Tender For Extending 11 Kv Line Using Ht Abc And Installing Dtr At Paissai Seminary Area To Meet Load Growth, Irikkur-Kerala

TDR : 54776304

Tender Notice
BOQ

13 Days Left

Irikkur , Kerala

Tender Brief : Tender For Extending 11 Kv Line Using Ht Abc And Installing Dtr At Paissai Seminary Area To Meet Load Growth

Document Fees
₹ 2006 /-

EMD
₹ 20900.0 /-

Tender Value
₹ 8.35 Lakhs /-

Submission Date
04-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
2	Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.
3	Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole including digging and back filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
4	Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.
5	Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.
6	Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
7	Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles
8	Erection of Anchor clamp / dead end clamp for 11kV ABC of any size
9	Erection of suspension clamp for 11KV ABC of any size
10	Providing Cable Tie
11	Fiting One No MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable
12	Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm and connecting to existing MVT or other terminals,using the cable end termination kit supplied departmentally including charges for cable jointer etc. complete as per the direction of the departmental officers.
13	Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.
14	Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.
15	Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling.
16	Additional rate for excavation of one Pit for Coil Earthing in Laterite
17	Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).
18	Erecting HT A-Type pole as support pole for ABC stringing work -New
19	Insertion of one HT A type pole in existing OH line including digging & backfilling pit in ordinary soil, fitting cross arm, insulators, binding etc., drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
20	Additional rate for reinstalling LT line on the renewed 11kV pole having both HT and LT (HT/LT) lines.
21	Transferring LT three phase 4/5 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.
22	Fitting one LT 2 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.
23	Fitting one LT 4 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.
24	Providing concrete muffing of size 0.45x0. 45x1.5m (0.5m above GL and 1m below GL). Excavation 0.45x0.45x1m, concrete (1:3:6, 20mm) 0.45x0.45x1.5m, Plastering (1:3) 12mm 0.45x0.45mx5sides.
25	Additional rate for refitting/redoing one Shackle Set, including reshacling one span, while renewing any type of LT pole.
26	Transferring LT single phase 2/3 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.
27	Erecting 9m PSC pole as support pole for ABC stringing work-New
28	Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
29	Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
30	Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
31	Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
32	Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
33	Additional rate for excavation of Pit for A type pole in Laterite.
34	Additional rate for excavation of Pit for A type pole in Hard Laterite.
35	Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil.
36	Labour charges for loading LT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
37	Erecting one LT PSC Pole in position including digging & back filling pit in ordinary soil.
38	Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.
39	Additional rate for excavation of one Pit for LT Pole/LT Stay in Hard Laterite.
40	Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
41	Providing Strut using LT PSC pole including digging and back filling pit in ordinary soil.
42	Insertion of one HT PSC pole in existing HT/LT line including digging & back filling of pit in ordinary soil, fitting cross arm, insulator, binding etc. , drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
43	Pole numbering using printed Aluminium sheets of 22 SWG having size 20 x 12 cm or Painting the surface of line supports where numbers are to be inscribed, Pole numbers shall be painted in circular / rectangular background, using approved quality anti algal yellow paint in two coat after scraping and cleaning the surface at a height of 2.5 metre above ground level. The number and letters should be in black synthetic enamel paint. The size of the number should be at least 2cm in height x 1.5cm in width. including cost of paint.
