Tender For Extension Of Nagar Palika Parishad Hathras Water Supply Scheme , District- Hathras., Hathras-Uttar Pradesh

TDR : 54767187

Tender Notice
BOQ

30 Days Left

Hathras , Uttar Pradesh

Tender Brief : Tender For Extension Of Nagar Palika Parishad Hathras Water Supply Scheme , District- Hathras.

Document Fees
₹ 23600 /-

EMD
₹ 6508000.0 /-

Tender Value
Refer document

Submission Date
20-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	OVER HEAD TANK
2	Submission of design, drawing and supply of all material, labour T&P etc. to construction of as per tenderer's own seismic proof design and drawings (approved by the department) complete intz type R.C.C. Over Head Tank with following capacity and staging on raft or pile or pile cum raft foundation with columns and braces of staging from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm. The design of the tank shall be based on safe bearing capacity of soil at site i.e. 8.0 T/m2 (datum) and depth of foundation as 2.50m (datum) from existing ground level on pile/raft foundation. Made up level of OHT will be taken as 0.60 m above existing gound level. Extra earth for filling of made up level will be arranged by the contractor at his own cost. The height of staging will be considered from the made up ground level to the ring beam (Top Face) of bottom dome. B.C. above given is tentative, contractor will have to test the B.C. and design of O.H.T. will be on actual B.C. found or 8.0 T/m2 which ever is less . All other details of tank not covered here shall also be as per specifications enclosed. The specifications for O.H.T. will be as follows :-
3	Submission of detailed design and drawing from any recognized University such as I.I.T. etc. or as per direction of Engineer in-charge.1. Minimum grade of concrete for whole structure-M30 2. Minimum grade of Steel for whole structure-Fe 550 TMT bars
4	R.C.C. O.H.T. as per approved design including fixing various pipes and ventilator at top and fixing of M.S. sheet of 8 mm gauge around manhole cover of 60cm x 60cm size with frame and locking arrangement and railing in three rows with 20mm OD medium quality GI pipe including supply of all material,labour,T&P etc.all complete.
5	Two column based R.C.C. vertical stair case with 1.0 m minimum clear width as an access to Balcony and Top Dome of tank from ground level as per design & drawing with 1.25 m high railling in three rows with 20mm OD medium quality GI pipe and gate with cabin made up of 60mmx60mmx6mm angle iron and 25mmx25mm square iron jali as per specification including supply of all materials.
6	Supply and fixing of S.S-316 ladder 60mmx60mmx6mm angle iron and 20mm dia bar from top of roof of top dome to inside the tank in a slope of 3:1 (3 vertical : 1 horizontal) with railing as specified and supply & fixing of SS bar cover for pipe opening inside the tank with all labour, T&P etc. complete.
7	Railing on staircase & its landings, all around balcony & top dome for access up to ventilator as specifications including supply of all material. Railing shall be provided in three rows of medium class G.I. pipe of 20mm dia and MS angle iron (60x60x6mm) should be provided in 1.25 m height with 1.2 m centre to centre on both sides of the stair case with embedded in concrete 1:1:2, MS gate should be provided as entrance of stair case with locking arrangement.
8	Supply and fixing of lightening conductor and earth plate etc. as per specifications.
9	Testing of tank for water tightness as per specifications enclosed including supply of water. If water for testing is made available by department, the cost of Rs. 100.00 per KL will be deducted from the contractor's bill.
10	Supply of all materials and construction of 80mm thick R.C.C. floor 1:1 1/2:3, R.C.C. apron and 20 cm dia semi circular drain around apron in a slope towards wash out chamber on 75 mm thick base concrete in 1:2:4 (cement:coarse sand: 40 mm stone ballast).
11	Three coats of approved quality and shade of Apex Painting as per direction of Engineer incharge over exposed surface of tank work including supply of all material, labour, T&P complete as required.
12	Three coats of anti corrosive / aluminum / black Japan paint of approved quality on all iron work including supply of all material, labour and T&P etc.
13	Suplly of all materials, labour, T&P and construction of brick masonry sluice valve chambers including fixing R.C.C. cover as per deptt. Type design for the all inlet, outlet and washout pipes. The R.C.C. cover shall be casted in M.S. Channel section with handles on both sides. (Sluice valve chamber for over flow & wash out may be combined)
