|
| 1 | Dismantling Old Plaster or Skirting Racking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. DAR No-15.56, (Rs-43.17) |
| 2 | 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DAR-13.4.1, |
| 3 | Providing and Applying water proofing Treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consising of applying. (A) After surface preparation, frist layer of slurry of cement @ 0.488 kg/Sqm mixed with water propfing cement compound @ 0.253 kg/Sqm, (B) laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints og fibre cloth should not be less than 10 cm., (C) third layer of 1.5 mm thickness consisiting of slurry of cement @ 1.289kg/Sqm mixed with water proofing cement compound @ 0.670 kg/Sqm and coarse sand @ 1.289kg/Sqm this will be allowed to air cure for 4 hours followed by water curing for 48 hours. the entire treatment will be taken upto 30 cm on parapet wall and trucked info groove in parapet all around , (D) fourth and final layer of brick tiling with cement mortar (Which will be paid for separately. For the purpose of measurment the entire trated surface will be measured. DAR-22.6, (Rs-544.20) |
| 4 | Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DAR-11.40) |
| 5 | Providing and fixing Ist quality Ceramic Glazed Wall tiles Conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size-300x450 mm, (DAR-8.31), |
| 6 | Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS Standerd and weighing not less 810 gms. 15 mm nominal bore ( 18.50.1) |
| 7 | Providing and fixing white vitreous china water closet Squatting pan Indian type Orissa Pattern W.C. pan of Size 580x440 mm DSR-17.13.2, |
| 8 | Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) Conforming to IS : 7231 with all fittings and fixtures complete. 10 litre capacity white. (17.18.1). |
| 9 | Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal outer dia pipe, 18.8.2, |
| 10 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick sqm, DSR-26.87.1 (Rs-3433.68) |
| 11 | 40 mm thick Cement Concrete Flooring 1:2:4 (1 Cement: 2 Coarse Sand : 4 Graded Stone Aggregade) finished with a floating Coat of neat Cement lncluding Cement Slurry but excluding the coat of nosing of steps etc. Complete. 40 mm thick with 20 mm nominal size stone aggregate, DSR.N0-11.3.1, (Rs-485.18) |
| 12 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. DAR-1.1.18, Rs-390.31, Please Enable Macros to View BoQ information |