44	Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.
45	Drilling hole of various sizes on existing Channel/Cross Arm.
46	Fitting and erecting one HT Double Pole Structure using A type pole in position including fitting 2 No. channel cross arm, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).
47	Fitting one Additional 2.4/3m Channel cross arm (75x40x6mm), in existing 11kV DP including conveyance of materials.
48	Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole.
49	Fitting one Additional V cross arm in existing single pole including conveyance of materials.
50	Additional rate for providing one HT Pin with insulator, complete on any type of HT pole.
51	Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.
52	Fitting 5 channel cross arms, AB switch, DO fuse, LA(Ord), HT & LT connections upto OH lines, etc. on existing DP structure, Fixing distribution box/provision for one set (3No.) of LT fuses, , drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing & mounting of Transformer on poles.
53	Erection of LT 3 way distribution box (normal size 160x40x90cm) on existing cross arm, giving connection including cable and earth connection (excluding earthing).
54	Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt & nut etc.
55	Installation of Pre-insulated lugs for 70sqmm
56	Installation of Pre-insulated lugs for 50sqmm
57	Installation of Pre-insulated lugs for 16sqmm
58	Erecting one 100kVA Transformer to existing DP and giving connections, including loading from TMR/SRS/other stacking place & unloading at site but excluding cost for transporting transformer.
59	Transporting Transformers by hired vehicle to a distance upto 5km and carrying upto 2 numbers of 63/100/160/250kVA Transformers / Ring Main Units excluding loading& unloading charges.
60	Providing Transformer fencing to a height of 1.8 m above ground level using MS Angle frames of size ISA 50x50x6mm for outer frame, 2 runs of 40 x 6 MS flat for horizondal brasing and grills with MS rods 8 mm Dia @ 10cm c/c for verticals, providing gate with locking arrangements, providing danger board & name board, embeding the legs in cement concrete 1:2:4, footing of size 30cmx30cmx50cm, painting with synthetic enamel paint two coats over one coat of iron primer etc complete, incl cost of transportation
61	Cleaning and levelling of transformer yard/RMU, spreading 40 mm broken stone in yard for a thickness of 10 cm above bed of 10 cm thick 6 mm broken stone, after constructing a curb wall of height 20cm above ground and 10cm below level including cost of all materials and charges for conveying, spreading, consolidating etc.
62	Installing one DTR Meter with box (normal size 40x25x100cm) on existing poles including fixing of 3 CTs on bus bar, laying and termination of control cable using proper lugs, fixing of meters, capacitors, control fuses and giving the complete connections including conveyance of materials.
63	Errection and commissining of street light metering with timer
64	Insertion of one LT PSC pole in existing three phase OH line including digging & back filling pit in ordinary soil, fitting cross arm, insulator, binding etc. excluding transportation of poles.
65	Insertion of one LT PSC pole in existing single phase OH line including digging & back filling pit in ordinary soil, fitting cross arm, insulator, binding etc. excluding transportation of poles.
66	Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm
67	Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane
68	Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
69	Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles
70	Erection of Anchor clamp / dead end clamp for LT ABC of any size
71	Erection of suspension clamp for LT ABC of any size
72	Providing End Caps
73	Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm
74	Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size
75	Dismantling (without damage) one km LT single phase 2 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
76	Providing Stay for LT poles including digging & back filling pit in ordinary soil.
77	Providing Fly stay for LT pole using LT PSC pole including digging and back filling pit in ordinary soil. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Kerala Tenders

