|
| 1 | Removal, dismantling and disposal of existing FRP cooling towers.(two nos) .Total weight approx. 1000 kgs. Cooling tower located on terrace of building. (60 feet above Ground level). Loading of scarps in trucks at Reprocessing facility trombay and unloading at disposal site within BARC premises (within 5Km lead) including labour, lifting mechanism and transportation truck. Removal of pipeline, FRP sheet, fills, GI structure, either by Gas cutting/spanner as per requirement of site conditions. Transportation truck in scope of contractor/bidder Erection of scaffolding and use of proper personal protective gears. |
| 2 | Supply of 12 Inch NB Carbon Steel Pipe, black in finish, conforming to ASTM A106 Gr.B seamless SCH 40, ASME B 36.19 as per tender technical specification. |
| 3 | Supply of 6 Inch NB Carbon Steel Pipe, black in finish, conforming to ASTM A106 Gr.B seamless SCH 40, ASME B 36.19 as per tender technical specification. |
| 4 | Supply of 4 Inch NB Carbon Steel Pipe, black in finish, conforming to ASTM A106 Gr.B seamless SCH 40, ASME B 36.19 as per tender technical specification. |
| 5 | Supply of 3 Inch NB Carbon Steel Pipe, black in finish, conforming to ASTM A106 Gr.B seamless SCH 40, ASME B 36.19 as per tender technical specification. |
| 6 | Supply of 0.75 Inch NB Carbon Steel Pipe, black in finish, conforming to ASTM A106 Gr.B seamless SCH 40, ASME B 36.19 as per tender technical specification. |
| 7 | Supply of 0.5 Inch NB Carbon Steel Pipe, black in finish, conforming to ASTM A106 Gr.B seamless SCH 40, ASME B 36.19 as per tender technical specification. |
| 8 | Supply of 12 Inch NPS, Elbow 90° (Long radius) Seamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 9 | Supply of 6 Inch NPS , Elbow 90° (Long radius)Seamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 10 | Supply of 4 Inch NPS , Elbow 90° (Long radius)Seamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 11 | Supply of 3 Inch NPS , Elbow 90° (Long radius)Seamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 12 | Supply of 0.5 Inch NPS, Elbow 90° (Long radius)Seamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 13 | Supply of 0.5 Inch NPS, both end threaded nipple (150mm long)Seamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 14 | Supply of 6 Inch X 3 Inch NPS Concentric ReducerSeamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 15 | Supply of 6 Inch X 4 Inch NPS Eccentric ReducerSeamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 16 | Supply of 4 Inch x 4 Inch x 4 Inch Equal TeeSeamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 17 | Supply of 2 Inch NPS both end threaded nipple Seamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 18 | Supply of 2 Inch NPS Blind cap Seamless Carbon Steel Pipe fiting conforming to ASTM A234 Gr WPB, SCH 40 pipe, ASME B 16.9 as per tender technical specification. |
| 19 | Supply of 12 Inch NPS blind flange conforming toANSI B16.5 , Class 150, ASTM A105 ,carbon steel Slip On /blind flange as per tender technical specification. |
| 20 | Supply of 6 Inch NPS Slip On raised face flange conforming toANSI B16.5 , Class 150, ASTM A105 ,carbon steel Slip On /blind flange as per tender technical specification. |
| 21 | Supply of 4 Inch NPS Slip On raised face flange conforming toANSI B16.5 , Class 150, ASTM A105 ,carbon steel Slip On /blind flange as per tender technical specification. |
| 22 | Supply of 6 Inch NPS ( Slip On raised face flange)Flanges conforming to ASTM A182 stainless steel 304L, Class 150, ANSI B16.5 as per tender technical specification. |
| 23 | Supply of 6 Inch NPS Butterfly valve Class 150 Integrally-moulded , control lever ( Hand Operated), WAFER type. End connection :- Wafer Flangeless ASME B16.5, class 150. As per tender technical specification |
| 24 | Supply of 4 Inch NPS Butterfly valve Class 150 Integrally-moulded , control lever ( Hand Operated), WAFER type. End connection :- Wafer Flangeless ASME B16.5, class 150. As per tender technical specification |
| 25 | Supply of Gun Metal/Bronze Gate Valve Class-2 (Screwed),Size:- 15MM, Valve of Class-2 (Screwed), screwed in bonnet, inside screw rising stem, End Connection:- Screwed Female thread to IS: 554.As per tender technical specification. |
| 26 | Supply of Gun Metal/Bronze Gate Valve Class-2 (Screwed),Size:- 50MM, Valve of Class-2 (Screwed), screwed in bonnet, inside screw rising stem, End Connection:- Screwed Female thread to IS: 554.As per tender technical specification. |
| 27 | Supply of Gun Metal/Bronze Gate Valve Class-2 (Screwed),Size:- 80MM, Valve of Class-2 (Screwed), screwed in bonnet, inside screw rising stem, End Connection:- Screwed Female thread to IS: 554.As per tender technical specification. |
| 28 | Supply along with pipe fitting, All Stainless Steel Pressure Gauge, Bourdon Type, Stainless steel case & Measuring system, Socket directly welded to case, Nominal size 100 mm (dial size), Range:- Dual Scale(PSI with Kg/cm2); 0 - 100 PSI and 0- 7Kg/cm2, Protection IP65/IP66. As per tender technical specification. |
| 29 | Supply of M20 X 150mm long , Alloy Steel NUT & bolts along with washers conforming to ASTM A193 Gr B7/Gr 2H as per tender technical specification |
| 30 | Supply of M18 X 150mm long, Alloy Steel NUT & bolts along with washers conforming to ASTM A193 Gr B7/Gr 2H as per tender technical specification |
