|
| 1 | Construction Building |
| 2 | stair cess(G.F.+F.F.+S.F.(Mumty) |
| 3 | Internal electrification @ 12.50% |
| 4 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 2023.13.91 |
| 5 | 12 mm thick plaster with cement & fine sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not be less than 1 cm including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. DSR 2023.13.1.1 |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. with approved quality material of Berger/J.K./ Birla or similar. DSR 2023.13.80 |
| 7 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's New work (two or more coats) over and including water thinnable priming coat with cement primer of approved brand and & manufacture such as Berger, Shalimar, J&N including cleaning, brushing the surface free from mortar, dropsincluding all cost of materials,labour cess, labour T&P etc. required for proper completion of work. DSR 2023.13.41.1 |
| 8 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqmincluding all cost of materials,labour cess, labour T&P etc. required for proper completion of work. DSR 2023.13.48.1 |
| 9 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Twoor more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture of approved brand and manufacture of approved superior quality readymix paint including supply of all material labour, labour cess T&P etc. required for proper completion of work paint to be used should confirem the ISI No. 103-1950 . DSR 2023.13.48.3 |
| 10 | Painting wood work with Deluxe Multi Surface Paint to give an even shade. Twoor more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture of approved brand and manufacture of approved superior quality readymix paint including supply of all material labour, labour cess T&P etc. required for proper completion of work paint to be used should confirem the ISI No. 103-1950 . DSR 2023.13.48.2 |
| 11 | Dismantling tile work For thickness of tiles 10 mm to 25 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead. including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.DSR 2023.15.23.1 |
| 12 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth .including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.DSR 2023.6.2.1 |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 2023.8.31 |
| 14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete. DSR 2023.11.37 |
| 15 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.DSR 2023.4.1.3 |
| 16 | Providing and fixing ISI marked 35 mm thick flush door shutter conforming to IS:2202 (Part I) non-decorative type including ISI marked Stainless Steel butt hinges with necessary screws, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : And also including supply of all material labour, T & P, labour cess, sundries & all taxes complete etc. required proper completion of the work.DSR 2023. 9.21.1 |
| 17 | Providing and fixing 250x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete : DSR 2023.9.96.2 |
| 18 | Providing and fixing 200 x 10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 2023.9.97.3 |
| 19 | Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : DSR 2023.9.100.1 |
| 20 | Providing and fixing Twin rubber stoppe aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.: DSR 2023.9.101.2 |
| 21 | Providing & fixing 4 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with including supply of all material labour, labour cess T&P etc. required for proper completion of work. DSR 2023.10.30.1 |
| 22 | Providing and laying Size of Tile 600x600 mm vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete.including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.DSR 2023.11.41.2 |
| 23 | Providing and fixing 25 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. as per direction of Engineer in Chargeand including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work.DSR.18.9.3 |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work..DSR 2021 18.48 |
| 25 | Providing and fixing Semi rigid pipe 40 mm P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work. DSR 2023 17.28.1.2 |
| 26 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work.20 mm nominal bore, 120 mm long, weighing not less than 198 gms. DSR 2023 18.62.2 |
| 27 | Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work. DSR 2023 17.1.1 |
| 28 | Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work. DSR 2021 17.7.1 |
| 29 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work.DSR 2021. 17.8 |
| 30 | Providing and fixing 15 mm nominal bore C.P.brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. brass bib cock of approved quality conforming to IS:8931 and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work. DSR 2023. 18.50.1 |
| 31 | Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work. DSR 2023. 18.53.1 |
| 32 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work.DSR 2023 17.31 |
| 33 | Providing and fixing on wall face 110 mm diameterunplasticised Rigid PVC conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work.DSR 2023 12.41.2 |
| 34 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations:Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.Providing and laying four courses water proofing treatment with bitume |
| 35 | Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR 2023.15.7.4 |
| 36 | Add 1% for Contingency |
| 37 | Add 1% Labour cess |
| 38 | Add 1.5% Depreciation value fund |
| 39 | Add 12.5% for internal Electrification in Existing Building Please Enable Macros to View BoQ information |