14	The words U.P. Jal Nigam, year of construction of , capacity of O.H.T., Logo of AMRUT 2.0 and slogan approved by Engineer in charge shall be painted prominently in letter not less than 30 cm. in height.(1 Nos.)
15	Maintenance for 12 months inclucding supply of all materials etc. complete.
16	Other specifications which are required for construction of O.H.T., given by UP Jal Nigam Engineer In-charge time to time will be followed by contractor.
17	Zone 11100 KL/24.0 M Staging Supply, carting and fixing of following sizes D.I. D/F pipes (K-9) with required specials such as reducers, duck foot bend, bell mouth etc. from water container body as per norms upto the sluice valve chamber in the tank including supply of M.S. clamps, rubber insertion sheet, nut bolts, washer etc. complete as per specifications, (details given below). It also includes the provision of making byepass arrangement from CWR to all outlets of OHT including supply & fixing of all required materials & specials etc complete.Inlet Pipe 300 mm diaOutlet Pipe 400 mm dia Overflow Pipe 400 mm diaWashout Pipe 100 mm diaSupply and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.(details given below)Outlet Pipe 400 mm dia Washout Pipe 100 mm dia
18	Zone 2900 KL/24.0 M StagingSupply, carting and fixing of following sizes D.I. D/F pipes (K-9) with required specials such as reducers, duck foot bend, bell mouth etc. from water container body as per norms upto the sluice valve chamber in the tank including supply of M.S. clamps, rubber insertion sheet, nut bolts, washer etc. complete as per specifications, (details given below). It also includes the provision of making byepass arrangement from CWR to all outlets of OHT including supply & fixing of all required materials & specials etc complete.Inlet Pipe 150 mm diaOutlet Pipe 350 mm dia Overflow Pipe 300 mm diaWashout Pipe 100 mm diaSupply and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.(details given below)Outlet Pipe 350 mm dia Washout Pipe 100 mm dia
19	Zone 3800 KL / 22 m Staging Supply, carting and fixing of following sizes D.I. D/F pipes (K-9) with required specials such as reducers, duck foot bend, bell mouth etc. from water container body as per norms upto the sluice valve chamber in the tank including supply of M.S. clamps, rubber insertion sheet, nut bolts, washer etc. complete as per specifications, (details given below). It also includes the provision of making byepass arrangement from CWR to all outlets of OHT including supply & fixing of all required materials & specials etc complete.Inlet Pipe 150 mm diaOutlet Pipe 300 mm dia Overflow Pipe 300 mm diaWashout Pipe 100 mm diaSupply and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.(details given below)Outlet Pipe 300 mm dia Washout Pipe 100 mm dia
20	Zone 51100 KL / 22 m Staging Supply, carting and fixing of following sizes D.I. D/F pipes (K-9) with required specials such as reducers, duck foot bend, bell mouth etc. from water container body as per norms upto the sluice valve chamber in the tank including supply of M.S. clamps, rubber insertion sheet, nut bolts, washer etc. complete as per specifications, (details given below). It also includes the provision of making byepass arrangement from CWR to all outlets of OHT including supply & fixing of all required materials & specials etc complete.Inlet Pipe 300 mm diaOutlet Pipe 400 mm dia Overflow Pipe 400 mm diaWashout Pipe 100 mm diaSupply and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.(details given below)Outlet Pipe 400 mm dia Washout Pipe 100 mm dia
21	Zone 6600 KL / 22 m Staging Supply, carting and fixing of following sizes D.I. D/F pipes (K-9) with required specials such as reducers, duck foot bend, bell mouth etc. from water container body as per norms upto the sluice valve chamber in the tank including supply of M.S. clamps, rubber insertion sheet, nut bolts, washer etc. complete as per specifications, (details given below). It also includes the provision of making byepass arrangement from CWR to all outlets of OHT including supply & fixing of all required materials & specials etc complete.Inlet Pipe 150 mm diaOutlet Pipe 250 mm dia Overflow Pipe 200 mm diaWashout Pipe 100 mm diaSupply and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.(details given below)Outlet Pipe 250 mm dia Washout Pipe 100 mm dia
