|
| 1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. All Kinds of soil. |
| 2 | Supplying and filling in plinth, under floor, foundations etc with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.1 |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil |
| 4 | First class brick work in foundation and plinth including cost of all materials as required complete:in cement mortar 1:4(1 cement:4 fine sand) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level:1:3:6(1 cement:3 fine sand:6 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or moreThermo-Mechanically Treated Bars of grade Fe 500-D or more |
| 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and re-inforcement-All work up to plinth level:1:11/2:3 (1 cement:11/2 fine sand: 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and fixing hard drawn steel wire fabric of size 75x25 mm mesh or other suitable size wire mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of \\"L\\" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as required and as per direction of the Engineer-in-charge. |
| 9 | Providing structural work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 10 | Providing corrugated GS Sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and GI Limpet washers or with GI limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer-in-Charge.0.63 mm thick with zinc coating not less than 275 gm/m2 Please Enable Macros to View BoQ information |
