|
| 1 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed. |
| 2 | Material and labour for 15mm thick rendering in Cement and Sand mortar 1:4 over concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for prepration of newly plastered surface and appplying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and ditected. |
| 4 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out loose/soft soil complete all as specified and directed. |
| 5 | Returning , filling in soil (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed. |
| 6 | Removing excavated material n exc. 50 m depositing where directed at a level n exc.1.5 m above the starting point all as specified and as directed. |
| 7 | M&L PCC (1:4:8) type D2 (40mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed. |
| 8 | M&L Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 9 | M&L for 75 mm thick PCC 1:4:8 type D-2 (40 mm graded crushed stone aggs) as in in sub base complete all as specified and as directed. |
| 10 | M&L Providing cement concrete 1:2:4 type B-0 using 12.5 mm graded aggregate as in kerbs or mud stops,rounded or chamfered on edges complete all as specified and as directed. |
| 11 | Taking down existing barbed wire of any description and removing to store complete all as specified and directed. |
| 12 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire,staples or steel pins, etc. as directed (each line wire to be measured including). |
| 13 | Dismantling of posts or struts of RCC any section incl taking out embedded portion and making good disturbed portion, (posts embedded in concrete or in hard core) complete all as specified and directed. |
| 14 | Excavation in post holes not exc 0.50 cum, getting out, returning filling in and ramming earth, watering and removing surplus soil not exc 50 m in soft/loose soil. |
| 15 | M&L PCC 1:3:6 type C2 (40 mm graded crushed stone aggs) as in walls orretaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars, posts (including caps and bases). |
| 16 | S&F post and struts in fencing including cutting tops to shape and directed , drilled holes, notching for wire etc , mild steel angle, flat iron fillets for secruiring chain link /wire mesh including all necessary drilling. bolting or riveting etc , conforming to fe-290, Gde E-165 complete all as specified and directed. |
| 17 | Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. incl provision of binding wire complete all as specified and directed. |
| 18 | Supply only chain link fencing 4 mm dia, MS galvanised wire complete all as specified. (Weight will be measured at site through a BOO convened by Accepting Officer). |
| 19 | S&F mild steel screw bolts (machine made) or square heads at one end and screwed the other with length of bolt 50mm and diameter of shank 11 to 15 mm. complete all as specified and directed. |
| 20 | S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde-E-165 ) complete all as specified and directed. |
| 21 | S&F 8 Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410W Gde E-250 quality A. |
| 22 | Material and labour for two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 23 | Material and labour for two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces n.exc. 10 cm width or girth including preparation of new surfaces complete all as specified & directed. Please Enable Macros to View BoQ information |
