|
| 1 | Providing and laying Integral cement based water proofing treatment Inctuding preparation surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:With average thickness of 120 mm and |
| 2 | Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering - All work up to the plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii): 3 graded stone aggregate 200 mm nominal size |
| 3 | Dismantling of brick work or stone work in lime or cement mortar and including stacking of materials as directed by engg. 1/c. within a distance of 60mtr. |
| 4 | Brick work with common burnt clay (non modular) bricks of class-150 in super structure above plinth level up to floor V level in all shapes and sizes cement mortar 1:4 (1 cement: 4 coarse sand) |
| 5 | 12mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 6 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorbtion less than 0.08% |
| 7 | Providing and fixing 19 mm thick prelaminated particle board fiat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminum doors, |
| 8 | Supply and fixing of switch box 175 x 100 x 65 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet |
| 9 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. Sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive as per IS : 277 and consisting of angle of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre-12mm thick |
| 10 | Providing and fhing in position wall Parners of piam teak wood particle board 12mm thick bonded with B.W.P. type Phenol formaldehyde synthetic resin tiles |
| 11 | Applying priming coat over new steel or 2 x 1/2 other metal with two coats after priming coat up to 10cm width or girth or small articles not exceeding 0.105q.M in area with superior synthetic enamel such as Luxol 3, in even shade with labour T&P |
| 12 | Providing and fbdng factory made uPVC white colour casement/casement cum 13 fixed glazed windows comprising of uPVC multl-chambered frame, sash and mullion (where ever required) extruded profiles |
| 13 | Supply and fixing of anodized aluminium partition/aluminium door having 2mm thick aluminium. Section, partly glazed and partly 12mm thick laminated board. Aluminium board size 83.50x44.65mm as vertical member and 11.40x44.45 as bottom and horizontal member with all |
| 14 | Providng & fixing 18mm thick granite (gang saw cut), mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, |
| 15 | Scraping of old white or colour wash including refusal of dismantled material up to 60.0mtr distance as per direction by engg-in-charge. |
| 16 | Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give even shade over including curing and cost of all |
| 17 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undecoarated wall surface to give even shade over 1.25Ltr/105qm including |
| 18 | Supply and fitting of ceiling fan Usha, 1 x 4 Khetan, Bajaj 1.5.1 mark including all complete. |
| 19 | S/F of LED. bulb lighting of approved quality etc all complete. (M.R.) |
| 20 | S/F of fresh air exhaust fan with 1.5sq mm 1 x 3 FR PVC insulated copper conductor cable in 25mm dia heavy duty etc all compete. |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the |
| 22 | Supply and fixing of P.V.C. doors of 1\\" thick commercial quality including fixing and adjustment of hinges, bolts locks, handles spring fitting etc all complete. |
| 23 | Providing and fixing of brass bib cock of approved quality: 15mm nominal bore |
| 24 | Wiring point for light with 1.5sq mm FR PVC insulated single core copper conductor cable in pvcconduct pipe on surface, complete with 14 SWG copper |
| 25 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1 sq. mm. FR PVC. Insulated multistrand single core copper conducter cable in PVC conduit pipe on surface, complete with 14 SWG copper |
| 26 | providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983with c.i brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the |
| 27 | Provinding and fixing of white vitreous china pedestal type water closet (Europeon type W.C. Pan) with seat and lid, 10litre low level white vitreous china |
| 28 | Supply and fitting of 6Amp to 32Amp SP 1 x 1 MCB KA (10KA) legrend hexic etc all complete. |
| 29 | Supply & hoisting of sintex or equivalent 30 high density polytheleneseamiess of piece moulded tanks and placing the same in |
| 30 | Providing and fixing of Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold 15mm nominal outer dia pipes |
| 31 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
