|
| 1 | Excavating in trenches, drains n. exc 1.5m wide and n. exc 1.5 m in depth for cleaning of drain etc. and getting out in soft/ loose soil all as specified and directed. |
| 2 | Removing excavated soil to a distance not exc 50m away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 3 | Demolition of brick masonry work built in cement mortar including all quions, arches, pillars etc of any description and in any position complete all as specified and directed. |
| 4 | M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 5 | All as per Srl item No. 04 above but except bricks. |
| 6 | M&L for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan to any radius in half brick thick wall as in sides of drain with bricks laid on edge, built in CM 1:4 complete all as specified and directed. |
| 7 | M&L for brick work with sub class 'B' old size brick laid on edge in top band of drain bedded and jointed in CM 1:4 and pointed in CM 1:3 complete all as specified and directed. |
| 8 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channel and drain including forming fair finished drain or channel in cement concrete without using extra cement including forms, moulds, mitred/stopper ends etc complete all as specified. |
| 9 | Taking down cement plaster, any description on brick or concrete surface or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc removing the rubbish off the premises complete all as specified and directed. |
| 10 | M&L for rendering 15mm thick in ready mix mortar on brick or concrete surfaces of walls, finished surface even and fair using WPC including taking down old cement plaster of any description, complete all as specified and directed.(Note : WPC shall be measured and paid for separately). |
| 11 | M&L for flush pointing to brick walls or bricks on edge with CM 1:3 including raking out existing joints/flush pointing with cleaning the surfaces complete all as specified and directed. |
| 12 | M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 13 | M&L for PCC(1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 14 | M&L for glossy finished coloured 60 mm thick PCC (M-35) factory made grey cement with no pigment, interlocking tiles/ paver block of shape/ size as conforming to IS 15658, joints will be filled with fine sand including dismantling existing tiles complete all as specified and as directed. |
| 15 | M&L for sand filling under floors including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for glossy finish coloured chequered cement concrete tiles with grey cement and pigment, 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 including demolition existing tiles and screed complete all as specified and directed |
| 17 | Demolition of cement concrete in ground floor & paving n.exc 15cm below/ above ground level and of any description and in any position not otherwise specifically provided for. |
| 18 | M&L for cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, bands etc including weathering, slightly rounded or chamfered throating as directed including form work (straight or curved) and finish all exposed surface of concrete complete all as specified and directed. |
| 19 | M&L for preparation of old plastered surfaces and applying one coat of synthetic enamel paint on kerb stone of any description over 10cm girth or width, not otherwise described complete all as specified and directed. |
| 20 | M&L for factory made kerb stone of M-25 grade cement concrete fixing in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage complete all as specified and directed by Engr-in-Charge. |
| 21 | Demolition of stone slabs, kerb stone and tiles of any description or thickness in floors, aprons etc. laid, or bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for preparation of new surfaces and applying two coats of synthetic enamel paint over a coat of primer on kerb stone of any description over 10cm girth or width, not otherwise described complete all as specified and directed. |
| 23 | Demolition reinforced cement concrete of any description and in any position not otherwise specically provided (reinfocement cut as required to facilitate demolition) and removing the demolished material to low lying areas complete all as specified and directed. |
| 24 | M&L for factory made precast cover slab of size not exc 0.50 sqm with angle iron frame made of 40x4mm all around of RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for manhole, cover slab on drain etc and similar work complete all as specified and directed. |
| 25 | M&L for precast saucer drain made of RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and similar work etc complete all as specified and directed. |
| 26 | Demolition and breaking up 450 mm drain pipes (SGSW/ AC/reinforced concrete) set in cement mortar and taking out from trenches all as specified and directed. |
| 27 | M&L for reinforced concrete drain pipes NP3, 450mm bore for laying pipes level or to fall in trenches, on concrete bed and all necessary extra joints, waste and cutting as jointed complete with collars as specified and directed. |
| 28 | Dismantling post or struts (RCC) any section including taking out embedded portion and making good disturbed ground embedded in natural ground, complete all as specified and directed |
| 29 | M&L for excavating in post holes ( or similar holes) in soft/ loose soil, each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface all as specified and directed. |
| 30 | S&F mild steel angle iron, flat iron work as in fencing post and struts including cutting tops to shape as directed drilling holes notching for wire conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 31 | M&L for plain cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 32 | Supply only 3.15 mm dia PVC coated galvanized steel wire chain link fencing 75 mm x 75 mm mesh fixed with string bolts complete all as specified and directed. |
| 33 | Fixing only 3.15 mm dia, PVC coated chain link fencing 75 mm x 75 mm mesh, fixed to RCC fencing post with bolts etc including fixing of binding wire / line wire etc complete all as specified and directed. (Note :- Supply of PVC coated galvanized steel wire chain link fecncing, mild steel round bars, mild steel flat, nuts, bolts & washers will be measured and paid for separately). |
| 34 | Supply only mild steel round bars 10 mm dia, Fe 290, grade E-165, cut to length, bend to shape required and hooking ends for fixing to chain link fencing complete all as specified and directed. |
| 35 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screw end to be fitted with washers and one hexagonal or square nut, diameter of bolts 16 mm, length of bolt exc 5cm not exc 10cm long, complete all as specified and as directed. |
| 36 | M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 37 | Dismantling fencing wire mesh any type including rods, bolts complete all as directed. |
| 38 | S&F in repair for galvanized, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing straining bolts, including securing and tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc. complete all as specified and directed. |
| 39 | Restraining and resecuring including making good staples etc. of old serviceable barbed wire in position all as specified and directed. |
| 40 | Dismantling of framed work of timber scantling 40 Sqcm and over in section, in any position complete all as specified and directed. |
| 41 | S&F of Rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails, fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc. complete all as specified and directed by Engr-In-Charge. |
| 42 | Dismantling of asbestos cement corrugated or semi corrugated sheets in roof covering of any gauge and thickness complete all as specified and directed. |
| 43 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 44 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 45 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 35,264/- from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
