|
| 1 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 2 | a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 3 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 4 | a) 250x16 mm |
| 5 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 6 | a) 250x10 mm |
| 7 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 8 | a) 125 mm |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 11 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 12 | (i)Single socketed pipes. |
| 13 | a) 75 mm diameter |
| 14 | b) 110 mm diameter |
| 15 | 12 mm cement plaster of mix : |
| 16 | a) 1:6 (1 cement: 6 fine sand) |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 18 | a) Two or more coats on new work. |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 20 | a) One or more coats on old work. |
| 21 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 22 | a) Old work (Two or more coats) |
| 23 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 25 | a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 26 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 27 | a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 28 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 29 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 30 | a) For thickness of tiles 10 mm to 25 mm |
| 31 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 32 | a) Circular shape 450 mm dia. |
| 33 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 34 | a) Orissa pattern W.C. pan of size 580x440 mm |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 36 | a) 20 mm nominal outer dia .Pipes. |
| 37 | b) 25 mm nominal outer dia .Pipes. |
| 38 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 39 | (i) 45 cm length |
| 40 | a) 15 mm nominal bore |
| 41 | Grading roof for water proofing treatment with |
| 42 | a) Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 44 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 12 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with Vertical bamboo&horizontal bamboo, placed 1.5 metre centre to centre, challis, in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of civil repair works . The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in- charge. (The payment will be made once only for execution of all items for such works). |
| 45 | Cleaning of Manhole with connecting sewer line and disposal of malva out side compound etc all complete as per direction of E-in-C. |
| 46 | Cleaning and de-silting of Septic Tank Chamber by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and de-silting and disposal of malba , all complete as per the direction of Engineer-in-charge. |
| 47 | Providing and laying water proofing treatment in Terrace portion, with polymer modified cementitious coating all complete as per direction of E-in-C |
| 48 | Raking out joints in cement mortar and preparing the surface for filling of open joints with cement slurry in brick tile of terrace for water proofing treatment including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
| 49 | Credit to agency unusable/unserviceable items |
| 50 | a) CP Brass items |
| 51 | b) Flush door shutters |
| 52 | c) GI pipes |
| 53 | d) CI Pipes Please Enable Macros to View BoQ information |
