|
| 1 | M & L for Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and directed. |
| 3 | Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed. |
| 5 | M&L for plain cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | M&L for brick work with Sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 7 | M&L for l TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 8 | All as per Sl item No 7 above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 9 | M&L for flat fair finished form work to sides and soffits of floor/plinth or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified and directed. |
| 10 | M&L for RCC 1:1.5:3 Nominal mix as in lintels etc, similar work complete all as specified and directed. |
| 11 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on internal wall surfaces and finished fair and even without using extra cement complete all as specified and directed. |
| 12 | M&L for rendering 15mm thick in two coats (10+5) on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) mixed with liquid water proofing compound 0.3% by weight of cement used upto 8 m height including necessary scaffolding complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately. |
| 13 | Supply only liquid water proofing compound complete all as specified and directed. |
| 14 | M&L for preparation of newly plastered surfaces of wall , applying 1mm thick wall care putty and applying two coats of emulsion distemper white or coloured by auto roller complete all as specified and directed. |
| 15 | Material & Labour for Complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming complete all as specified and directed. |
| 16 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 17 | M&L for PCC type B1 (1:2:4) using 20 mm graded aggregate as in copings, cills, surface channels etc like slightly rounded or chamfered and throating complete all as specified and directed. |
| 18 | M & L for Hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 19 | M&L for 75 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed. |
| 20 | M&L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in flooring/ hard standing complete all as specified and directed. |
| 21 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 22 | M&L for providing coloured non skid joint free ceramic tiles 7 to 8mm thick Square/rectangular, area of each tile exceeding 0.18 Sqm but ot exc 0.36 Sqm in floor of approved quality and pattern set, and jointed in neat cement slurry and pointed in coloured cement to match in floors including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 23 | All as per Sl item No 22 above, but in vertical surface as in dado's/skirting including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 24 | M&L for joint free Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 25 | M&L for glazed ceramic coloured tiles of size 300x450mmx7mm/350x250x7mm thick on vertical surfaces such as skirtings, dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 26 | M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) in plinth protection including finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 27 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 29 | S&F stainless steel Butt hinges 100mm size fixed to PVC frames complete all as specified and directed. |
| 30 | S&F Aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 31 | S&F Extruded aluminium handle fabricated type anodised 150mm long complete all as specified and directed. |
| 32 | S&F for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and directed. |
| 33 | M&L Powder coated Aluminium anodised frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 34 | M&L Powder coated Anodised aluminium window/ventilator shutters, side hung type or sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed. |
| 35 | M&L sheet glass ordinary quality and glazing 4.80mm thick with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 36 | M&L 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 37 | M&L aluminium anodized grill DG 916 of 10 mm dia rod square , rectangular, circular or similar type of shape, aperture not exc 7 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) Make Grill No 20 of DECOREL or equivalent as approved complete all as specified and directed. |
| 38 | M&L or laying 20 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including Cutting chases in brick work, pinning in making good to facing where required and pointing to cement mortar 1:3 to ends for concealed water tubing and making good for cutting n.exc 10 cm girth complete all as specified and directed. |
| 39 | M&L or laying 25 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 40 | M&L PVC (SWR) pipe single socketed, in any length with rubber ring joints 75 mm bore pipe, laid in trenches complete all as specified and directed. |
| 41 | All as per Sl item No 40 above, but 110mm dia of pipe complete all as specified and directed. |
| 42 | S&F fix PVC (SWR) bend 75 mm with access door complete all as specified and directed. |
| 43 | S&F fix PVC (SWR) bend 110 mm with access door complete all as specified and directed. |
| 44 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed. |
| 45 | S & F Stainless steel grating 125mm dia with/without hole complete all as specified and directed. |
| 46 | S&F 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) and fixed in position all as specified in SSR Pt- I complete all as specified and directed. |
| 47 | S&F ball brass valve, high pressure with polythene float and fly nut, screwed for iron pipe or brass ferrule of size 20 mm complete all as specified and directed. |