22	Zone 7500 KL / 22 m Staging Supply, carting and fixing of following sizes D.I. D/F pipes (K-9) with required specials such as reducers, duck foot bend, bell mouth etc. from water container body as per norms upto the sluice valve chamber in the tank including supply of M.S. clamps, rubber insertion sheet, nut bolts, washer etc. complete as per specifications, (details given below). It also includes the provision of making byepass arrangement from CWR to all outlets of OHT including supply & fixing of all required materials & specials etc complete.Inlet Pipe 150 mm diaOutlet Pipe 250 mm dia Overflow Pipe 200 mm diaWashout Pipe 100 mm diaSupply and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.(details given below)Outlet Pipe 250 mm dia Washout Pipe 100 mm dia
23	For every one meter increase or decrease of height of staging of O.H.T.
24	(i) for increase
25	(ii) for decrease
26	For every 0.5 meter increase or decrease in depth of foundation of O.H.T. from natural G.L. (specific/datum depth is 2.5 m from G.L.)
27	(i) for increase
28	(ii) for decrease
29	REPAIRING OF EXISTING OVER HEAD TANK
30	Providing and erection of scaffolding and shuttering material like challi, gurra, nail, bans, ballia, patra etc. required for complete of work on all surface area of OHT from top dome to G.L. so as to give strong and safe plateform to workers to work on all part of OHT for repair and strengthning as per direction of engineer in-charge.
31	Cleaning of exposed concrete surface of loose and foreign materials by means of sand blasting with coarse sand and including cleaning with all blast upto a height of 18 M above plinth level.
32	Provide semi circular drain of 200 mm dia all around the O.H.T. flooring consisting of cement concrete with 20mm gauge approved stone grit, coarse sand, cement in proportion of 1:2:4 including supply of all material, labour, T&P etc. required for proper completion of the work as per direction and satisfaction of Engineer Incharge.
33	Supply and fixing ventilator jali at O.H.T. including repairing of the ventilator and fixing the same properly including supply of all material, labour, T&P etc. required for proper completion of the work.
34	Supply and fixing of fabricated M.S. angle iron ladder consisting of 50x50x6mm angle iron and 20mm dia plain M.S. bar of 45 cm wide for a required length and painted with anti corrosive paint and fixing the same in the tank body including supply of all materials, labour, T&P etc. required for proper completion of the work as per direction of Engineer Incharge.
35	Supply and fixing of 20mm dia medium quality of G.I. pipe railing with M.S. angle iron post of section 50x50x6mm and 1.00 M height including grouting the angle iron post properly and fixing the pipe railing including supply of all material, labour, T&P etc. required for proper completion of the work as per direction of Engineer Incharge.
36	New Pipe Railing ¾\\" (20mm) dia medium quality.
37	Repair of Old Railing.
38	M.S. angle iron for single row post 50x50x6x1.25m height
39	Supply and fixing of following devices of the O.H.T. including cutting of hole for cleats to fix the same properly and including supply of all material, labour, T&P etc. and fixing the appliances in the cleats with screw or nails etc.
40	Water level indicator complete with marked scale.
41	Lightening Conductor.
42	Injection grouting in vertical surface/wall placing and fixing nozzle by drilling machine in tank wall having minimum dia of nozzle 15mm and provide on a regular interval not exceeding 1m including construction joints. Injection of pidicrete AM (Ploymer based on shrinkage high strength grout) admixed with cement through nozzle under pressure by sump @ 250gms per bag of cement sealing the nozzle after grouting with Ploymer product mixed with cement, making tank body in working and seapage free condition.
43	Painting the iron work in small area with one coat of anti corrosive primer coat and two coat of approved enamel paint including supply of all material, labour, T&P etc. required for proper completion of the work as per satisfaction of Engineer Incharge.
44	Railing of stair case and balcony with iron post and two rows of G.I. pipe 20mm dia.
45	Painting with approved quality Black Japan paint, inlet, outlet, washout pipe, over flow, pipe 100mm dia to 350mm dia.
46	Painting of outer surface of OHT with weather proof paint (like apex etc.) as per direction of engineer in-charge.
47	Zone-4
48	150KL/22M Staging
49	Supply of all material. Labour and T&P for repairing of OHT of 150 kl/22 m capacity including all items as per following.
50	CWR with ZONAL PUMPING STATION (ZPS)
