|
| 1 | Civil Works |
| 2 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 CM layers with compaction including disposal of surplus soil as directed with in a lead of 30 meters. |
| 3 | Cement Concrete 1:4:8 With stone aggregate 40mm gauge mixed by mechanical means using concrete mixer volumetric type |
| 4 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth |
| 5 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth |
| 6 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. |
| 7 | 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure |
| 8 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 9 | 12.5 mm thick cement plaster 1:4 |
| 10 | Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines. |
| 11 | shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 12 | Centering and shuttering for columns (Square or rectangular or poly gonal in plain) |
| 13 | Centering and shuttering for sides and soffits of beam, beams launchings, girders bressumes, lintels. |
| 14 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 15 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 16 | Size 600x600 mm |
| 17 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mix |
| 18 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 19 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete |
| 20 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 21 | Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade |
| 22 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS clamps. U-PVC pipes (working pressure 4 kgf. / sqcm) pipe 110 mm dia |
| 23 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend |
| 24 | Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm Coupling /Sockets |
| 25 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 |
| 26 | Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps |
| 27 | Extra labour for projected nosing of stair case of any shape and design. |
| 28 | Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect |
| 29 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : |
| 30 | For fixed portion and chawkhats |
| 31 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required |
| 32 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. |
| 33 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness |
| 34 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm |
| 35 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete |
| 36 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete |
| 37 | I.S.I Designation No. II (size of door 701mm to 850mm) |
| 38 | I.S.I Designation No. III (size of door 851mm to 1000mm) |
| 39 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. |
| 40 | Single Socket Type B |
| 41 | 110mm o/d SWR UPVC pipe lines laid complete |
| 42 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipes |
| 43 | Elbow 90 Degree (All side socketed) |
| 44 | Coupler |
| 45 | P Trap/Floor Trap 110mm x 110mm |
| 46 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. |
| 47 | With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg) |
| 48 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. |
| 49 | 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 50 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. |
| 51 | Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal |
| 52 | Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete |
| 53 | UPVC Pipe 6 Kgf/cm2 50mm i/d |
| 54 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 55 | 15mm i/d |
| 56 | 20mm i/d |
| 57 | 25mm i/d |
| 58 | 40mm i/d |
| 59 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 60 | Size 75mm x 75mm |
| 61 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 62 | Through wall 11.43 cm thick |
| 63 | Through wall 22.86 cm thick |
| 64 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 65 | 15mm i/d G.I. Union |
| 66 | 20mm i/d G.I. Union |
| 67 | 25mm i/d G.I. Union |
| 68 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete |
| 69 | 25mm i/d Brass Ball valves |
| 70 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 71 | Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 72 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. ) |
| 73 | With C.P. Brass nut |
| 74 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 75 | Providing and fixing in position Vitreous Chinaware white urinal with concealed or in built P-trap (size 310x370x640 mm) with built in water seal, outlet to wall and water inlet from back of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 76 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 77 | Size 550 mm x 400 mm x 815 mm |
| 78 | Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 79 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect |
| 80 | Vitreous chinaware standard white pedestal for wash hand basin |
| 81 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 82 | PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut |
| 83 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 84 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect |
| 85 | C.P. brass towel Rails size 15mm dia 610mm long |
| 86 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect |
| 87 | C.P. brass Bib cock long nose/ long body foam flow without flange |
| 88 | C.P. brass Bib cock foam flow without flange |
