|
| 1 | Taking down chowkats or frame with shutters (without taking off shutters from the frames ) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed. |
| 2 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm eachcomplete all as specified and directed. |
| 3 | Taking down of shutter but exceeding 1sqm but not exceeding 2Sqm each all as complete all as specified and directed. |
| 4 | Refixing in other opeinging shutters of any description exceeding 2 Sqm each complete all as specified and directed. |
| 5 | Refixing in Same opeinging shutters of any description exe 2 Sqm each all as specified and directed. |
| 6 | S&F 125mmX60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet including door stopper complete all as specified and directed. |
| 7 | S&F 105mmX60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed. |
| 8 | M&L for PCC (1:2:4), type B0 (using 12.5 mm graded crushed stone aggregate) as in bed blocks for fixing hold fast, lugs, filling hollow spaces of pressed steel door frame etc including weathering slightly rounded for chamfered angles and throating and form work complete all as specified and directed. |
| 9 | S&F wall ties, hold fasts hooks for hanging fans, boarding, wind tie,purlins etc and similar small articles conforming to Fe.290, Gde-E-165 complete all as specified and as directed. |
| 10 | S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 11 | M&L 35 mm thick 2nd class H/W Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 12 | M&L Mild Steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 13 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 14 | S&F 300 mm long Aluminium anodized sliding door bolt with haps and staple (bolt type) and fixing clips of sheet, cast and extruded section and fixing bolts and sliding bolts of extruded section and cast aluminium alloy complete all as specified and as directed. |
| 15 | S&F 150 mm long Aluminium anodised barrel tower bolt extruded section (Conforming to IS) complete all as specified and directed. |
| 16 | M&L for two coats of synthetic enamel paint over a coat of pink primer of new wooden surface of any description, not other wise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 17 | M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 18 | S&F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed. |
| 19 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 20 | S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed. |
| 21 | S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed. |
| 22 | S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed. |
| 23 | Taking down cement plaster of any description from brick/ stone wall surfaces including racking out joints, hacking for key, scrubbing down with water etc. and removing debris to a distance n.exc. 50 m complete all as specified and as directed. |
| 24 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement all as specified and as directed. |
| 25 | M&L for newly platered surfaces of internal walls and applying two coat of oil emulsion paint (interior grade) overa a coat of primer, complete all as specified and as directed. |
| 26 | M&L for applying wall putty of 1mm thick interior/exterior on wall surfaces finished smooth and even complete all as specified and directed. |
| 27 | Dismantling of floor hearth and wall tilling incl mortar beding and throw rubbish out the premises as directed by the Engr-in-Charge. |
| 28 | M&L for Non skid ceramic white tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 29 | M&L for Non skid ceramic white tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry complete all as specified and directed. |
| 30 | M&L for glazed coloured designer ceramic tiles of size 300mmX450mm &7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 31 | M&L 10 mm thick Screed in cement mortar (1:4) as backing layer to finish rough surface a complete all as specified and directed. |
| 32 | M&L for plain cement concrete (1:3:6), type C2 (using 40mm graded crushed stone aggregate) as in foundations,filling and mass concrete ,complete all as specified and directed. |
| 33 | M&L for Hardcore of gauge of broken stone or boulders not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 34 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and as directed. |
| 35 | Demolition of boarding of any description and in any position complete all as specified and directed. |
| 36 | S&F prelaminated particle board of 18/19 mm thick oneside decorative face of exterior grade including teal beading as in wardrobe and cup board shutters and shelves etc. complete all as specified and directed. |
| 37 | S&F 30mm width of flaps of continuous Piano hinges mild steel bright finish or electrogalvanised complete all as specified and directed. |
| 38 | S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed. |
| 39 | S&F 150mm extruded Aluminium alloy handle complete all as specified and directed. |
| 40 | Dismantling Asbestos cement(corrugated,semicorrugated,etc) sheets in roof covering complete all as specified and directed. |
| 41 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, includingNainital or similar pattern roof (corrugated,semicorrugated,etc) sheets in roof covering complete all as specified and directed. |
| 42 | S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 43 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 44 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) Quality 'A' including fabrication, erraction and fixing complete all as specified and directed. |
| 45 | S&F powder coated anodised aluminium door, window , ventilator frame including shutter etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size with power coating any colour minimum thickness 50 micron including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws etc including taking down complete all as specified as per manufacturers instructions.Note: Glass Pane and EPDM Rubber beading/gasket shall be measured and paid for seperatley. |
| 46 | S&F powder coated any colour minimum thickness 50 micron anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 47 | S&F powder coated any colour minimum thickness 50 micron anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 48 | S&F 18mm Fibre insulation boards, ordinary type,. and fixed to timber frame work with nails complete all as specified and directed. |
| 49 | S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed. |
| 50 | S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 51 | S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 52 | S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 53 | S&F 125mm Extruded aluminium alloy handle complete all as specified and directed. |
| 54 | S&F Butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed. |
| 55 | S&F 4 lever aluminium mortice lock, vertical type size 100 mm complete all as specified and directed. |
| 56 | S&F hydraulically regulated extruded aluminium body door closer designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed. |
| 57 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; ailings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 58 | S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified and directed. |
| 59 | Dismantling of Steel rolling shutters of any size including all accessories complete all as specified and directed. |
| 60 | S&F 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but Mechanical operated type with bevel gear box and crank handle complete all as specified and directed.Note:- Height of rolling shutter is upto 5 RM and width is upto 6 RM. |
| 61 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 62 | S&F Ball bearing for rolling shutters complete all as specified and directed. |
| 63 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Please Enable Macros to View BoQ information |
