|
| 1 | Removing and dismentaling of cement plaster from walls including raking out the joints 12mm deep and removing the drbries within 50mtr lead etc complete as per the direction of EIC |
| 2 | Providing 12 mm thick cement plaster in CM (1:6) to the walls, watering & curing the same including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge |
| 3 | Providing 16mm thick CP (1:6) over brick work including all cost conveyance, Royalty & taxes etc complete of all materials to work site as per specification approved of E.I.C. |
| 4 | Providing Cement washing two coats over plastered surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 5 | Providing Weather Seal Coat two coats with appproved quality and shade over a coat of Cement Wash over plaster surface with brush including clearing the surface watering curing cost of Weather Seal Coat Paint, taxes labour charges T&P etc. Complete as per direction of Engineer-in-charge |
| 6 | Painting 2 coats of enamal paint including cost of material and labour charges etc complete. |
| 7 | Supplying and fitting with Iron work wrought and put up in grills, trusses and purlins and posts including fabrication etc. complete as per direction of EIC. |
| 8 | First class Fly Ash brick work in cement mortar (1:6) in foundation and plinth with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 9 | Super Structure work |
| 10 | Carriage of dismantalled materials by mechanical means within 5 km lead including loading and unloading with all cost conveyance T & P sundries etc Complete as per direction of Engineer in-charge. |
| 11 | PART-B INSIDE PAVER BLOCK FIXINGEarthwork excavation in hard soil including rough dressing and leveling the bed and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 12 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-charge. |
| 13 | Cement concrete in prop. (1:4:8) in foundation using 4 cm size CBHG metal of quality from approved quarry washed and cleaned including hoisting, lowering, laying concrete, ramming, watering, curing etc to required level lincluding cost, conveyance, royalties and taxes of all materials with cost of all labours, sundries and T & P such as concrete mixer, concrete vibrator required for the work etc, complete as per specification and direction of E-I-C |
| 14 | C.C (1:2:4) with 12mm to 20mm size HGCB chips for CC/RCC works including all cost, conveyance, royalty & taxes etc. comp. of all materials to work site as per schedule item of work and the specification approved by the department & direction of Engg-in-charge |
| 15 | Rigid smooth centering and shuttering for RCC or CC work(F&P) including false works, supplying of centering materials, its hire charges, cost of labour T & P and dismentalling after casting the concrete etc all complete as per direction of EIC |
| 16 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-30 grade With approved colour design Pattern etc complete as per direction of EIC. |
| 17 | PART C MANDAP OUTSIDE PLASTER/ALL CHAJJADismantalling & removing of Cement Concrete under 3.00mt.height for re-use and depositing the same within 5.00m lead and 1.50mt lift etc complete as per the direction of EIC |
| 18 | Supplying fitting and fixing of openabic UPVC doors and windows with door frame of approved make with 6 mm thick glass of approved qualify complete with frame shutters and all fitting and fixtures |
| 19 | Windows Ventilator |
| 20 | Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, TSP hire charges of drilling machine, labour charges etc. complete excluding cost of laminated board, |
| 21 | Supplying, fitting, fixing of sal wood runner 075x050mm size etc complete as per direction of EIC. |
| 22 | Wooden fixing nut bolt |
| 23 | Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade excluding cost of paint and wall primer with cost of all materials, labour T&P etc complete as per direction of EIC. |
| 24 | RCC M-25 with 20mm size downgraded CBHG chips including all cost, per the specificatiosn approved by the department and the directions of the conveyance, royalty and taxes etc. complete of all materials to work site as Engineer-in-Charge |
| 25 | Straightening, cutting, bending and binding, welding and jointing (if necessary) coiled/bent up M.S. rods/Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 guage binding wire required for R.C.C. work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wires will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S. rods or Tor steel linear measurements of rod for finished item of works etc complete as per direction of EIC |
| 26 | Providing and Laying 6mm thick C.P. in C.M.(1:4) over RCC Surface finished smooth including close deep chipping & slurry treatment with watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 27 | Repair and Fixing of M.S Colassible gate with cost of all labour, materials T&P required etc complete as per direction of EIC |
| 28 | Scraping and cleaning with acid washing etc with cost of all labour, materials T&P required etc complete as per direction of EIC. |
| 29 | Supplying all materials, labour, T&P and fixing of following P.H. and Sanitary fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer in-charge.Low level 10Ltr PVC. Cistern with fittings |
| 30 | C.P Shower |
| 31 | EWC Pan with cover |
| 32 | 100mm dia CP floor Grating |
| 33 | 40mm dia basin waste pipe |
| 34 | 15mm dia long body bib cock |
| 35 | 110mm dia PVC Pipe |
| 36 | 15mm dia PVC Bend |
| 37 | 110mm dia PVC Toilet gas pipe |
| 38 | 110mm dia PVC Tee |
| 39 | 110mm dia PVC Plain bend |
| 40 | 110mm dia Door Tee |
| 41 | 50mm dia UPVC Pipe |
| 42 | Supply and filling with good quality earth (Flower bed) in layers including watering, with cost, conveyance, royalties, and taxes of all materials, cost of all labour, carriage of water, sundries T & p required for the work etc all complete as per the direction of EIC. |
| 43 | 40 mm thick grading concrete (1:2:4) on roof slab with 12 mm & down grade CBHGC chips for old work, including cost, conveyance, royality, taxes of all materials and labour, T&P etc. all complete as per direction of Engineer-in-charge. |
| 44 | Supplying, fitting and fixing of 110m dia PVC Rain water pipe etc complete as per the direction of E.I.C. |
| 45 | C.C (1:2:4) with 12mm to 20mm size HGCB chips for CC/RCC works including all cost, conveyance, royalty & taxes etc. comp. of all materials to work site as per schedule item of work and the specification approved by the department & direction of Engg-in-charge |
| 46 | Dismantling and removing old tiled cladding from walls including racking out Joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m Lead |
| 47 | Supplying, fitting and fixing vitrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS: 15477 of 3 mm thick bed and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer- in- Charge. (for repair work only) |
| 48 | Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. |
| 49 | Rubbing old marble chips or marble tile flooring and dados skirting including wax polishing to give granolithic finish etc as per direction of Engineer-in-charge. |
| 50 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top, cement plaster (1:3) inside and outside, inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab, 50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 51 | Supplying all materials, labour and T&P for construction of Manhole Chamber of size 1200mmx900mmx900mm dia including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 52 | Supplying, fitting and fixing of RCC Benches of approved quality and make including cost of all materials, labour, T&P etc all complete. |
| 53 | Labour charges for cleaning of debries etc all complete. Please Enable Macros to View BoQ information |