| 89 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 90 | C.P.brass 20mm concealed stop cock with flange |
| 91 | C.P.brass 15mm Concealed stop cock with flange |
| 92 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 93 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect. |
| 94 | C.P. Brass extension piece, 25mm long to 50mm long |
| 95 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 96 | Size 600mmx450mm |
| 97 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. Brass Accessories: |
| 98 | C.P. brass toilet roll holder with flap |
| 99 | Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. |
| 100 | C.P. Brass khunti with 3 pegs |
| 101 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 102 | Double Layer Tanks (1000 litre capacity) |
| 103 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 104 | Plastic Ball Cock with rod and Plastic Ball 25mm i/d |
| 105 | Brass Ball Cock with rod and Plastic Bal 25mm i/d |
| 106 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. |
| 107 | G.I. tank nipple 25mm i/d |
| 108 | G.I. tank nipple 40mm i/d |
| 109 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. |
| 110 | Earth work upto 1.5 m. Depth for |
| 111 | All classes of soil except rocky |
| 112 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. |
| 113 | 160 mm i/d pipes |
| 114 | Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. |
| 115 | Inside size 75x120 cm and 120 cm deep |
| 116 | Extra payable for every 0.30 m additional depth of manhole chamber in item 29.55 upto 1.80 m increase in depth. each Depth of 0.30 m. |
| 117 | Inside size 75x120 cm |
| 118 | Extra for making connections of all sizes newly laid sewers within benching of fully charged sewers including pluging of sewer, dewatering & desilting of manholes etc |
| 119 | with existing sewer of 300 mm i/d and below |
| 120 | Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications |
| 121 | 200mm o/d PVC pipe of 4 Kgf. / sqcm |
| 122 | 160mm o/d pipe of 4 Kgf. / sqcm |
| 123 | Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick C.C 1:6:12 in foundation, first class brick work laid in cement sand mortar 1:5, 40mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12.50mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement 1mm thick left absolutely smooth polished and correct to template including cost of precasted RCC road gully grating and frame including paint with coal tar (as specified in item No. 29.49) complete and to the requirement of the E.I.C |
| 124 | Single Road Gully chamber |
| 125 | Size 610mm x 457mm x 800mm |
| 126 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 127 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified |
| 128 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15cm layers including ramming, watering and consolidating lead upto 30 metres. |
| 129 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto40%excavated fromoutside thebuildingplinthin15cmlayersincluding ramming, watering compensation of goodearth, carriage to site, loading unloading etc. |
| 130 | Construction of embankment with earth obtained from out side the campus including loading, unloading, spreading, grading to required slope and compacting by laying earth as per specifications in 20 cm layers and dressing including watering the earth of CBR (soaked) more than 8% laid in 20 cm layers as per specifications for compaction without rolling as per MORT&H specifications including compensation for earth taken from private land and carriage upto site of work complete in all respects. |
| 131 | Providingand laying80mmthick factorymade cementconcreteinterlockingPavingblocksofM 40 grade manufactured by block making machineequippedwithsteelmouldclampedtoa strongvibratorytablewithhydraulicpressure for compactionofconcreteasper IRCSP63-2014 andof approvedsizeanddesign/ shape laid in Ordinary Grey Colour and pattern over and including40mmthickcompactedbedof coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in Charge |
| 132 | Precast Cement Concrete Kerb : Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications |
| 133 | Electrical Works |
| 134 | RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 135 | Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 136 | Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. |
| 137 | RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 138 | Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 139 | Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. Universal Socket (shuttered) and 2Nos. 16/20Amp. switch with indicator (Modular accessories). |
| 140 | RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 141 | Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface): |
| 142 | Wiring TV socket point (one module) |
| 143 | Wiring Telephone socket point RJ11 (one module) |
| 144 | Wiring Networking socket point RJ45 (one module) |
| 145 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: |
| 146 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized ncealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10 Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 147 | Wiring fan point (With fan box)/ hook with falshnut etc. |
| 148 | Wiring light point |
| 149 | Wiring call-bell point |
| 150 | Wiring 6Amp. wall socket point |
