|
| 1 | Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings.UADD SOR VOL. - I 2nd Aug. 202120.1/254 |
| 2 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 200mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 200mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.6/P-255 |
| 3 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 4 | in all types of rocks. |
| 5 | I.S.I. marked UPVC casing pipe confirming to IS 4985/1988 (with up-to-date amendments) CM casing pipes 200 mm dia20.26.8/P-259 |
| 6 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 150mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 150mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.4/P-255 |
| 7 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 8 | in all types of rocks. |
| 9 | Supply of I.S.I. marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per I.S. 1239 (Part-1 & Part-2) 1992 with IVth revision (Up-to-date amendments) 150 mm dia20.25/P-259 |
| 10 | Drilling of perfectly vertical bore hole of 150mm diameter upto desired depth below ground level in all types of rock including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete20.5/P-255 |
| 11 | Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V±10%, 3Ph, 50HzA.C. Supply, with cable guard, thrust carbon/fiber bearing to with stand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3m submersible copper conductor cable insingle / double run and 2 pairs of suitable size erection clamp 10mm thick shall be provided with each pump. Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stagesUADD SOR VOL. - I 2nd Aug. 202116.3.2/P-200 |
| 12 | 7.5 HP |
| 13 | Supply rate should be increased by Rs.600/- per stage for pump with more than 8 stages |
| 14 | Providing laying and jointing of galvanised Iron Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testingof joints, cost of pipes, specials and jointing materials all complete. Medium 50 mm dia.6.1.6P-88 |
| 15 | Providing and fixing full way gate valves tested to 21.00 kg/sq.cm. Screwed 50 mm dia6.3.6/P-89 |
| 16 | Providing and fixing gun metal/brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm. Screwed 50 mm dia6.8.6/P-90 |
| 17 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe andmaking long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 6.23.6/P-94 |
| 18 | Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc.complete (Old work) 50mm dia6.27.6/P-95 |
| 19 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. For single phase motor6.0 Sq.mm.multi strandMPPHED SOR Sep. 202311.5/P-165 |
| 20 | Labour only for lowering of three phase submersible pumping set in the tube well with pipe line assembly, electrical cable, testing etc. Complete including connecting the electrical cable from pump & starter. Above 7.5 hp to 12.5 hp - depth up to 150 mtr.26.3.2P-331 |
| 21 | Supply of XLPE Insulated power cable (conforming IS-7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade, 2core/3½core/4core ISI MARKED with Alu. Stranded /solid conductorARMOURED 4 Core10 Sq.mm.(Heavy Duty)UADD SOR VOL. - IV 2nd Aug. 202114.1/P-78 |
| 22 | Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle, 10 kA Value AC supply confirming to IS: 8828 : 1996, IEC: 60898 :2002 but without enclosuresFOUR POLE (FP) 50 Amp to 63 Amp Rating8.5/P-41 Please Enable Macros to View BoQ information |
