|
| 1 | Dismantling of reinforced cement concrete or reinforcement brick work, including stacking of materials as directed by engg. i/c. within a distance of 60mtr. |
| 2 | Dismantling of cement concrete or brick or granolithic floors including base concrete and including stacking of materials as directed by engg. i/c. within a distance of 60mtr. |
| 3 | Dismantling of brick work or stone work in lime or cement mortar and including stacking of materials as directed by engg. i/c. within a distance of 60mtr. |
| 4 | Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5 m in width as well 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m ,as directed by engg-in-charge:2.1.1 All kinds of soil. |
| 5 | Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering - All work up to the plinth level in 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size |
| 6 | Reinforced cement concrete work in beam, suspended floors, roofs having slope up to 15\\" landing, bolconies, shelves, chajjas, lintels , bands, plain, window sills, stair cases and spiral stair cases above plinth up to floor five, level excluding the cost of centering, shuttering, finishing and reinforcemen, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded). |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all completeupto plinth level. Thermo mechanically treated bars of grade Fe-500D or more. |
| 8 | Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Brick work with common burnt clay (non modular) bricks of class-150 in super structure above plinth level up to floor V level in all shapes and sizes cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) |
| 11 | 15mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement : 4 find sand) |
| 12 | S/F of 5mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement, c-sand mortar finished with white slurry jointing and polishing etc all complete. |
| 13 | Steel work welded in built up sectiores froomed work including cutting hoisting, fixing in position cand splving a priming coat of approved steel primer wing structural steel ete as required n gratings, fromes, guard bur, lukder, rollings brackets, gotes and similar works |
| 14 | Providing and fixing water closet squatting pan Indian type IWC pan) with 100mm sared cast from Por 5 trap. 10 litre low 100 level white PVC thuching cistern, incinding fluch pipe, with mamally controlled device (handle lever) conforming to 15.7231, with all fittings and fixtures complete. Including cutting and making good the walls and floors wherever required White Vitreous china Orissa partem WC pan of size 580x440 mm with Integral type foot rests |
| 15 | Providing and fixing vitreous china chaal purpose closet suitable for use as sputting pan or European type water closer (Anglo Indian WC pan) with seat & lid fixed with CF. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend |
| 16 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic, flushing cistern with fittings, standard size C.P. brass flush pipe, spreaders with uinions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, CL trap with outlet grating and other couplings in C.P. brass including painting of fitting and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 llitre PVC automatic flushing cistern |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm CP. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mum C.P. brass pillar tap |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, Including all CPVC plain & brass threaded fittings, Ve fixing the pipe with clamps at 1.00 mm spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walis ete 15 mm nominal outer dia Pipes |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, Including all CPVC plain brass threaded fittings, Ve fixing the pipe with clamps at 1.00 mm spacing. This includes Jointing of pipex & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Eregincer in Charge Concealed work, including cutting chases and making good the walls etc 32 mm nominal nater dia Pipes |
| 20 | Providing and fixing brass bib cock of approved quality:15 mm nominal bore |
| 21 | Brass stop cock heavy iquality 400grm. Gem Mikadeo/Encess's Williams) 15mm dia etc all complete |
| 22 | PVCwaste pipe for W.H.B. Sink 32 mm. |
| 23 | SS Jali 100x100 mm |
| 24 | Construction of manhole chamber of 0.60x0.60x0.90m internal size with b/w, plaster, cover. C.1. sheet, labour T&P etc required for proper completion of work |
| 25 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size) |
| 26 | Providing and fixing, ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and Jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work |
| 28 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work for two coat. |
| 29 | Painting Ist coat over petiming cout that exchuding cost of priming cont) on steel and other metol surfaces upto Wem width or girth or small articles not exceeding 0.10 Sq. M. In area with superior synthetic enamel such as Lausul 3, I gloss Apcolite. Superlac, Dulux specified brushing to give and even shade and including the cleaming the surface of all dirt, shirt and other foreign mustier sand papering and scrapping incheding cost of all materials. labour, tools and plants etc required for proper completion of work Extra over item 2 and 2(a) above but for every coat of paint after first coat |
| 30 | Supply and fixing of anodized aluminium partition having 2mm thick aluminium. Section, partly glazed and partly 12mm thick laminated board. Aluminium board size 83.5tbx44.65mm as vertical member and 11.4thx 44.45 as bottom and horizontal member with all fitting, glass panes of 4mm thick handle and looks complete. |
| 31 | Supply and fixing of 10cm. Internal dia AC down pipes complete with roseheads, bends MS. clamps 2.5cm x 3mm. Fixed to wall by 15cm. Long 6mm dia noils and including repairs of plaster pointing etc. if damaged during fixing, of the pipes including cost of all materials, labours, tools and plant etc, required for proper completion of work |
| 32 | Sale of material of old bricks etc all complete |
| 33 | Sale of material of old brick bats etc all complete |
| 34 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
