|
| 1 | Demolition Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed. |
| 2 | Dismantling Wrought Iron or Mild Steel Work, viz. MS Flat Iron (Wind Tie) and Similar Work including MS Bolts, Nuts, etc., complete all as specified and as directed. |
| 3 | Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. |
| 4 | Dismantling AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed. |
| 5 | S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 6 | M&L Steel Work in Tubular /hollow section as in Trusses and post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-4923 grade YSt.-240 complete all as specified and as directed. |
| 7 | M&L Hardcore of gauge not exc. 63 mm, broken stone aggregate deposited, spread andlevelled in layers n exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed. |
| 8 | M&L PCC 1:3:6 (nominal mix) Type C-2 using 40mm size stone aggregate as in sub base,flooring or in Fdn Work complete all as specified and directed. |
| 9 | M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection etc complete all as specified and directed. |
| 10 | M/L 75 mm thick P.C.C 1:2:4 type D-2 using 20mm graded stone aggregate as in base/path etc complete all as specified and directed. . |
| 11 | M/L 75 mm thick P.C.C 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base/path etc complete all as specified and directed. . |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 13 | M & L for 18-20mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 14 | S&F for colour Glazed ceramic tiles (450x300) of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and as directed. |
| 15 | M&L designers Heavy duty outdoor tiles 400mm x 400 mm ,9 to 10mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed |
| 16 | M&L Prepolished Coloured Cement Concrete designers Chequered Tiles 400 x 400x 22-25 mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete including 15 mm screed bed in CM (1:6) of thickness complete all as specified and as directed |
| 17 | M&L Prepolished Coloured Cement Concrete designers Chequered Tiles 300 x 300x 25 mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete including 15 mm screed bed in CM (1:6) of thickness complete all as directed. |
| 18 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, complete all as spcified and directed. |
| 19 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as spcified and directed. |
| 20 | M&L for preparation of kerb stone over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed |
| 21 | M&L cement concrete (1:2:4) type-B-2(Using 40 mm graded stone agg) as in surface channel complete all as specified and directed. |
| 22 | M/L for PCC copping type C1 1:3:6 (12.5 mm graded aggr) set in cement mortar (1:6).complete all as specified and directed. |
| 23 | M & L Pre-cast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in wall, cover slab set in CM 1:4 incl necessary formwork. complete all as specified and directed. |
| 24 | M & L TMT bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip to Fe-410 incl fabrication complete all as specified and directed. |
| 25 | Taking down cement plaster on brick/concrete surfaces of drains, walls and ceiling including racking out jointing hacking for key, scrubbing down with water etc. complete all as spcified and directed. |
| 26 | M&L Rendering 15mm thick in Cement Mortar on fair faces of brick work or concrete surface of wall using water proofing compound and finishing the surface even and smooth without using extra cement including necessary scafolding and saftey measures complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately) |
| 27 | M&L Rendering 15mm thick in Cement Mortar 1:4 on other than fair faces of Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed. |
| 28 | M&L Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc in cement mortar complete all as specified & directed |
| 29 | M&L for Flush pointing to brick walls in CM (1:4) complete all as specified & directed. |
| 30 | Supply only integral water proofing compound@ 1% as per Manufacturer instruction complete all as specified and directed. |
| 31 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 32 | M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 33 | M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed. |
| 34 | M&L brick work with sub class'B' bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as specified and as directed. |
| 35 | M&L Reinforced Cement Concrete Type B-2, 1:2:4 (20mm graded aggregate) as in Columns, Pillars, Piers, Posts and Struts, etc. complete all as specified and as directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 36 | M&L Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed. |
| 37 | M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Based Paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 38 | M&L Complete removal of old decorated Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as specified and as directed. |
| 39 | M&L Preparing new Surfaces of Walls and applying Two coats of exterior emulsion antifungus paint over a coat of primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 40 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two coats of exterior emulsion antifungus paint over a coat of primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 41 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 42 | Dismantling posts or struts (wood, steel or R.C.C.) anysection, including taking out embedded portion andmaking good disturbed ground complete all as specified and as directed. |
| 43 | S&F Mild steel wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E- 165 complete all as speci-fied and as directed. |
| 44 | M&L 25 x6mm thick flat iron fillets fixed to the fencing posts incl all necessary drilling bolting or riveting etc and similar work conforming ot Fe 410-0 or Fe 310-0.complete all as specified and directed. |
| 45 | S&F 10mm dia MS round bar fixed to chain link fening Top and bottom.complete all as specified and directed. |
| 46 | S&F 10 mm dia Mild screw bolts machine made) with hexagonal or square heads at one end and screwed the other, or screwed on both ends each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt n exc 5cm long, complete all as specified and directed. |
| 47 | Excavating soft/loose soil in post holes (or similar holes) each n.exc 0.5 Cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance in exc 50m and making good surface, complete all as specified and directed. |
| 48 | M&L for cement concrete type D2 1:3:6 (40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed. |
| 49 | S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured) as in repair.complete all as specified and as directed. |
| 50 | S&F chain link MS galvanised fencing pvc coated, 4mm dia wire and size of mesh 100x100mm x 4mm including line wires to any type of standered rails, straining bolts, nut & bolt for angle iron post MS tie bars incl provisioning of binding wire etc complete.any size or type complete all as specified and directed. |
| 51 | M&L for preparation of new steel surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 52 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.complete all as specified and directed. |
| 53 | M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed. |
| 54 | Dismantling wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters complete all as specified and as directed. |
| 55 | S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 02 nos 1.5mm dia double GI suspendor with J type adjustabe adjuster including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss complete all as specified and as directed. |
| 56 | S&F Machine cut kota stone slab flooring 20-25mm thick (size min 550x 550)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite Finish Polishing) complete over 20mm thick 1:6 cement mortar screed bed complete all as specified and as directed. |
| 57 | S&F Machine cut kota stone slab 20-25mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 20 mm thick backing layer in cement mortar (1:4) including rubbing and polishing complete all as specified and as directed. |
| 58 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule \\"A\\" notes for details. Please Enable Macros to View BoQ information |
