|
| 1 | Providing and fixing wash basin with C.I. brackets, without pillar taps ,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require .17.7 |
| 2 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps .17.7.3 |
| 3 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goodthe walls wherever required : .17.1 |
| 4 | Kitchen sink without drain board .17.10.2.1 |
| 5 | 610x510 mm bowl depth 200 mm .17.10.2.1 |
| 6 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : .17.13 |
| 7 | 17.13.2 Orissa pattern W.C. pan of size 580x440 mm .17.13.2 |
| 8 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. .17.15 |
| 9 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A |
| 10 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : .17.2 |
| 11 | White solid plastic seat with lid. .17.20.1 |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28 |
| 13 | Flexible pipe .17.28.2 |
| 14 | 32 mm dia .17.28.2.1 |
| 15 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. .17.31 |
| 16 | Providing and fixing of gate valve valve complete in all respect .18.17 |
| 17 | 20mm dia .18.17.1A |
| 18 | Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21 |
| 19 | 45 cm length .18.21.2 |
| 20 | 15 mm nominal bore .18.21.2.1 |
| 21 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48 |
| 22 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : .18.49 |
| 23 | 15 mm nominal bore .18.49.1 |
| 24 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 .18.53 |
| 25 | 15mm nominal bore .18.53.1 |
| 26 | Providing and fixing PTMT bib cock of approved quality and colour. .18.54 |
| 27 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms .18.54.1 |
| 28 | 15 mm nominal bore, 122mm long, weighing not less than 99 gms .18.54.2 |
| 29 | Providing and fixing PTMT, push cock of approved quality and colour. DSR 18.57.1 .18.57 |
| 30 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms DSR 18.57.1 .18.57.1 |
| 31 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. .18.62 |
| 32 | 15 mm nominal bore, 105 mm long, weighing not lessthan 138 gms .18.62.1 |
| 33 | 20 mm nominal bore, 120 mm long, weighing not lessthan 198 gms .18.62.2 |
| 34 | 25 mm nominal bore, 120 mm long, weighing not lessthan 198 gms .18.62.3 |
| 35 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms .18.63 |
| 36 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards .NSR |
| 37 | 15 mm nominal bore . |
| 38 | Providing and fixing of C.P grating of approved make .NSR |
| 39 | Providing and fixing of SFRC G.T cover with frame 375x375x25 mm thick made out of M.S. angle iron size 25x25x5 mm thick with fixingwire mash 1\\"x1\\" of 10 gauge including cutting welding and fixing with Cement concrete 1: 1 1/2 : 3. complete .NSR |
| 40 | Providing and fixing of SFRC inspection chamber cover with frame 600x600x35 mm thick made out of M.S. angle iron size 35x35x5 mm and TMT bars 10 mm i/d both sides including cutting welding and fixing with Cement concrete 1: 1 1/2 : 3. Complete. .NSR |
| 41 | Providing and fixing of PVC handle for L/L cistren complete in all respect as per entire satisfaction of EIC and make as approved by Engineer in charge. .NSR |
| 42 | Providing and fixing of CP waste for wash basin/Urinal complete in all respect. .NSR |
| 43 | Providing and fixing of CP pillar tap with foam flow 15 m complete in all respect. .NSR |
| 44 | Providing and fixing of PVC tank cover for water storage tank cover duty ISI marked of approved make .NSR |
| 45 | 500 ltr cap. . |
| 46 | 2000 ltr cap. . |
| 47 | Providing and fixing of CP/SS Long Bend for OWC .NSR |
| 48 | Providing and fixing of C.P. Pressmatic Pillar Tap complete in all respect. .NSR |
| 49 | Providing & fixing of Chinaware Urinal Partition wall M.Cera Make complete Size 600 mm Long .NSR |
| 50 | Providing and fixing of precast RCC Road Gully (2'x1') cover & frame complete in all respect. .NSR |
| 51 | Providing & fixing of Cp brass spindle for bib taps weight approx 110 gms complete in all respect. .NSR |
| 52 | Normal duty Spindle . |
| 53 | Heavy duty Spindle . |
| 54 | Provinding & fixing of One piece (EWC) water closet pan/European type full complete make as per approved maket list NSR .NSR |
| 55 | Providing and fixing of C.P long body Tap make Jaquar 047 KN/ 5 complete in all respect .NSR |
| 56 | Providing & fixing Hand shower jaquar model HS-1937 or equivelent model of same range AOR Make- Cera, Hindware Complete in all respect .NSR |
| 57 | Provinding & fixing Mixture Wash Basin Jaquar model FLR 5167NB or equivalent model of same range AOR Make Cera/Hindware Complete in all respect .NSR |
| 58 | Providing and fixing Health Faucet (ABC Body) with 1 metre long easy flex tube in chrome finish and wall hook complete make Jaquar model ALD - 585 or equal vent in the same price range of AOR .NSR |
| 59 | Providing & Fixing of PVC pipe line 6kg/cm2 pressure and special of approved make including jointing with cement solvent etc. complete in all respect .NSR |
| 60 | 4\\" i/d . |
| 61 | 3\\" i/d . |
| 62 | 2\\" i/d . Please Enable Macros to View BoQ information |
