|
| 1 | Excavating, supplying and filling of local carth by mechanical transport up to a lead upto 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation clo, complete.of 5 km. (Excluding Cost of GST) |
| 2 | Providing, laying spreading & compacting of granular sub-base by providing well graded (Gr-1) materials, spreading in uniform layers with Motor Grader on prepared surface on prepared surface, mixing by mix in placed method witlı Rotovator at OMC and compacting with in layers with smooth wheeled Vibratory Roller to achieve the desired density, complete as per MORD clause 401.1 & as directed by Engineer Incharge including all machinery charges & including all labour, T&P ete required for proper completion of the work.(Excluding Cost of GST) |
| 3 | Providing and laying cement concrete in 1:5:10 (1 Cement: 5 Fine sand: 10 graded stone aggregate 40 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. In Foundation and Noors. Same as above 1:5:10 but in Coarse Sand but CH-5 SI.NO 2 PWD SP 274(A)(Excluding Cost of GST) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation-100 in foundation and plinth in:Cement mortar 1:6 (1 cement: 6 coarse sand) CH-6 SI.NO I PWD SP 6.1.1 (Excluding Cost of GST) |
| 5 | 12 inm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level CH-13 PWD SP 583 (11) 1:4 (1 cement: 4 Coarse sand) (Excluding Cost of GST) |
| 6 | Providing and laying D.P.C 25 mm thick with Cement concrete Consisting of 1:1.5:3 (1 Cement: 1.5 Course Sand: 3 approved 5.6 mm graded Stone grit) and including water proofing martreial us approved by the Engineer-In-Charge in the proportion as specified by manufacturer.CH-7 SI.NO I PWD SP 361 (A)(Excluding Cost of GST) |
| 7 | Laying of I shaped precast Interlocking tiles of thickness 60 10/mm (Compressive strength not less then 30Mpa and eight: 4.50Kg.) Including 25mm thick: local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work: (80MM RUBBER MOULDED)(Excluding Cost of GST) |
| 8 | Reinforced cement concrete work in walls (any thickness). including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers.abutments, posts and struts etc. including cost of centering, shuttering, finishing jand excluding reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) CH-5 SLNO 7 PWD SP 5.2.2 (i)(Excluding Cost of GST) |
| 9 | Steel reinforcement for R.C.C. Work: including straightening, cutting, bending, placing in position and binding zil complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Ch-10 SINO IDSR 5.22.6(Excluding Cost of GST) |
| 10 | construction of Podium with brick work and plaster 1:4 cement mortar for enogration with black granite stone 2ft x 2.5ft including graving of proper language in all respect(Excluding Cost of GST) Please Enable Macros to View BoQ information |
