|
| 1 | Material and Labour for replacement of Unsv components of Bed Ply top with Teak wood and appropriate size and shape to match the existing one all as per drg and as directed by Engr-in-charge. |
| 2 | (a) Head Rest complete with legs |
| 3 | (b) Foot Rest complete with legs |
| 4 | (c ) Long rails |
| 5 | (d) Short rail/Stiffener |
| 6 | (e) Replacement of ply wood OST 4mm thick both side of head rest with a teak wood beading |
| 7 | (f) All as per item No 1(e) above but foot rest |
| 8 | (g) Top made out of 12mm thick commercial plywood BWR grade ISI marked |
| 9 | All as per item No 01 above but Chair Dining |
| 10 | (a) Front legs |
| 11 | (b) Rear Legs |
| 12 | (c) Front/Back/Side rail |
| 13 | (d) Stiffener |
| 14 | (e) Back rest |
| 15 | All as per item No 01 above but Chair Easy |
| 16 | (a) Legs |
| 17 | (b) Front/Back/Side rail of seat & back |
| 18 | (c) Stiffener |
| 19 | (d) Handle |
| 20 | All as per item No 01 above but Chair Writing |
| 21 | (a) Front legs |
| 22 | (b) Rear Legs |
| 23 | (c) Front/Back/Side rail |
| 24 | (d) Stiffener |
| 25 | (e) Back rest |
| 26 | (f) Handle |
| 27 | All as per item No 01 above but Chair wooden bottom |
| 28 | (a) Front legs |
| 29 | (b) Rear Legs |
| 30 | (c) Front/Back/Side rail |
| 31 | (d) Stiffener |
| 32 | (e) Back rest |
| 33 | (f) Top made out of 6mm thick commercial plywood BWR grade ISI marked |
| 34 | All as per item No 01 above but Peg Table |
| 35 | (a) Legs |
| 36 | (b) Long rail |
| 37 | (c) Short rail/Stiffener |
| 38 | (d) Top of Peg Table made out of 18mm thick pre-laminated particle board exterior grade ISI marked and teak wood beading all around the top |
| 39 | All as per item No 01 above but Teapoy |
| 40 | (a) Legs |
| 41 | (b) Long rail |
| 42 | (c) Short rail/Stiffener small |
| 43 | (d) All as per item No 6(d) but top of Teapoy |
| 44 | All as per item No 01 above but Table Centre |
| 45 | (a) Legs |
| 46 | (b) Long rail |
| 47 | (c) Short rail/Stiffener small |
| 48 | (d) All as per item No 6(d) but top of Table centre/Teapoy Varandah |
| 49 | All as per item No 01 above but Table 3'x2' with/without drawer |
| 50 | (a) Legs |
| 51 | (b) Long rail/stiffner large |
| 52 | (c) Short rail/Stiffener small |
| 53 | (d) Drawer with Knob |
| 54 | (e) All as per item No 6(d) but top of Table Table 3'x2' with/without drawer wooden/steel |
| 55 | All as per item No 01 above but Table Dining 6/8 pers |
| 56 | (a) Legs |
| 57 | (b) Long rail |
| 58 | (c) Short rail/Stiffener |
| 59 | (d) All as per item No 6(d) but top of Table Dining 6 pers |
| 60 | (e) All as per item No 6(d) but top of Table Dining 8 pers |
| 61 | All as per item No 01 above but Table 900x900mm |
| 62 | (a) Legs |
| 63 | (b) Rail |
| 64 | (c) All as per item No 6(d) but top of Table 900x900mm |
| 65 | All as per item No 01 above but table writing |
| 66 | (a) Legs |
| 67 | (b) Long rail/Stiffener long |
| 68 | (c) Short rail/Stiffener small |
| 69 | (d ) Drawer with Knob |
| 70 | (e) Cabinet shutter with Knob made of 18mm thick pre-laminated particle board ISI marked |
| 71 | (f) Back ply of cabinet made of 6mm thick commercial ply wood ISI marked |
| 72 | (g) Side ply of cabinet made of OST ply 4mm thick/ Pre-laminated particle board 18 mm thick ISI marked |
| 73 | (h) All as per item No 6(d) but top of Table writing |
| 74 | All as per item No 01 above but Chair Easy with cushion |
| 75 | (a) Seat shall be fixed with 75mm thick 32 density synthetic foam covered with leatherised rexine over 6mm plywood on seat frame. |
| 76 | (b) Back shall be fixed with 50mm thick 32 density synthetic foam covered with leatherised rexine over 6mm plywood on back frame. |
| 77 | All as per item No 01 above but Side Board |
| 78 | (a) Legs |
| 79 | (b) Long rail |
| 80 | (c) Short rail |
| 81 | (d ) Drawer with Knob |
| 82 | (e) Shutter with Knob made of 18mm thick pre-laminated particle board ISI marked |
| 83 | (f) Back ply made of 6mm thick commercial ply wood ISI marked |
| 84 | (g) Side ply made of OST ply 4mm thick/ Pre-laminated particle board 18 mm thick ISI marked |
