|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | M&L for providing precast cement concrete louvres and jallies of 35mm thick (measured solid), 1:2:4 type B0 using 12.5 mm graded stone aggregate including all mouldings but excluding frame complete including demolition/dismantling of existing jallies, all as specified and directed. |
| 3 | M&L of 50 mm thick sand stone slabs in foothpath, sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete including demolition/dismantling of existing stone complete all as specified and directed. |
| 4 | M&L reinforced cement concret (nominal mix) type B-1,1:2:4 (using 20mm graded stone aggregate) slabs supported on walls, beams, band for jallies and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like etc complete including demolition of existing RCC, all as specified and directed. |
| 5 | Use and waste form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work for rough finished concrete surface exc 10 cm but not exc 20 cm wide complete all as specified and directed. |
| 6 | M&L brick work with fly ash using fly ash straight or curved on plan exc 6m mean radius in CM 1:6 including demolition old brick work complete all as specified and directed. |
| 7 | M&L 15mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement including taking down of existing old plaster on brick or stone walls/ceiling etc complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint over and including a coat white cement based putty (where ever required), complete all as specified and directed. |
| 9 | M&L complete removal of old decorated surface of wall and applying one coat of exterior weather proof water base emulsion paint white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed. |
| 10 | S&F for mild steel TMT bar 6 to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, etc. and fixed with self tapping screws complete all as specified and directed. |
| 12 | S&F steel work in roof truss (framed), vertical post, of tubular pipes including (purlins and rafters) special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed. |
| 13 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire mesh, flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riviting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 14 | M&L preparation of new or untreated surface of steel and iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete as specified and directed. |
| 15 | M&L for providing reinforced cement concrete, type B-1, 1:2:4 (using 20 mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area in exc 100 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed |
| 16 | M&L complete removal of old decorated surface of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over and including one coat of white cement based putty (where it is required) complete all as specified and directed. |
| 17 | M&L formwork to sides of concrete foundations, footings, columns, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter with rough finished surface complete all as specified and directed. |
| 18 | Dismantling of tiles/stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed |
| 19 | M&L for machine pressed precast concrete interlocking paver block in any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment and filling in floors or pavings, laid in layers n. exc 15 cm thick, spread, levelled and bedded with earth and rammed with watering complete all as specified and directed |
| 20 | M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, sub base complete all as specified and directed |
| 21 | M&L for PCC 1:2:4 type B-1 (20 mm graded aggregate) as in coping, benching and simillar works complete all as specified and directed. |
| 22 | M&L 40 mm thick cement concrete type, B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in sub floors , sub bases, floors and paving complete all as specified and directed |
| 23 | M&L for heavy duty light shade anti-skid outdoor tiles of 8-10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm as in floor, providing durability, low porosity for extra wear set and jointed and pointed in chemical resistant mortar, resin type, in floors over and including screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 including demolition old tiles complete all as specified and directed. |
| 24 | Deduct Schedule of credit (calculation will be done off line) Rs. 11000.00 Please Enable Macros to View BoQ information |
