|
| 1 | Dismantling of 50 HP 1440 RPM 50 Cycle, 3 Phase, 440 volt induction motor i/c following works. |
| 2 | Opening of motor & carefully taking out of rotor assembly & cleaning of starter winding & removing of moisture tapping of winding after tapping varnishing of starter winding by Dr. Back Varnish & drying by heating process. |
| 3 | Dynamically balancing of Rotor Assembly. |
| 4 | New lead wire 6 nos. |
| 5 | Terminal plate set. |
| 6 | 6314 bearing C-3. |
| 7 | Dismantling of burnt starter winding cutting cleaning of starter slots by CTC & fully rewinding by above material with varnishing testing complete labor charges. |
| 8 | Providing of super enamalled copper winding wire app. 30 kg. |
| 9 | Providing of insulation material lead wire, glass tape, varnish, terminal plate & tapping material etc. |
| 10 | Repair of 50 HP 1440 RPM 30 mtr. Head non-clog centrifugal pump set no. 1 & 2 at Chakratirth sewage pumping station i/c following works |
| 11 | Dismantling of 50 HP non-clog centrifugal pump set complete repairs & machining of pump shaft making bearing seat with fitting of pump after repair labour charges including providing of fixing of above accessories. |
| 12 | Housing sleeves as per bearing size. |
| 13 | Water circulation ring. |
| 14 | Impeller nut. |
| 15 | Oil seal set as per sample |
| 16 | Providing of bearing size 6313. |
| 17 | Providing of bearing size NU roller. |
| 18 | M.S. Studs as per sample. |
| 19 | Gland & chamber studs. |
| 20 | Gland plate with fasteners. |
| 21 | Providing of couple fulley set 250 mm dia size with couple bolt & bush. |
| 22 | Recasting of pump impeller back side plates as per required size i/c complete work. |
| 23 | Repair of 150 HP 1440 RPM 50 cycle 440 volt 3 phase kirlosker make induction motor including following works. |
| 24 | Complete opening fitting loading site to work shop & work shop to site. |
| 25 | Dismantling of motor carefully taking out of rotor assembly and fitting after complete repair with trial and testing of site including both site transportation and proper alignment. |
| 26 | Providing of super enamalled copper wire. |
| 27 | Providing of F-Class insulation material ampere clothe, tab, fiber glass, tab, glass sleeves, soldering material etc. as per required for starter winding. |
| 28 | Providing of lead wire set with lugs. |
| 29 | Labour charges for cleaning of starter slots by CTC & fully rewinding of starter by material after winding, fully starter winding, varnishing by Dr. back varnish and drying by heating process complete job. |
| 30 | Cleaning of stator winding and removing of moisture & varnishing of startor winding by Dr. back varnish and drying. |
| 31 | Providing and fixing of terminal plate. |
| 32 | Providing and fixing of bearing no. 6318 and 6314 |
| 33 | Rotor assembly dynamically balancing including welding and machining work complete job. |
| 34 | Repair of 150 HP 1440 RPM 30 mtr. Head non-clog centrifugal pump set including following works. |
| 35 | Dismantling of 150 HP non-clog centrifugal pump set complete repairs & machining of pump shaft making bearing seat with fitting of pump after repair labour charges including providing of fixing of above accessories. |
| 36 | Housing sleeves as per bearing size. |
| 37 | Water circulation ring. |
| 38 | Impeller nut. |
| 39 | Oil seal set. |
| 40 | Providing of bearing size 6319. |
| 41 | Providing of bearing size 7319. |
| 42 | M.S. Studs as per sample. |
| 43 | Gland plate with fasteners. |
| 44 | Casting of G.M. gland bush ID-95, OD-90, H-125 mm. making of pattern with complete machining work. |
| 45 | Repair of pump housing body including welding & machining. |
| 46 | Providing & casting of distance pieces cast iron sleeves as per required size. Please Enable Macros to View BoQ information |
