drawing number 0-56-134-00957, 0-56-134-00960 or equivalentFor increased fillet throat sizes, the following factors are to be applied over IN01:B)For throat size 9–10 mm (IN02), apply a factor of 1.2C)For throat size 11–12 mm (IN03), apply a factor of 1.4D)For throat size 13–14 mm (IN04), apply a factor of 1.8E)For throat size 15–16 mm (IN05), apply a factor of 2.0All welding is to be done as per the specified drawing, and MR is the applicable unit of measurement.
313	Category:-WESP - RS Group :WESP02( TO QUOTE FOR ALL RS IN THIS GROUP)
314	RADIAL IMPELLER FABRICATION AND WELDING (SAF) AS PER SCOPE SHEET FOR THE DRG NO 1-56-173-03879, 2-56-171-01293, 1-56-171-00462 OR EQUIVALENT. PREPARED MATERIAL BACK PLATE, BLADE AND COVER PLATE WILL BE ISSUED FROM SHOP.
315	Category:-WESP - RS Group :WESP03( TO QUOTE FOR ALL RS IN THIS GROUP)
316	A) Fabrication with pre MPI, and post MPI, Machining pre-grinding of Piston assy of 12S ) . ID /OD cut matl. for piston flange and piston rod to be collected from shop. (Chrome Plating and Post Grinding NOT in scope). B) 16S PISTON WILL BE LOADED WTIH 1.45 FACTOR
317	Category:-WESP - RS Group :WESP04( TO QUOTE FOR ALL RS IN THIS GROUP)
318	HYDRAULIC SUPPORT CONE FABRICATION AND WELDING (FD/PA) AS PER SCOPE SHEET FOR THE DRG NO 1-55-216-02162, 1-55-335-02397 OR EQUIVALENT. PREPARED RAW MATERIAL FLANGE I, FLANGE II AND CONE SHELL WILL BE ISSUED FROM SHOP. (Welding will be inspected by UT)
319	HYDRAULIC SUPPORT CONE FABRICATION AND WELDING (ID) AS PER SCOPE SHEET FOR THE DRG NO 1-55-328-02389 OR EQUIVALENT. PREPARED MATERIAL FLANGE I, FLANGE II AND CONE SHELL WILL BE ISSUED FROM SHOP. (Welding will be inspected by UT)
320	Category:-WESP - RS Group :WESP05( TO QUOTE FOR ALL RS IN THIS GROUP)
321	WELDING HUB MACHINING (ITEM NO 01) AND LOAD DISC MACHINING (ITEM NO 02), FABRICATION AND WELDING OF ITEM NO 01 & ITEM NO 02 AS PER DRG 0-55-216-01745, 0-55-216-02062, 0-55-335-02040 AND 0-55-335-1953 OR EQUIVALENT. WELDING SHOULD BE ULTRASONICALLY TESTED AND CLEARED. OD/ID RAW MATERIAL WILL BE ISSUED FROM SHOP FOR BOTH THE ITEMs (WELDING HUB AND LOAD DISC).
322	Fabrication and Welding of (ITEM NO 01 ) Machined WELDING HUB AND (ITEM NO 02) Machined LOAD DISC. (Item no -01) Welding hub drg no-3-55-216-02467 OR 3-55-335-02734 OR EQUIVALENT AND (ITEM NO 02) Load Disc Drg no-4-55-216-03334 OR 4-55-335-03648 OR EQUIVALENT. REFER ITEM NO 01 & 02 AS PER DRG 0-55-216-01745, 0-55-216-02062, 0-55-335-02040 AND 0-55-335-1953 OR EQUIVALENT FOR WELDING DETAIL . WELDING SHOULD BE ULTRASONICALLY TESTED AND CLEARED. BOTH THE ITEMS (WELDING HUB-FORGING AND LOAD DISC WILL BE ISSUED FROM SHOP in MACHINED CONDITION Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents
9	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tamil Nadu Tenders

Machinery and Tools Tenders

Manufacturing Machinery Tenders

Food Processing Machinery Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Supply Of Loose Dus And Part Processing (Ldpp) Contract (Period 2026-2028), Ranipet-Tamil Nadu

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Supply Of Loose Dus And Part Processing (Ldpp) Contract (Period 2026-2028), Ranipet-Tamil Nadu

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us