|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 2 | a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in : |
| 4 | a) Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 6 | a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 7 | Deduct for not providing hinges in doors, windows or clerestory window shutters with : |
| 8 | a) ISI marked Stainless steel butt hinges with stainless steel screws : |
| 9 | i) For 2nd class teak wood and other class of wood shutters |
| 10 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 11 | a) Two coats. |
| 12 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 13 | a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 14 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 15 | a) 1:4 (1 cement: 4 fine sand) |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 17 | a) Two or more coats on new work. |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 19 | a) One or more coats on old work. |
| 20 | Polishing on wood work with ready made wax polish of approved brand and manufacture : |
| 21 | a) Old work . |
| 22 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 23 | a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 24 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspectionof work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment shall be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 25 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 26 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 27 | a) In cement mortar |
| 28 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : |
| 29 | a) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 30 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 31 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 32 | a) Orissa pattern W.C. pan of size 580x440 mm |
| 33 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 34 | Providing and fixing Sliding Aluminium Windows of size as per requirement i/c all fitting and Aluminium sections i/c Glass panes, etc all complete as per direction of E-in-C |
| 35 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): |
| 36 | a) From brick work in cement mortar |
| 37 | Brick work with old reusable bricks in: |
| 38 | a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 39 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 40 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 41 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 42 | Credit to agency of unusable dismantled materials Please Enable Macros to View BoQ information |