|
| 1 | M & L for repairs to pot holes not exc 1 Sqm each, incl sweeping free from dust and mud or water scoring sunken surfaces in roads,path etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming the surface complete all as specified and directed. |
| 2 | M & L for preparing existing black top surface by brushing with wire brushes for removing cacked mud etc. scarifying or picking up gravelled macadam/bituminious macadam in area exc 400 sqm and n.exc 50mm deep, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with paving bituminous primer at 80/100(VG-10) grade at 7.50 Kg per 10 Sqm for below BM surfaces. |
| 3 | M & L for premix bituminous macadam with 4% binder content (paving bitumen) laid/rolled and compacted to required gradient and camber (consolidated thickness n.exc. 50mm) all as specified and directed. |
| 4 | M & L for preparing the black top bituminous surface by brushing with wire brushes for removing cracked mud, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt and applying evenly a priming tack coat with bituminous primer @ 5.0 Kg / 10 Sqm of surface using paving bitumen complete all as specified and directed. |
| 5 | M&L for laying and consolidating bituminous premixed ashphaltic semi-dense concrete 30 mm consolidtaed thickness with 5.5% binder content by weight of total mix by using paving bitumen (VG-30 Grade) any penetration rolled and compacted to required cambder and gradient etc. with mechanical paver and rolled with 8 to 12 Tonne power roller and complete all as specified and directed. |
| 6 | M & L for Marking strips, straight lines, zebra crossing and straight lines not less than 2 to 2.5 mm thick and exc 10 cm width with hot applied thermoplastic road marking paint of approved brand (White or yellow) by using automatic mechanical road painting machine with 8% glass beads (intermixed) all as specified and as directed by Engineer In Charge. |
| 7 | S&F in repair metal tubular delineator DA-74 or equivalent ( including dismantling of old delineator),made out of 45mm dia MS pipe of 600mm total height duly powerded coated and made of top quality and durable glass refelactor made of top quality weather resistance plastic material (thermo plastic polyster clastomer) 3 bands of green/red/yellow reflactor of size 25mm wide strips embeded in PCC (1:2:4) 150mmX150mmX300mm size. |
| 8 | S&F in repair solar cat eye Aluminium alloy shell (!00% water proofing design according to 65) (including dismantling of old delineator) of size 125mmx125mmx25mm (shank 60mm) of high efficiency Mono rystafine solar panel 2.4V/0.3 Watt one NI-ed rechargable Battery (1.2V/1600MA) consisting of six super bright LED with 10,000 to 18,000 mcd completed ad per manufatures instruction including taking out old cat eyes and removal from site etc all as specified and as directed. |
| 9 | S&F in repairs cat eye solar reflective type of metal body alloy of size 100mmX100mmX20mm with PAMA strip lens reflector of Model No DA 972 O od make Dark Eye or Equivalent of 3M fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 10 | Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc.15 cm thickness (below or above ground level) and removing from site all as specified and directed. |
| 11 | M & L for hard core gauge not exc. 63mm of broken bricks diposited spread and levelled in layers not exc. 15 cm watered and rammed to a true surface complete all as specified. |
| 12 | M & L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in paving ,floor complete all as specified and directed. |
| 13 | M&L Sand Filling a layer of 50mm thick sand cushioning including filling the joints with sand as in floors/ paths including watering and consolidation complete all as specified and directed. |
| 14 | Material and labour for 80 mm thick, machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks (coloured) , of triangular / Zigzag / Haxagone/ I , in shape or shap and design as approved, with grey cement and pigment , having M-40 Grade and conforming to IS 15658-2006 specifications, complete all as specified and directed. |
| 15 | M&L for factory made precast machine pressed kerb stones of PCC grade M-15 design mix and of shape and size rected, set jointed and pointed cement and sand mortar 1:4 fixed in repairs with and including necessary excavation and earthwork and making good the disturbed surfaces to match with the existing surfaces including removal of dispodal of rubbish complete all as specified and directed. Sizes shall be as under :- Length (L) not less than 300mm, Height (H) 300mm to 350mm, Thickness (T) 100mm and radius (R) 75mm including painting on kerb stone of synthetic enamel paint yellow or white colour complete all as specified and directed. |
| 16 | NOTE : SCHEDULE OF CREDIT (Amount on page No 26 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.) Please Enable Macros to View BoQ information |
