Tender For Estimate Of Erection Of Ms Fence Fixing With cement concrete Coloumns Of Green Belt Along Sector-88 (Sector Side) Road Asset Id - 1046 , Fmda, Faridabad (Including Defect Liability -Cummaintenance Period For 730 Days)
Tender Value
1.46 Crore
Estimated cost
Bid Submission
06 Apr 2026
0 days left
EMD
2.93 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate Of Erection Of Ms Fence Fixing With cement concrete Coloumns Of Green Belt Along Sector-88 (Sector Side) Road Asset Id - 1046 , Fmda, Faridabad (Including Defect Liability -Cummaintenance Period For 730 Days)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Apr-2026 | Corrigendum for date extension | Date | 06-Apr-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | HSR Items |
| 2 | [11.69.2]Applying priming coats with primer of approvedbrand and manufacture, having low VOC (VolatileOrganic Compound ) content. 2. With water thinnablecement primer on wall surface having VOC content lessthan 50 grams/litre [Through Rate] |
| 3 | [11.78]Painting two coats excluding priming coat withsynthetic enamel paint in all shades on new wood work ormetallic or plastered or concrete surfaces to give an evenshade. [Through Rate] |
| 4 | [13.30.1]Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in position and applying a primingcoat of approved steel primer, including welding andbolted with special shaped washers etc. complete. 1. Hotfinished welded type tubes [Through Rate] |
| 5 | [26.4.3]SITE CLEARANCE 3. clearing jungle manuallyincluding uprooting rank vegetation , grass, woody vegetation up to 30cm girth measured at height 1 m above ground level and removal of rubbish up to a distance of 50 m out side the periphery of the area cleared [Through Rate] |
| 6 | [3.1.18]By Mechanical Transport including loading,unloading and stacking 18. Disposal of moorum/buildingrubbish/ malba/ similar unserviceable, dismantled or wastematerial by mechanical transport including loading,transporting, unloading to approved municipal dumpingground for lead up to 10 km for all lifts, complete as perdirections of Engineer-in-charge. [Rate] |
| 7 | [4.12.1]Earth work in excavation by mechanical means(Hydraulic excavator)/manual means over areas (exceeding30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth leadup to 50 m and lift up to 1.5 m, as directed by Engineer-incharge.1. All kinds of soil [Through Rate] |
| 8 | [6.1.1]Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work below plinth level and up to Floor IVlevel: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3graded stone aggregate 20 mm nominal size) [ThroughRate] |
| 9 | [6.1.5]Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work below plinth level and up to Floor IVlevel: 5. 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6graded stone aggregate 40 mm nominal size) [ThroughRate] |
| 10 | [6.29.2]Centering and shuttering including strutting,propping etc. and removal of form work for : 2. Retainingwalls, return walls, walls (any thickness) includingattached pilasters, buttresses, plinth and string coursesfillets, kerbs and steps etc. [Through Rate] |
| 11 | [6.33.6]Steel reinforcement for R.C.C. work, where notincluded in the complete rate of RCC, includingstraightening, cutting, bending, placing in position,binding, wastage, overlaps, welded joints, spacer bars,chairs, stays, hangers and annealed steel wire etc. completein all respect below plinth level Note: Reinforcement shallbe measured in length including hooks, if any, separatelyfor different diameters as actually used in work , excludingoverlaps. Wastage, overlaps, couplings, welded joints,spacer bars, chairs, stays, hangers and annealed steel wireor other methods of binding & placing shall not bemeasured and cost of these items shall be deemed to beincluded in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more[Through Rate] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Apr 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender