|
| 1 | Dismantling of reinforced cement concrete or reinforcement brick work, including stacking of materials as directed by engg. i/c. within a distance of 60mtr. |
| 2 | Dismantling of cement concrete or brick or granolithic floors including base concrete and including stacking of materials as directed by engg. i/c. within a |
| 3 | Scraping of old white or colour wash including refusal of dismantled material up to 60.0mtr distance as per direction by engg-in-charge. |
| 4 | Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in cement mortar 1:4 (1 cement: 4 |
| 5 | 12mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 6 | Reinforced cement concrete work in beam, suspended floors, roofs having slope up to 15\\" landing, bolconies, shelves, Steel reinforcement for R.C.C. |
| 7 | Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give |
| 8 | Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give |
| 9 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on |
| 10 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usinf structural steel etc as required in |
| 11 | Providing and laying in position sement concrete of specified rate 149(1 cement 4 coarse 1 1 6.10 sand (rone-graded stone aggregate 10 mm nominal se)(SOR-CH5-91-418) |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorbtion less than 0.08% and |
| 13 | Kota stone slab flooring over 20 mm (average) thick base laid aver and jointed with grey cement slurry mixed with pigment to match the shade of slab |
| 14 | White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. |
| 15 | Providing and fixing wash basin with C.I. Brakckets, 15mm C.P. 15 Brass pillar taps, 32mm C.P. Brass waste pipe of standard pattern, including painting of fittings and |
| 16 | Providing and fixing of Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water complete as per directed by Engg in-charge.25mm nominal outer |
| 17 | Providing and fixing of Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water directed by Engg-in-charge. 15mm nominal outer dia pipes |
| 18 | Supply & hoisting of sintex or equivalent high density polytheleneseamless of piece moulded tanks and placing the same in propee position including |
| 19 | Providing and fixing of brass bib cock of approved quality: 15mm nominal bore |
| 20 | Providing and fixing of C.P. brass stop cock (concealed) of approved quality: 15mm nominal bore |
| 21 | P/F P.V.C. waste pipe for W.H.B./sink 32mm dia etc all complete. |
| 22 | CP. Brass waste Jali for Sink etc all completed. |
| 23 | Supply and fixing of anodized aluminium partition having 2mm thick aluminium. Section, partly glazed and partly 12mm thick |
| 24 | Supply & installation of 1.5 HP submersible pump including boring 60.00mt and lowering the pipe and all accesaries and all |
| 25 | Construction of manhole chamber of 0.60x0.50x0.90m Internal size with b/w, plaster, cover, C.l. sheet, labour T&P etc required for proper completion of |
| 26 | writing work etc. all complete |
| 27 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1 sq. 1 x 4 mm. FR PVC insulated multistrand single core copper conducter cable in PVC conduit |
| 28 | Supply and fixing of ceiling fan etc all completed |
| 29 | S/F of Exhaust fan with 1.5sq mm FR PVC insulated copper conductor cable in 25mm dia heavy duty etc all compete. |
| 30 | Wiring point for light with 1.5sq mm FR PVC insulated single core copper conductor cable in pvcconduct pipe on surface, |
| 31 | Construction of granular sub base(GSB) by providing coarse graded material, spreading in uniform layer with mortor grader on |
| 32 | Providing and laying of 125micron plastic sheet etc all complete. |
| 33 | Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering - All work up to the plinth level in 1:1.5:3 (1 cement: 1.5 coarse sand (zone-iii): 3 graded stone |
| 34 | Additional of non metallic C.C. surface hardner etc all complete. |
| 35 | Providing & fixing UV stabllised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or |
| 36 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of |
| 37 | Providing and fbdng factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, |
| 38 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