| 48 | M & L for 20mm dia Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 49 | S&F PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including flush pipe and PVC connections etc., complete all as specified and directed. |
| 50 | S&F Vitreous china wash down water closet pan pedestal pattern (EWC) including plastic water closet seat, closet pattern with flat bottom, and cover and aluminised hinge device complete all as specified and directed. |
| 51 | S&F vitreous china wash basin size 550 x 400 mm white flat back excluding tap waste chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 52 | S&F bib tap fancy type Chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of about 15mm bore diameter complete all as specified and directed. |
| 53 | S & F for 15mm dia CP Wall Mixer with Provision for Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed. |
| 54 | S&F Health faucet (ABS Body) steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 55 | S & F Angular cock with Flange, fancy type chromium plated with long shank and cup (concealed type) for 15 mm bore pipe complete all as specified and directed. |
| 56 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed. |
| 57 | S&F 15mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe complete all as specified and directed. |
| 58 | S & F 15mm dia Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed with 450mm Long Braided Hoses complete all as specified and directed. |
| 59 | S&F 15 mm bore chromium plated fancy type two way bib tap with flange, screwed down high pressure complete all as specified and directed. |
| 60 | Supply only waste fittings brass chromium plated 32 mm for sinks/basin etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 61 | M&L for 600 mm x 450 mm bevelled edge mirror or selected quality glass mounted on 6 mm thick AC building board on commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washer and fixed in repair complete all as specified and directed. |
| 62 | S&F PVC bath cabinet with built in shelf and looking mirror at shutters of size 14 x18 inches complete all as specified and directed. |
| 63 | M&L tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated in repair complete all as specified and directed. |
| 64 | S&F flexible PVC waste pipe of size 32mm dia used for wash basin & sinks complete all as specified and directed. |
| 65 | S & F 15mm dia 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 66 | S&F in repair 25mm dia fancy type brass brackets of selected color for decorative curtain rods complete all as specified and directed. |
| 67 | S&F PVC Corner glass shelf (with bracket) , fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 68 | M&L for MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and directed. |
| 69 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 70 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 71 | M & L for Rolled steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed. |
| 72 | M&L Powder coated Aluminium anodised frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 73 | M&L Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 1 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and directed. |
| 74 | M&L sheet glass ordinary quality and glazing 4.8mm thick in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 75 | M & L for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 76 | S&F for Aluminium (extruded section) body Hydraulic Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 77 | S & F for steel 4 lever Mortice lock, vertical type, size 75 mm complete all as specified and directed. |
| 78 | M&L for 5mm thick PVC hollow false ceiling board including 1200x600mm size aluminium concealed frame work with 4mm dia G.I wire hangers to fix the framework with RCC slab/Truss complete all as specified and directed. |
| 79 | M&L for excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25CM, in any type of soil complete all as specified and directed. |
| 80 | M&L cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete in pillars and posts complete all as specified and directed. |
| 81 | M&L Steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work etc complete all as specified and directed. |
| 82 | M&L Steel bolts, screwed one end, with hexagonal or square nuts and washers, the other end Exc 5 cm and n.exc 10cm long and Diameter of neck in 11 to 15 mm complete all as specified and directed. |
| 83 | M&L Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised steel wire, staples or steel pins etc complete all as specified and directed. |
| 84 | Fixing only chain link fencing including line wires, any mesh,size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 85 | Supply only Chain link MS galvanised fencing 4 mm dia , size 500 mm x 50 mm mesh complete all as specified and directed. |
| 86 | M&L for Steel deformed or round bars or 10 mm dia and above, cut to length bent to required shape incl cranking, bending and binding with Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 87 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 88 | M&L rolled steel in framed work as in doors or steel gates of angle or other section with gusset plates, etc., drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and directed. |
| 89 | M&L re-inforced punched concertina coil of 600mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised steel staple/clips for tying at crossing etc complete all as specified and directed. |