| 85 | (h) All as per item No 6(d) but top of Side board |
| 86 | All as per item No 01 above but Table Dressing Gents with Mirror |
| 87 | (a) Mirror 5mm thick |
| 88 | (b) Back ply of mirror made of 6mm thick commercial ply wood ISI marked |
| 89 | (c) Drawer complete with Knob |
| 90 | All as per item No 01 above but Table Dressing ladies with Mirror |
| 91 | (a) Mirror 5mm thick |
| 92 | (b) Back ply of mirror made of 6mm thick commercial ply wood ISI marked |
| 93 | (c) Back ply of Table made of 12mm thick commercial ply/ Pre-laminated particle board 18 mm thick ISI marked |
| 94 | (d) Side ply made of OST ply 4mm thick/ Pre-laminated particle board 18 mm thick ISI marked |
| 95 | (e) Drawer complete with Knob as per drg |
| 96 | (f) Sliding glass shutter with allum channel |
| 97 | (g) All as per item No 6(d) but top of Table dressing ladies |
| 98 | All as per item No 01 above but Hat stand with Mirror |
| 99 | (a) Mirror 5mm thick |
| 100 | (b) Back ply 3mm thick ply wood commercial with nail hook |
| 101 | (c) Front ply 3mm thick OST with TW beading all around |
| 102 | (d) Peg allum/brass to match the existing one |
| 103 | All as per item No 01 above but Bin Soil linen large |
| 104 | (a) Top Ply OST 6mm thick |
| 105 | (b) Front/Back ply OST 6mm thick |
| 106 | Material and Labour for canning of the following chairs with cane plastic half round white 2mm wide with a beading of 3mm wide cane all as per drg and as directed by Engr-in-charge |
| 107 | (a) Chair Dining |
| 108 | (b) Chair Writing |
| 109 | (c) Chair Easy |
| 110 | All as per item No 19 above but Chair Varandah with cane plastic half round white 4mm wide incl S&F of rubber shoe |
| 111 | Material and Labour for replacement of broken PVC seat/back of 4 mm thick and grooves 90x10mm, 10 No on each seat/back of Chair Varandah and as directed by Engr-in-charge |
| 112 | All as per item No 01 above but charpoy GI pipe with new made out of GI pipe 32mm medium grade ISI marked |
| 113 | (a) Long rail |
| 114 | (b) Short rail |
| 115 | (c ) Legs |
| 116 | (d ) GI Elbow 3 way 32mm |
| 117 | (e) Weaving with new nylon newar 50mm wide superior quality of white/light colour not made of recycled nylon and duly stitched with nylon thread on both ends weight of nylon newar shall not less than 1.70 kg/charpoy |
| 118 | (f) Material and Labour to provide 03 Nos Flat Iron Stiffener of size 40x5mm duly welded/fitted with nut and bolt in equal distance between 02 long rails. Stiffener should be painted with 02 coats of synthetic black enamel paint over a coat of red oxide primer and all as directed by Engr-in-charge. |
| 119 | (g) Supply and fixing of 12mm thick plywood commercial BWR type ISI Marked on charpoy GI pipe with 18 Nos nuts & bolts with GI washer of suitable size (04 Nos on each long rail and 02 Nos on each short rail/siiffener) after making holes with drilling machine and all as directed by Engr-in-charge.(Make of Plywood : Kitply/Everest/Century Ply/Green Ply/ Bhutan Board) |
| 120 | M & L for replacement of unsv components of Chair CB steel with arms |
| 121 | (a) Seat duly canned |
| 122 | (b) Back duly canned |
| 123 | (c) Handle |
| 124 | (d) Rubber shoe/cap |
| 125 | Material and Labour for replacement of seat made of 75 mm thick, 40 density foam with fabric on seat and fixed on 12mm ply of Chair Dining Offr as per drg and as directed by Engr-in-charge |
| 126 | Material and Labour for replacement of Unsv components of Chair writing all as directed by Engr-in-charge. |
| 127 | (a) Seat/back complete as per drg. |
| 128 | (b) Handle complete as per drg |
| 129 | Material and Labour for replacement of Unsv components of Almirah large and medium steel all as per drg and as directed by Engr-in-charge. |
| 130 | (a) Lock 4 lever |
| 131 | (b) CP handle with brass check nut. |
| 132 | (c) Cleat iron for support of shelves |
| 133 | (d) Complete locking device incl rod of Almirah large steel |
| 134 | (e) Complete locking device incl rod of Almirah Med steel |
| 135 | (f) Hinges steel |
