Name of Work:- y[kuÅ cfy;k ekxZ ¼,l-,p&34½ ¼pSust 285-00 ls 291-400½ rd lkekU; ejEer ls uohuhdj.k dk dk;Z (As per Bill of Quantity)
Sl. No.
Item Description
1
Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
2
Providing and laying dense graded bituminous macadam Grading-II with 120 TPH batch type HMP producing an avarage output of 75 tonne per hour using crused aggregates of specified grading premixed with bituminous binder @ 4.50 percent by weight of total mix and filler , transporting the hot mix to work site , layig with hydostatic paver finisher with sensor control to the required grade , level and aligmnment , rolling with smooth wheeled , vibratory and tendom roller to achieve the desired compaction as per MoRT&H Specification Clause 505 complete in all respects.
3
Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.
4
Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35-2015 The finished surface to be level, uniform and free from streak and holes
5
Providing and laying of hot appiled thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, Thickness of 5 mm is exclusive of surface applied glass beads as per IRC: 35-2015. The finished surface to be level, uniform and free from streak and holes( Bar Marking)
6
Construction of subgrade and earthen shoulders with approved material obtained from barrow pits with alift up to 1.50 m . transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.1 & 300.2 with lead up to 1000 m. as per TS clause 301.5 . (In Patri, Dividor work). Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
