|
| 1 | WORK NAME |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 3 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.50 mm thickness |
| 5 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width |
| 6 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 7 | Providing and Fixing Roller Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & tilting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) |
| 8 | Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with tilting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) |
| 9 | Providing and fixing False Ceiling Tiles of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main \\"T\\" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross \\"T\\" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main \\"T\\" at 600mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200m center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. (The rate is excluding cost of tiles which will be paid separately ). |
| 10 | Providing and fixing aluminium composite panel 5 mm thick by using 0.5 mm thick aluminium foil and 5 mm thick reflactive glass (sand bobbin ASHI India or equivalent) and framing of 2 mm thick aluminium section of 50 x 50 mm size silicon & glazing tap etc. complete up to IIIrd floor, pattern as approved by engineer in charge. PWD BSR 2013 |
| 11 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick, Float glass :5 mm thick |
| 12 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehyde resin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A' : 30 mm thick, Decorative teak veneer both side |
| 13 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. |
| 14 | Providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture as per direction of Engineer-in-charge of size 595 X 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.33 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X32mm made out of 0.33mm (Minimum) sheet, spaced at 600mm centre to centre to form a grid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24X32mm made out of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edged calcium silicate ceiling tiles of approved texture in the grid including cutting /making opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using 50 mm long M 6 dash fasteners, 6mm G.I. fully threaded rods with galvanised steel L cleat level adjusters of size 80x25x2mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawing and as directed by engineer-in-charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs)having area less than 0.30 Sqm. The calcium silicate ceiling tiles shall have NRC. Value 0.50 (Minimum), light reflection> 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <= 0.043 w/m0KC. |
| 15 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. |
| 16 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, screws etc. to suit shutter thickness complete. |
| 17 | Providing & Supplying of Officer Chair in Officer Rooms at Municipal Corporation Kota. Desgin/drawing & Specification of direction engineer in charge. Non SOR Item |
| 18 | Providing and Supplying of Glass Door Almirah in Rajeev Gandhi Prashasnik Bhavan of Municipal Corporation Kota. Glass Door Almirah as per following Technical Specification :- (1) Over Silde :- (3-0”X1-6”X6-6) including leg height of 5” inches.(2) Materail :- CRCA Steel, 0.9+0.1mm thick sheet as per IS-5131994, Steel Sheet shall be oven baked epoxy polyster powder coated with 40-50 dry film thickness.(3) Configuration :- 5 Sheleves with floor glass door designed and proper sealing against dust and insects.(4) Construction :- It should have multi bend construction with interlocking desgin and full length over lapping door and side. It should have three way bolting mechanism. Two door should have hinge mounted on frame.(5) Glass Doors :- Thickness 3m+0.1 with six level lock and chrome plated “cg hand;e on door.(6) Colour :- Olive Green OR Prince Grey.Providing and Supplying of Glass Door Almirah in Rajeev Gandhi Prashasnik Bhavan of Municipal Corporation Kota. Glass Door Almirah as per following Technical Specification :- (1) Over Silde :- (3-0”X1-6”X6-6) including leg height of 5” inches.(2) Materail :- CRCA Steel, 0.9+0.1mm thick sheet as per IS-5131994, Steel Sheet shall be oven baked epoxy polyster powder coated with 40-50 dry film thickness.(3) Configuration :- 5 Sheleves with floor glass door designed and proper sealing against dust and insects.(4) Construction :- It should have multi bend construction with interlocking desgin and full length over lapping door and side. It should have three way bolting mechanism. Two door should have hinge mounted on frame.(5) Glass Doors :- Thickness 3m+0.1 with six level lock and chrome plated “cg hand;e on door.(6) Colour :- Olive Green OR Prince Grey.Non SOR Item |
| 19 | Providing wooden table for RECEPTION COUNTERS/officers chambers of approved design with 19mm solid core board ISI marked water proof and 1mm thick mica at top and inside, Front having combination pattern with metalic laminate as per design and drawing of Architect as per design and drawing approved by Engineer in charge table with 8' length 2' width and 2'6\\" height as per design of Architect (Counter top area to be measured for payment) Non SOR Item |
| 20 | Providing Sofa for Artium and visitors room of Officers Room and made out of Wooden frame with tapastic cloth seats 6\\" thick and back 2\\" thick 50mm density foam high quality as per direction of engineer in charge. Non SOR Item |
| 21 | Providing & Supplying of Hot and Cold Dispencher in Officer Rooms at Municipal Corporation Kota. Desgin/drawing & Specification of direction engineer in charge. Non SOR Item Please Enable Macros to View BoQ information |