| 136 | (g) Legs made of 1mm thick MS sheet |
| 137 | All as per item No 26 above but Locker bed side steel |
| 138 | (a) Hasp & Stapple 75mm |
| 139 | (b) Hinges Steel |
| 140 | (c) Chromium plated steel handle 100mm |
| 141 | (d) Legs made of 1mm thick MS sheet |
| 142 | All as per item No 26 above but Table office offr and Table office clk steel |
| 143 | (a) Lock existing pattern |
| 144 | (b) Complete cabinet with 3 drawers and lock made of 1mm thick MS sheet |
| 145 | (c) All as per item No 6(d) but top of Table office offr |
| 146 | (d) All as per item No 6(d) but top of Table office clk |
| 147 | (e) Rubber shoe |
| 148 | All as per item No 26 above but Table 900x900 steel |
| 149 | (a) Legs/Rails made of 25mm 1.6mm thick MS square tube |
| 150 | (b) S&F of 03 Nos Stiffener made of 25x750mm MS square tube 1.6mm thick |
| 151 | (c) All as per item No 6(d) but top of Table 900x900 steel |
| 152 | (d) Rubber shoe |
| 153 | All as per item No 6(d) but top of Table Dining |
| 154 | All as per item No 26 above but Chair Computer with arms |
| 155 | (a) Complete Seat as per drg |
| 156 | (b) Complete Back as per drg |
| 157 | (c) Handle as per drg |
| 158 | (d) Pedastal assy complete with coaster wheel as per drg |
| 159 | Material and Labour for replacement of tapestry cover of cushion of sofa set with best quality tapestry as approved by Engr-in-charge |
| 160 | (a) Sofa set 5 seater |
| 161 | (b) Sofa set 4 seater |
| 162 | S&F Cushion 21''x22''x4'',40 density duly covered with tapestry of approval quality in place of old cushion. Make of cushion is sleep well/ Kurlon. |
| 163 | Material and Labour for replacement of damaged ply top of Charpoy IP Hard top with 12mm thick commercial plywood BWR type ISI marked all as per drg and as directed by Engr-in-charge(Make of Plywood : Kitply/Everest/Century Ply/Green Ply/ Bhutan Board) |
| 164 | Material and Labour for replacement of damaged ply top of Bed Hard with 12mm thick commercial plywood BWR type ISI marked all as per drg and as directed by Engr-in-charge(Make of Plywood : Kitply/Everest/Century Ply/Green Ply/ Bhutan Board) |
| 165 | Material and Labour for welding the broken joints of steel furniture or steel portion of wooden furniture incl charpoy GI pipe by using gas welding as directed by Engr-in-charge |
| 166 | repair of multiseater (03 seater), steel Chair with back rest as approved by Engr-in-charge |
| 167 | Material and Labour for painting of steel furniture duly clean internal and external surfaces and make smooth by applying putty and applying two coats of synthetic enamel paint (approved colour) with spray gun and as directed by Engr-in-charge |
| 168 | (a) Almirah Medium steel |
| 169 | (b) Almirah large steel |
| 170 | (c) Chair CB steel with arms |
| 171 | (d) Chair CB steel without arms |
| 172 | (e) Chair Varandah |
| 173 | (f) Locker bedside steel |
| 174 | (g) Stool steel |
| 175 | (h) Side rack with tray |
| 176 | (j) Table 3x3 without drawer |
| 177 | (k) Table office clerk steel |
| 178 | (l) Table office officer steel |
| 179 | (m)Teapoy verandah |
| 180 | (n) Table Cook House |
| 181 | (o) Chair Steel multiseater |
| 182 | (p) Table Dining ORs |
| 183 | Material and Labour for polishing the following wooden furniture with two coats of french polish after preparation of surfaces smooth and as directed by Engr-in-charge |
| 184 | (a) Bed hard ply top |
| 185 | (b) Bin solid linen large |
| 186 | (c) Chair dining |
| 187 | (d) Chair Dining Offrs |
| 188 | (e) Chair easy |
| 189 | (f) Chair writing |
| 190 | (g) Chair wdn bottom |
| 191 | (h) Hat stand with mirror |
| 192 | (j) Peg table |
| 193 | (k) Side board |
| 194 | (l) Sofa set 4 seater |
| 195 | (m) Sofa set 5 seater |
| 196 | (n) Stool dressing |
| 197 | (o) Table 3x2 with/without drawer |
| 198 | (p) Table 3x3 |
| 199 | (q) Table centre |
| 200 | (r) Table dining 6 pers |
| 201 | (s) Table dining 8 pers |
| 202 | (r) Table dressing gents |
| 203 | (s) Table dressing ladies |
| 204 | (t) Table writing |
| 205 | (u) Teapoy Please Enable Macros to View BoQ information |