Power Generation and Transmission Tenders

Power Transmission Tenders

Transmission Line Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Extending 11 Kv Line Using Ht Abc And Installing Dtr At Paissai Seminary Area To Meet Load Growth, Irikkur-Kerala

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
2	Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.
3	Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole including digging and back filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
4	Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.
5	Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.
6	Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
7	Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles
8	Erection of Anchor clamp / dead end clamp for 11kV ABC of any size
9	Erection of suspension clamp for 11KV ABC of any size
10	Providing Cable Tie
11	Fiting One No MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable
12	Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm and connecting to existing MVT or other terminals,using the cable end termination kit supplied departmentally including charges for cable jointer etc. complete as per the direction of the departmental officers.
13	Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.
14	Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.
15	Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling.
16	Additional rate for excavation of one Pit for Coil Earthing in Laterite
17	Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).
18	Erecting HT A-Type pole as support pole for ABC stringing work -New
19	Insertion of one HT A type pole in existing OH line including digging & backfilling pit in ordinary soil, fitting cross arm, insulators, binding etc., drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
20	Additional rate for reinstalling LT line on the renewed 11kV pole having both HT and LT (HT/LT) lines.
21	Transferring LT three phase 4/5 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.
22	Fitting one LT 2 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.
23	Fitting one LT 4 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.
24	Providing concrete muffing of size 0.45x0. 45x1.5m (0.5m above GL and 1m below GL). Excavation 0.45x0.45x1m, concrete (1:3:6, 20mm) 0.45x0.45x1.5m, Plastering (1:3) 12mm 0.45x0.45mx5sides.
25	Additional rate for refitting/redoing one Shackle Set, including reshacling one span, while renewing any type of LT pole.
26	Transferring LT single phase 2/3 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.
27	Erecting 9m PSC pole as support pole for ABC stringing work-New
28	Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
29	Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
30	Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
31	Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
32	Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
33	Additional rate for excavation of Pit for A type pole in Laterite.
34	Additional rate for excavation of Pit for A type pole in Hard Laterite.
35	Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil.
36	Labour charges for loading LT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
37	Erecting one LT PSC Pole in position including digging & back filling pit in ordinary soil.
38	Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.
39	Additional rate for excavation of one Pit for LT Pole/LT Stay in Hard Laterite.
40	Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
41	Providing Strut using LT PSC pole including digging and back filling pit in ordinary soil.
42	Insertion of one HT PSC pole in existing HT/LT line including digging & back filling of pit in ordinary soil, fitting cross arm, insulator, binding etc. , drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
43	Pole numbering using printed Aluminium sheets of 22 SWG having size 20 x 12 cm or Painting the surface of line supports where numbers are to be inscribed, Pole numbers shall be painted in circular / rectangular background, using approved quality anti algal yellow paint in two coat after scraping and cleaning the surface at a height of 2.5 metre above ground level. The number and letters should be in black synthetic enamel paint. The size of the number should be at least 2cm in height x 1.5cm in width. including cost of paint.
44	Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.
45	Drilling hole of various sizes on existing Channel/Cross Arm.
46	Fitting and erecting one HT Double Pole Structure using A type pole in position including fitting 2 No. channel cross arm, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).
47	Fitting one Additional 2.4/3m Channel cross arm (75x40x6mm), in existing 11kV DP including conveyance of materials.
48	Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole.
49	Fitting one Additional V cross arm in existing single pole including conveyance of materials.
50	Additional rate for providing one HT Pin with insulator, complete on any type of HT pole.
51	Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.
52	Fitting 5 channel cross arms, AB switch, DO fuse, LA(Ord), HT & LT connections upto OH lines, etc. on existing DP structure, Fixing distribution box/provision for one set (3No.) of LT fuses, , drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing & mounting of Transformer on poles.
53	Erection of LT 3 way distribution box (normal size 160x40x90cm) on existing cross arm, giving connection including cable and earth connection (excluding earthing).
54	Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt & nut etc.
55	Installation of Pre-insulated lugs for 70sqmm
56	Installation of Pre-insulated lugs for 50sqmm
57	Installation of Pre-insulated lugs for 16sqmm
58	Erecting one 100kVA Transformer to existing DP and giving connections, including loading from TMR/SRS/other stacking place & unloading at site but excluding cost for transporting transformer.
59	Transporting Transformers by hired vehicle to a distance upto 5km and carrying upto 2 numbers of 63/100/160/250kVA Transformers / Ring Main Units excluding loading& unloading charges.
60	Providing Transformer fencing to a height of 1.8 m above ground level using MS Angle frames of size ISA 50x50x6mm for outer frame, 2 runs of 40 x 6 MS flat for horizondal brasing and grills with MS rods 8 mm Dia @ 10cm c/c for verticals, providing gate with locking arrangements, providing danger board & name board, embeding the legs in cement concrete 1:2:4, footing of size 30cmx30cmx50cm, painting with synthetic enamel paint two coats over one coat of iron primer etc complete, incl cost of transportation
61	Cleaning and levelling of transformer yard/RMU, spreading 40 mm broken stone in yard for a thickness of 10 cm above bed of 10 cm thick 6 mm broken stone, after constructing a curb wall of height 20cm above ground and 10cm below level including cost of all materials and charges for conveying, spreading, consolidating etc.
62	Installing one DTR Meter with box (normal size 40x25x100cm) on existing poles including fixing of 3 CTs on bus bar, laying and termination of control cable using proper lugs, fixing of meters, capacitors, control fuses and giving the complete connections including conveyance of materials.
63	Errection and commissining of street light metering with timer
64	Insertion of one LT PSC pole in existing three phase OH line including digging & back filling pit in ordinary soil, fitting cross arm, insulator, binding etc. excluding transportation of poles.
65	Insertion of one LT PSC pole in existing single phase OH line including digging & back filling pit in ordinary soil, fitting cross arm, insulator, binding etc. excluding transportation of poles.
66	Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm
67	Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane
68	Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
69	Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles
70	Erection of Anchor clamp / dead end clamp for LT ABC of any size
71	Erection of suspension clamp for LT ABC of any size
72	Providing End Caps
73	Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm
74	Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size
75	Dismantling (without damage) one km LT single phase 2 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
76	Providing Stay for LT poles including digging & back filling pit in ordinary soil.
77	Providing Fly stay for LT pole using LT PSC pole including digging and back filling pit in ordinary soil. Please Enable Macros to View BoQ information

Tender For Extending 11 Kv Line Using Ht Abc And Installing Dtr At Paissai Seminary Area To Meet Load Growth, Irikkur-Kerala

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us