|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 8 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 9 | Providing and fixing to existing door frames. |
| 10 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 12 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. |
| 13 | Using M.S. angels 40x40x6 mm for diagonal braces |
| 14 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 16 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 17 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. |
| 18 | Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 19 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : |
| 20 | 4.0 mm thick glass panes |
| 21 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 22 | 25 mm thick |
| 23 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 24 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 25 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 26 | Size of Tile 600x600 mm |
| 27 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. |
| 28 | 110 mm diameter |
| 29 | 12 mm cement plaster of mix : |
| 30 | 1:6 (1 cement: 6 coarse sand) |
| 31 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 32 | 1:6 (1 cement: 6 coarse sand) |
| 33 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : |
| 34 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 36 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 37 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately). |
| 38 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : |
| 39 | 15 mm wide and 15 mm deep groove |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 41 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 42 | Old work (one or more coats) |
| 43 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 44 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 45 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 46 | One or more coats on old work |
| 47 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 48 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm |
| 49 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 50 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 51 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 52 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 53 | W.C. pan with ISI marked white solid plastic seat and lid |
| 54 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 55 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 56 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 57 | 10 litre capacity - White |
| 58 | Providing and fixing soil, waste and vent pipes : |
| 59 | 100 mm dia Sand cast iron S&S pipe as per IS: 1729 |
| 60 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 61 | Internal work - Exposed on wall 15 mm dia nominal bore |
| 62 | 20 mm dia nominal bore |
| 63 | 25 mm dia nominal bore |
| 64 | 32 mm dia nominal bore |
| 65 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 66 | 15 mm dia nominal bore |
| 67 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank |
| 68 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 69 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge. |
| 70 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 71 | Multyplying by gst correction factor 0.973 on DSR items |
| 72 | Add cost index 3 % |
| 73 | Credit for Dismantled steel work (M.S.angle, G.I pipe,C.I pipe,etc.) |
| 74 | Supply and stacking of following building material opf approved brand and manufacture (bearing ISI Mark and full filling relevent standards of ISI specification) at site, sample of each and every material has to be got approved from the Engineer-in-charge in writing before bulk supply and incase of paint, OBD and similar material vouchers are also to be deposited along with material. Payment will be made only after supply of all the material in full and good condition at once.Stone Aggregate (Single size) : 12.5 mm nominal size |
| 75 | Ordinary Portland Cement 43 grade (JK, ACC, BIRLA, SHREE) |
| 76 | White Cement (J.K, Birla) |
| 77 | White lead (Safeda) (500 grm each) |
| 78 | Plaster of Paris |
| 79 | Coarse sand (zone III) |
| 80 | Mirror of superior make glass 60x45 cm |
| 81 | G.I. Pipe (Jindal or equivalent)15 mm dia metre |
| 82 | Polyethylene water storage tank with cover and suitable locking arragement (500,1000 & 2000 litre capacity) (Sintex, Lotus, Star, Sheetal) |
| 83 | Vitreous china Indian type w.c. pan size 580 mm |
| 84 | 600x120 mm glass shelf with anodised aluminium angle frame,C.P. brass brackets and guard rail of standard size |
| 85 | Sand zone V (Jamuna) |
| 86 | Aluminium hanging floor door stopper with twin rubber & stopper |
| 87 | Hydraulic door closer tubular type Aluminium section body |
| 88 | 15mm PTMT Bib Cock (Prayag or equivalent) |
| 89 | PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 90 | PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 91 | 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts |
| 92 | Attending various day to day complaints of SEWERMAN, rectifying the defects by deploying sewer man when required, as per detail below along with necessary T & P by cleaning of blocked rain water pipes, soil / waste pipes, gully traps, floor traps, house drain. SW drain of any dia, manholes, road gully chamber etc. including removal of malba as foreign matters, girt, kanker, rubbing etc. as per directed by engineer-in-charge complete and maintenance of all services and upkeep properly. However all stores internal fitting / fixtures etc. required shall be supplied by the department free of cost at site (duty of sewer man is taken as 8 hrs. equal to 1 day on job). |
| 93 | Providing services of BELDAR for necessary assistance for the timely safe and successful operating of the job of Plumber /Carpenter / mason as per work requirement of these tradesman (beldar / coolie). The duty hour of the unskilled shall be treated as 8 hours equal to one day job. |
| 94 | Attending various day to day complaints of MASON, rectifying the defects by deploying mason when required, as per details below along with necessary T & P for repair of plaster, flooring, ceiling or any other cement repairs works as directed by engineer-in-charge complete and maintenance of all service and upkeep properly. However all store internal fitting/fixtures etc. required shall be given supplied by the department free of cost at site (duty of mason is taken as 8 hrs. equal to one day job). |
| 95 | Attending various day to day complaints of PLUMBER, rectifying the defects by deploying plumber along with necessary T & P by cleaning / repairing the W.C. Sheet, trap & repair of plaster, flooring ceiling or any other cement repairs of work as directed by engineer-in-charge complete and maintenance of all services and upkeep properly. However all stores internal fitting / fixtures etc. required shall be supplied by the department free of cost at site (duty of plumber is taken as 8 hrs. equal to 1 day on job). Please Enable Macros to View BoQ information |