| 31 | Supply of Mild steel structural material sections, like ISMC, ISA, MS plates in various sizes conforming to IS 2062 : 2011 and Square Hollow section (SHS) conforming to IS 4923, steel grade YST240., etc as per tender technical Specification. |
| 32 | Fabrication (excluding welding, item covered in Sr. 33 and 34) , laying, handling, cutting, bending, machining, cleaning, erection, laying, installation, assembly & testing, of all pipeline, pipe fittings, Valves & flanges., pressure gauge and fitting, Etc, of carbon Steel Pipe conforming to ASTM A106 Gr.B seamless SCH 40 pipe, ASME B 36.19 & Stainless Steel Seamless Pipe conforming to ASTM A-312 GR 304L seamless SCH 40 pipe, ASME B 36.10. Pipe sizes vary from 0.5 inch NB to 12 Inch NB. Complete as per tender technical specification. |
| 33 | SMA Welding of ASTM A106 Gr.B,SCH 40 Piping. It includes Edge preparation grinding / machining the edges of pipes, fit-up, making of correct hole in the header, SMAW butt/fillet welding of Pipe to pipe, pipe to flange (welding on both side of flange), pipe to various pipe fittings, all SMAWelding to be 100% D.P tested at root and final pass . Complete as per tender technical specification |
| 34 | GTAWelding of SS 304L piping.It includes Edge preparation grinding / machining the edges of pipes, fit-up, making of correct hole in the header, GTAW butt/fillet welding of Pipe to pipe, pipe to flange (welding on both side of flange),pipe to various pipe fittings, shielding & back purging with high purity(99.995% minimum)Argon gas. All GTAWelding to be 100% D.P tested at root & final pass. Complete as per tender technical specification. |
| 35 | Fabrication & installation of Mild steel structural material. Fabrication and installation of ladder &Tank cover , fabrication and erection of pipe /tube structure & support. Structural sections, like ISMC, ISA, MS plates in various sizes conforming to IS 2062 : 2011 and Square Hollow section (SHS).Also includes Painting of structures. Painting shall be as follows; First (01) coats :- Self-priming, high build, surface tolerant, cured with polyamidoamine two pack epoxy mastic paint of approved shades and of approved reputed make of minimum DFT of 100 microns. Second (02) Coat:- Two pack acrylic resin with urethane hardener and cured with aliphatic isocyanate paint of approved shades and of approved reputed make of minimum DFT of 50 microns. Third (03) Coat:- Two pack acrylic resin with urethane hardener and cured with aliphatic isocyanate paint of approved shades and of approved reputed make , of minimum DFT of 50 microns. All coat together to be of minimum DFT of 200 microns , as approved by EIC. The thickness of each coat of paint shall be measured and recorded by contractor with ELCOMETER in the presence of EIC Complete work as per tender technical specification. NOTE:- Partial work of approx. 3500kgs is to be carried out in radioactive area. All consumables in scope of contractor/bidder and erection of scaffolding at all height and use of proper personal protective gears shall be arranged by the contractor. |
| 36 | Painting of existing pipe line, pipe support, chemical storage tank, saddle platform at various elevations. Surface preparation of structures, pipe, chemical storage tank, saddle platform includes removal of mill scale together with all rust and surface contaminants such as grease, dirt and all pollutants. Painting shall be as follows; First (01) coats :- Self-priming, high build, surface tolerant, cured with polyamidoamine two pack epoxy mastic paint of approved shades and of approved reputed make of minimum DFT of 100 microns. Second (02) Coat:- Two pack acrylic resin with urethane hardener and cured with aliphatic isocyanate paint of approved shades and of approved reputed make of minimum DFT of 50 microns. Third (03) Coat:- Two pack acrylic resin with urethane hardener and cured with aliphatic isocyanate paint of approved shades and of approved reputed make , of minimum DFT of 50 microns. All coat together to be of minimum DFT of 200 microns , as approved by EIC. The thickness of each coat of paint shall be measured and recorded by contractor with ELCOMETER in the presence of EIC. Thickness of each coat of paint applied shall be stage passed /approved by EIC.Total minimum DFT should be 200 microns. No extra amount will be paid in case additional coats are to be done for achieving minimum DFT of 200 microns. The thickness of each coat of paint shall be measured and recorded by contractor with ELCOMETER in the presence of EIC. Thickness of each coat of paint applied shall be stage passed /approved by EIC. Contractor shall furnish manufacture's test certificate for every batch of paints brought at the site.Workmanship of painting shall generally confirm to the requirements of IS 1477 Part-II.Supply of paints for all coats shall be fully compatible and appropriate materials shall be obtained from reputed approved paint manufacturer. Including all consumables paint, thinner, brush, emery paper/cloth, cleaner, etc. painting machine, power cable shall be arranged by the contractor as per tender technical specification. Partial work of approx. 500 Sq. meter is to be carried out in radioactive area.All consumables in scope of contractor/bidderand erection of scaffolding at all height and use of proper personal protective gears shall be arranged by the contractor. Please Enable Macros to View BoQ information |
