|
| 1 | Supply erection and commissioning of self priming pump set (vacuum pump) of approved make and ISI mark and satisfaction of Engineer in charge |
| 2 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of 200 mm outer dia of PE-80 grade and PN-4 for water supply as per IS 4984-2016 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. |
| 3 | LED Based solar lighting system including It Supply, installation, and commissioning with 5 years warranty, GST, for destination etc. (without rms) with technical specification SPV module of 75 Wp. 12.8 volt 30 Ah Lithium Ferro Phosphate battery, 12 Watt white LED Luminaire and Pole of 5 meter above ground level with dusk to dawn operation (first 4 hours full light (min. 24 lux), rest of the time at lower light (50% min 12 lux) level) and 3 days or minimum 36 operating hours autonomy |
| 4 | Supply erection testing and commissioning of 300mm i/d Electronic FLOW METER (KRONE Make) with digital display including all other required accessories complete complete in respect to the satisfaction of EngineerIn-Charge. |
| 5 | NS Item -Supplying, laying, jointing, testing and commissioning of 300 mm dia 8 mm thick, ERW MS pipe including cost of ms flanges ,Nut Bolt, Rubber Zen and duly painted with anti corrosive paint complete in all respect or as per directed by the Engineer-in-charge |
| 6 | Operation and Maintenance of the project for 3 years after 1 year defect Liability period but to be paid half yearly @ approx. 1% cost of the items i.e (Pump House plus Pipe line plus Electro mechanical components) |
| 7 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of 140mm outer dia of PE-80 grade and PN-4 for water supply as per IS 4984-2016 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. |
| 8 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of 450 mm outer dia of PE-100 grade and PN-8 for water supply as per IS 4984-2016 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. |
| 9 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of 160mm outer dia of PE-80 grade and PN-4 for water supply as per IS 4984-2016 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. |
| 10 | S/E/C of MCC/LT Panel in control room of pump house of 400 Amp with incomer ACB 4 pole and with 03 no outgoing /MCB each of having MCCB of 200 Amp along with an additional MCB of 63 Amp for lighting load, indicators relays meter push button bus bars and with 03 no fully automatic ATS starters suitable for operation of 120 HP motors each with MCCB of 200 Amp with contactor rating as 200/180/160 amp of on/off switches in front of motor .For every motor starter with designed capacitor bank (at least 75 KVAR i.e 25 KVAR for each motor) KVAR suitable capacity with 4 step APFCR selector switch duty contactor discharge resistor digital display instrument and other allied accessories for operation of 03 No motor of capacity 120 HP (2No working and 1 No in standby) with a stand of MS channel (1feet above floor) as per site condition and degree of protection as per IP- 54 as per approved technical specification |
| 11 | “Supply, installation, testing and commissioning of submersible solar pumping set of 7.5 HP capacity, DC type pump with UPSC controller, including all accessories and electrical/mechanical components, complete in all respects, with 5 years warranty of the complete solar pumping set, as required by the New and Renewable Energy Department, Haryana and HAREDA, as per approved specifications and directions issued by HAREDA and Director, Supplies and Disposals, Panchkula, Haryana vide memo No. 100/HR/RC/E-5/2024-25/4565-4585 dated 30.05.2025, to the entire satisfaction of the Engineer-in-Charge.” Note:- The procurement shall be made from approved agencies as per DGSandD memo No. 100/HR/RC/E-5/2024-25/4565-4585 dated 30.05.2025 |
| 12 | Providing, laying and installation of 100 mm dia G.I. pipe Class B as per IS 1239, delivery pipe suitable for submersible solar pumping set, including all fittings such as flanges, bends, nipples, nuts and bolts, jointing material, cutting, threading, lowering in tubewell , alignment, testing and commissioning, complete in all respects, as per specifications and to the entire satisfaction of the Engineer-in-Charge.” |
| 13 | Supply, erection and commissioning of 4500 LPM Horizontal centrifugal pump along with solid ss shaft and ss impeller material, motor of capacity 120 Hp /Suitable Hp,Phase,440/415 volt horizontal motor pumping set for canal water having head 75 mtr complete in all respects to achieve the required discharge (in cusecs) and power capacity (in HP) as per the satisfaction of the Engineer-in-charge. Make : CRI, Kirlosker, Crompton Greeve, BCH, Lubi) with 120 HP with proper foundation and third party inspection from CEIL/rites/Govt. agency. |
| 14 | Item Description HSR Item |
| 15 | H.S.R. Items Please Enable Macros to View BoQ information |
