|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group B. [D.S.R. No.1.10.2] |
| 2 | Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. [D.S.R. No.1.11] |
| 3 | Supplying and fixing brass batten/ angle holder including connection etc. as required. [D.S.R. No.1.34] |
| 4 | Supplying and fixing 5/6A modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. [D.S.R. No.1.24.1+1.24.4] |
| 5 | For plug points only :- Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. [D.S.R. No.1.31] |
| 6 | For Cable TV points only :- Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (2 Nos. of switch and sockets are reqired for each cable TV points.) [D.S.R. No.1.31] |
| 7 | Supplying and fixing TV antenna socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. [D.S.R. No.1.24.7] |
| 8 | Supplying and drawing of co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required [D.S.R. No.1.19] |
| 9 | Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessroies in surface/recess including cutting the wall and making good the same in case of recessed conduit as required (25m taken for each TV cable and 25m for all plug points). [D.S.R. No.1.21.2] |
| 10 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. [D.S.R. No.1.32] |
| 11 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. [D.S.R. No.1.57] |
| 12 | Supplying and drawing of 1x1.5 sqmm of FRLS/HFFR PVC insulated copper conductor, single core cable for Inverter in the existing surface/ recessed steel/ PVC conduit as required. [D.S.R. No.1.17.1] |
| 13 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 12 way , Double door, 240 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) [D.S.R. No.2.3.3] |
| 14 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. [D.S.R. No.2.10.1] |
| 15 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core (multi stranded) cable in surface/ recessed medium class PVC conduit as required. 2X 2.5sq.mm+1X2.5sq. mm earth wire [D.S.R. No.1.14.2] |
| 16 | 2X 4sq.mm+1X4sq. mm earth wire [D.S.R. No.1.14.3] |
| 17 | 2X 6sq.mm+1X6sq. mm earth wire [D.S.R. No.1.14.4] |
| 18 | 2X 10sq. mm + 1X 6 sq. mm earth wire [D.S.R. No. 1.14.5] |
| 19 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. [D.S.R. No.1.38] |
| 20 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep and extra for louvers/shutters comp with frame for a ex fan [D.S.R. No.1.50.1+1.51] |
| 21 | Supply, Installation, Testing and Commissioning of 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. [D.S.R. No.9.1.3] |
| 22 | Supplying, installation, Testing & Commissioning of 18- 22 Watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) [D.S.R. No. 8.10.01 ] |
| 23 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep and extra for louvers/shutters comp with frame for a ex fan [D.S.R. No.1.50.1+ 1.51] |
| 24 | Supply & fixing of water tight oblong 10 watt LED Bulkhead luminaire having pressure die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity / transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection, suitable for 24 Hr Continuous Operation,1200 system lumens, >120 Lm/W, PF>0.95, CRI >70, >300V over voltage protection, 4 KV internal Surge Protection, metal housingwith 5 years warrantee Complete in All respect. compelete in all respect. |
| 25 | Supplying, installation, Testing & Commissioning of 50 watt Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). [D.S.R. No.8.13.12] |
| 26 | Supply and fixing 63 A FP MCB 240V/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker |
| 27 | Supply and fixing Lamp based LED Mirror Light 9 watt lumen 800 complete in all respect. |
| 28 | S/F of 4 ways MCB enclosure,sheet steel,powder coated within complete in all respect. |
| 29 | Supply and fixing of Decorative wall Bracket, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 base. Havells Make FLORETTE WL 1LS E27 SS |
| 30 | Supply of fresh air Fan 300mm 900 pm, 230/250 volts,50Hz. Make Havells Model Ventil Air DS Green |
| 31 | Earthing with GI earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. [D.S.R. No.5.4] |
| 32 | Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. [D.S.R. No.5.7] Please Enable Macros to View BoQ information |
