|
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for cess well cess pits man holes pier holes etc n.exc 10 sqm on plan n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed. |
| 3 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 4 | Removing excavated material (soil) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 5 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviciable material from site complete all as specified and directed. |
| 6 | Material and labour for brick work with flyash bricks, modular size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 7 | All as per item No 6.00 but except brick and ditto-.Note: - Serviciable bricks obtained from item No 5.00 shall be reused under this item including cleaning/ removing of cement mortar as directed by Engineer-in-Charge. |
| 8 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed. |
| 9 | Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers, first layer of 10mm thick and top layer of 5mm thick with using water proofing coumpound (WPC) @ 200ml per 50 Kg bag of cement or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 10 | Supply only liquid water proofing compound (WPC) complete all as specified and directed. |
| 11 | Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed. |
| 12 | Material and labour for complete removal of existing treatment on walls and applying two coats of cement base paint over a coat of alkali resistance primer including preparation of surface complete all as specified and directed. |
| 13 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 14 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed. |
| 15 | Material and labour for complete removal of existing treatement on old decorated surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparation of surface complete all as specified and directed. |
| 16 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 17 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 18 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 19 | Material and labour for rolled mild structural steel work in rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. conforming to Fe-410-W (Gde-E-250 quality-A) including one shop coat of zinc chromate primer complete all as specified and directed. |
| 20 | Supply and fix structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165 quality-A including one shop coat of zinc chromate primer complete all as specified and directed. |
| 21 | Material and labour for structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes including one shop coat of zinc chromate primer complete all as specified and directed. |
| 22 | Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 23 | Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 24 | Supply and fix pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 25 | Refixing, securing, erecting only with self tapping screws including minor mason work and filling of holes etc with concrete and making good of existing 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain/corrugated steel sheet as in roof covering/cladding to wall or in any position complete all as specified and directed.Note:- Serviceable sheet obtained from item No 22.00 shall be reused under this item. |
| 26 | Dismantling of posts or struts (wood, steel or RCC of any section) embedded in concrete, brick work masonry etc. any section, including taking out embedded portion and making good disturbed ground including removing of debris from site complete all as specified and directed. |
| 27 | Dismantling of fencing wire mesh of chain link or any type including removing of debris from site complete all as specified and directed. |
| 28 | Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 29 | Supply and fix mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including one shop coat of zinc chromate primer complete all as specified and directed. |
| 30 | Material and labour for mild steel round bars 10 mm dia as in tie bar of chain link fencing conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 31 | Supply and fix mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed. |
| 32 | Supply only chain link MS galvanisd fencing of any size complete all as specified and directed. Note:- Weight of chain link fence shall be ascertained through BOO as ordered by GE. |
| 33 | Fixing only chain link fencing including line wire, any mesh, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wires complete all as specified and directed. |
| 34 | Restraining, resecuring including making good to existing chain link fencing including line wire, any mesh, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wires complete all as specified and directed. |
| 35 | Supply and fix in repair concertina coil (CONSEC ZAL Super Razor punched barb tape (SRPBT)) aluminum base helix coil with and including necessary G.I fixing clips for securing complete all as specified and directed with following specification:- (i) Dia of coil (unstretched) - 610 mm (ii) No of Spirals - 6 spirals per per RM (iii) Weight of each coil with hessian pack - 8.00 Kg(±0.5). (iv) Central core wire :- Made from 2.60 mm dia G.I – High Tensile Wire as per IS-4454 galvanised as per IS-2629 . (v) Razor Punched Strip:- Razor punched tape is CONSEC-ZAL steel comprising of Aluminium base with zinc alloy @ 150 gm/ m2 conforming to ASTM A-792/A-792M with additional primer treatment of Epoxy/ Polyurethane & Final Paint Top coat of Caulifield green shade (BSL 139) by Hot Dipping process.Note:- Running length of the wall shall be measured for payment purpose. |
| 36 | Supply and fix in repair galvanised 2 strand, steel barbed wire 2.24mm dia. barbed with 2mm dia. barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.Note:- Each line wire shall be measured for payment. |
| 37 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and directed. |
| 38 | Material and labour for hardcore of broken stone or boulder of gauge exc 63mm but n.exc 100mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 39 | Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement including forming costruction joint 30mm deep x 10mm wide filled with sealing compound of group 'A' complete all as specified and directed. |
| 40 | Material and labour for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate ) as in flooring, sub base, pavings, surface channels, drains and manholes etc complete all as specified and directed. |
| 41 | Extra for forming fair finished drain or channel upto 80 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and directed.Note:- Only inner girth shall be measured for payment. |
| 42 | Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 43 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.including brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. |
| 44 | Material and labour for 75mm thick PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in floor including finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 45 | Material and labour for 20mm thick wearproof topping asspecified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finishedeven and smooth (except metallic hardner) mixing of cement and hardner in dry condition as per manufacturers instructions and mix with pea size gravel complete all as specified and directed. |
| 46 | Supply only metallic floor hardener complete all as specified and directed.Make- STP/ ASIAN PAINTS LTD/ FOSROC. |
| 47 | Material and labour for forming contraction (Dummy) joints 50mm deep x 10mm wide, filled with sealing compound of Grade- 'A' complete all as specified and directed. |
| 48 | Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 49 | Material and labour for rubber moulded chequered cement concrete tiles of size 300 x 300 x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement & no pigment as in path / floors etc and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 50 | Material and labour for providing and laying 60mm thick factory made rubber moulded chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 51 | Material and labour for re-laying cement concrete paver block of any size as in footpath, parks, lawns, drive ways or light traffic parking etc.including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Note- Serviceable paver block obtaintained from item No 48.00 shall be reused under this items. |
| 52 | Material and labour for joint free anti skid outdoor pavement coloured tiles (good grip series) of size 300 x 300 x 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 53 | Material and labour for providing, cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges of walls/columns etc including demolition of concrete of any desciption and in any postion complete all as specified and directed. |
| 54 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in base course/ levelling course for laying floor finishes complete all as specified and directed. |
| 55 | Material and labour for machine cut Kota stone slab flooring 20-25mm thick over 20mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including treating with beeswax polish complete all as specified and directed. |
| 56 | Material and labour for machine cut Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in cement mortar (1:4) including treating the surface with beeswax polish complete all as specified and directed. |
| 57 | Material and labour for grinding and polishing by machine to existing kota stone slab flooring including treating the surface with beeswax polish complete all as specified and directed. |
| 58 | Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. |
| 59 | Supply and fix in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed. |
| 60 | Supply and fix in repair 110 mm bore PVC (SWR) bends of any radius with access door complete all as speified and directed. Please Enable Macros to View BoQ information |