| 151 | Wiring 6Amp. Plug control comprising wall socket point. |
| 152 | Wiring 16/20Amp. power plug control point |
| 153 | Wiring light point without control switch |
| 154 | Wiring light point with double control switches. |
| 155 | PVC INSULATED FR COPPER CONDUCTOR CABLES: |
| 156 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge |
| 157 | Overall size 1.5sq.mm (Un-sheathed) |
| 158 | Overall size 2.5sq.mm (Un-sheathed) |
| 159 | Overall size 4sq.mm (Un-sheathed) |
| 160 | Overall size 6sq.mm (Un-sheathed) |
| 161 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer in charge. |
| 162 | Overall size 2.5sq.mm (50/0.25mm), 3Core |
| 163 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE): |
| 164 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 165 | Overall size 16sq.mm (4Core) Un-armoured (Loose) |
| 166 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: |
| 167 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 168 | Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed) |
| 169 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 170 | Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed) |
| 171 | Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- |
| 172 | PVC Flexible Pipe 25mm dia. |
| 173 | Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections:- |
| 174 | Brass Gland for Aluminium cable 2/3/4 Core size 10 sq.mm. |
| 175 | Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). |
| 176 | Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8 Metre in length) |
| 177 | G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): |
| 178 | Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (Flushed in wall and floor) with sockets, elbows and Steel hooks including the cost of cutting and filling up of chases (with finishing the surface): |
| 179 | Additional length G.I. wire 8 S.W.G. (4mm dia.) in 15mm dia. G.I. pipe (Flushed) |
| 180 | Bonding to existing earth with 8S.W.G. (4mm dia) G.I. wire fixed with stapples on wall. |
| 181 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: |
| 182 | Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- |
| 183 | Bakelite Batten Holder (Large size) |
| 184 | Call Bell 220/230 volts AC Ding Dong |
| 185 | MINIATURE CIRCUIT BREAKERS: |
| 186 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 187 | MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 188 | MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 189 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCA’s/ RCBO’s / RCCB’s |
| 190 | Supply and erection of Sheet Metal Double Door Distribution Boards Ip 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper bus bars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking pleates and circuit identification label and for required no. of ways for mounting miniature circuit breakers/RCBO’s/RCCB’s in the Distribution Board(for SP&N distribution board with provision DPMCB’s/ RCBO’s/RCCB’s as incomer and SP MCB’s as outgoing’s and for TP&N horizontal distribution board with provision TPN?PP MCB’S/ RCBO’s/RCCB’s as incomer and SP MCB’s as outgoing) as per PWD general specification including connections with suitable size of thimbles and bonding to existing earth etc;- |
| 191 | TP&N Horizontal Double Door Distribution Board 8 way each |
| 192 | DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: |
| 193 | Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 194 | Double Walled Corrugated HDPE Pipe 50/38mm (Outer/ Inner dia.) |
| 195 | Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely: |
| 196 | Aluminium thimble cable Core size 10 - 16sq.mm |
| 197 | Supply, test, intall and commisioning of 48\\" (1200mm) 5 star BLDC ceiling fan with standered warranty including petty material such as rod connecter, connectin wire etc.complete in all respectl to entire stasfaction of engg. in charge |
| 198 | Supply and erection of 300mm Exhaust fan 900 rpm single phase ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing with louver shutter on the wall/ window grill including erection, connections and testing etc. complete with flexible wire and other patty material complete in all respects as appd. and desired by the Engineer in-charge at site |
| 199 | Supply, erection, testing and commissioning of 100 watt LED Flood lighting fitting complete in all respect including petty material such as clamp, nuts/ bolts etc whats so ever is required to complete the job to entire satisfaction of Engineer in charge and as per following specifications Approved by Technical advisor to Hon’ble CM, Punjab vide Letter No AT/2021/GL/1410-1422, Dated 06-05-2021 |
| 200 | Supply, erection, testing and commissioning of 18/ 20 watt surface type LED downlight including petty material complete in all respects to the entire satisfaction of engineer incharge of reputed make |
| 201 | Supply, erection, testing and commissioning of 18/20 watt LED Betten rod four feet long complete in all respects to the entire satisfaction of engineer incharge including petty material, whats so ever is required to complete the job to entire satisfaction of Engineer in charge and as per specifications Approved by Technical advisor to Hon’ble CM, Punjab vide Letter No AT/2021/GL/1410-1422, Dated 06-05-2021 Please Enable Macros to View BoQ information |