| 90 | Surface Excavation in any type of soil n exc 30 cm deep and averaging 15 cm deep and getting out any type of soil complete all as specified and directed. |
| 91 | Removing excavated material exc 250m but n exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 92 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooring etc complete all as specified and directed. |
| 93 | M&L for 75 mm thick cement concrete (1:2:4) type B-2 with using 40 mm graded stone aggregates) as in path, Making impression of expanded metal complete all as specified and directed. |
| 94 | M&L Forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. |
| 95 | M & L for Point wiring with 1.5 Sqmm PVC insulated and unsheathed single core multi stranded FRLSH grade copper conductor ISI marked 1100 volts grade drawn through PVC concealed conduit heavy grade ISI marked with all accessories cancelled in wall/Roof ceiling including PVC/MS modular boxes (Make-Presto/Press fit) of suitable size as required for mounting of modular switches socket etc including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable FRLSH grade for earth continuity and connecting to common earth dolly For one light point/ Ceiling/Exhaust Fan point/Bell point controlled by one switch complete all as specified and directed. |
| 96 | All as per Sl item No 95 above, but for one socket point 5 Amps on the independent board complete all as specified and directed. |
| 97 | All as per Sl item No 95 here-in-before, but for one socket point 5 Amps on same board complete all as specified and directed. |
| 98 | All as per item no 95 here in before but using 4sq mm single core copper conductor cable of multistrand FRLS grade PVC insulated Unsheathed 1100 volt grade for 16 Amps socket combination pt. including running of 4 Sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to common earth dolly for One 6 pin multi socket outlet, 16 Amps/ Metal Socket , independent complete all as specified and directed. |
| 99 | M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 100 | M&L in repair Rigid non-metallic PVC conduit of size 20 mm in dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed. |
| 101 | S& F modular type TV socket outlet 1 module complete all as specified and directed. |
| 102 | S & F Modular Bell Push Switch 1 way 6 A with indicator, 1 module complete all as specified and directed. |
| 103 | S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed. |
| 104 | S & F Modular Switch 1 way 16 A with indicator, 1 module complete all as specified and directed. |
| 105 | S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed. |
| 106 | S & F Modular Socket 6 A/ 16 A, 2/3/5 pin combined 2 module complete all as specified and directed. |
| 107 | S & F Modular Blank plate, 1 module complete all as specified and directed. |
| 108 | S & F Modular cover plate with frame 3 module complete all as specified and directed. |
| 109 | S & F Modular cover plate with frame 4 module complete all as specified and directed. |
| 110 | S & F Modular cover plate with frame 6 module complete all as specified and directed. |
| 111 | S & F Modular cover plate with frame 8 module complete all as specified and directed. |
| 112 | S&F of ceiling rose, surface Bakelite 65 x 30mm, three terminals, complete all as specified and directed. |
| 113 | S&F 36 W, 240 Volt, 50 HZ LED recessed mounted 2X2 tile, glare free uniform illumination having THD<20 %, 6500 k, with complete fitting(L bracket/ Spring Clamps option) complete all as specified and directed. |
| 114 | S&F 18 W, 240 Volt, 50 HZ LED recessed mounted, edge lit slim, down light with dia-cast aluminium housing having THD<20 %, Cool day light temp, efficiency 120 lm/W with complete fitting complete all as specified and directed. |
| 115 | S&F 10 W tube light fitting with lamp, LED Wall mounted LED batten with polycarbonate housing & integrated driver for efficient heat dissipation having THD<20% with complete all as specified and directed. |
| 116 | S&F of Exhaust Fan made of sturdy Engineering Plastic complete with louvers shutter, voltage 230 V, 50 HZ, RPM 1200 copper winding of sweep 250 mm including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and directed. |
| 117 | S&F AC single phase, 230 volts electric water heater, storage type steel body with copper inner tank and heating element Upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including connection with multistranded copper conductor flexible wire of suitable size from DB, necessary fixing arrangement i.e anchor nut, bolt, washer, PVC pipe connection and grouting and making good to disturbed surface complete all as specified and directed. |
| 118 | M&L sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed copper cable multistand 1100 V of FRLSH grade with drawn in and including Concealed PVC Conduit medium grade width not less than 25mm and one run of PVC insulated serviceable of 4 sqmm as earth continuity conductor drawn in Conceals PVC Conduit with accessories complete all as specified and directed. NOTE: 3 runs of 4 Sqmm and 1 run of PVC Conduit will be measured as one unit i.e RM |
| 119 | S&F factory made sheet metal enclosure with protected type 2 pin and earth plug and complete socket with one MCB SPN 240 volt, 20 Amps complete all as specified and directed. |
| 120 | S&F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified and directed. |
| 121 | S & F MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and directed. |
| 122 | S&F MCB 40 to 63 Amp, 240 Volt, DP, breaking capacity 10 KA 'C' series, complete all as specified and directed. |
| 123 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