51	Supply of all materials, labour and T&P etc. complete for the construction of Ground RCC CWR of following capacity & with 1.00m wide P.C.C. appron around with 20 cm semi circular C.C.(1:2:4) drain M.S. ladder with hand rails out side and inside the tank body proper ventilators at top, water level sensor, Lightening conductor as per latest I.S.I. or electricity rules, 1150mm dia medium pattern M.S. Manhole cover hinged with locking arrangement fixing and jointing vertical DI D/F, pipes, specials and duck foot bends of required size for inlet.
52	Supply and fixing of outlet sluice valve and wash out sluice valves with all jointing materials for proper completion and other appurtenant works including excavation in all type of soil & in rock etc. painting on exposed weather coat paint, painting of pipes and ladder with approved anticorrosive paints also including testing of the CWR including carriage of construction of materials by truck/ head load etc. upto site of work on 8 t/sqm tentative bearing capacity of soil (testing of BC of soil included) including fixing of overflow pipe
53	Supply and laying of pipe upto a suitable place and including construction of drainage system for emptying of CWR for cleaning & repairs and maintenance.construction of R.C.C. framed Pump house with Supply of all materials labour T&P etc. over CWR as per approved design, drawing and standard specifications with 1 m wide PCC appron around along with 15 cm semicircular CC (1:2:4) drains, RCC wall upto plinth level, to roof of pump house.
54	RCC floor, foundation and roof, 2m wide RCC plateform at plinth level, stair case from plateform to floor of pump house, railing on the stair case and CWR Walls and plateform foundation block of pumping plant RCC columns with bracket and longitudinal RCC beams to support moving gantry crane, plastering in the inner and outer brick masonry wall, flooring supply and fixing of doors, windows ventilators, painting on explosed surface with three coats of approved weather coat paint, acrylic emulsion in the inner surface, painting of door, windows ventilators, etc. supply and fixing of DI down pipes from roof to GL and other appurtenant works required to complete the pump house in all respect.
55	Zone 1 , 300 KL
56	Zone 5 , 300 KL
57	Testing of bearing capacity of soil from a reorganized Govt. Engineering College or as PER directed by department.
58	RISINGMAIN & DISTRIBUTION SYSTEM
59	Dismantling/Cutting of following types of road surface including sorting out of serviceable material and its stacking at a suitable place.
60	B.O.E. Road
61	Bituminous Road
62	C.C./R.C.C. Road
63	Interlocking Tiles Road
64	Excavation for pipe line trenches in ordinary soil,(lime, clay or sand including lift up to 1.5m and lead up To 50m and refilling, watering, ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches.
65	Excavation for pipe line trenches in Mixed soil,(Bajri,Kankar & Moorum including lift up to 1.5m and lead up To 50m and refilling, watering, ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches.
66	Supply of High Density Polyethelene Pipes (HDPE (PN-6) /PE-100)), conforming to IS 4984 / 14151 / 12786 / 13488 in coils / standard lengths F.O.R. desination rates per meter, inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation unloading & stacking the same etc. complete.
67	110 mm dia HDPE pipe 6 Kg/Sqcm.
68	140 mm dia HDPE pipe 6 Kg/Sqcm.
69	160 mm dia HDPE pipe 6 Kg/Sqcm.
70	Supply of ISI mark DI pipes (push on joints pressure pipes of D.I of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) including Third party inspection charges, Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store / site of work, unloading, stacking etc. completed as directed by Engineer –in-charge (IS 1536 / 2001 for pipes and IS 158 / 1969 and IS 12820 / 1989 or latest edition / revision with amendments for Rubber Gaskets.
71	D.I. Pipe (Class K-7)
72	200 mm dia D.I. K-7
73	250 mm dia D.I. K-7
74	300 mm dia D.I. K-7
75	350 mm dia D.I. K-7
76	400 mm dia D.I. K-7
77	D.I. Pipe (Class K-9)
78	150 mm dia D.I. K-9
79	300 mm dia D.I. K-9
80	Supply of the following sizes of D.I. D/F Sluice Valves conforming to latest/ relevant I.S. Specifications destination including F.O.R. destination and all taxes and insurance etc. with loading, unloading and carting up to site of work.
81	400 mm dia
82	350 mm dia
83	300 mm dia
84	250 mm dia
85	200 mm dia
86	150 mm dia
87	125 mm dia
88	100 mm dia
89	Supply of the following sizes of C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store / site of work, unloading, stacking etc.
90	100 mm dia
91	Supply of 50mm dia Single ball type air valve with gun metal seat at site store including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store / site of work, unloading, stacking etc.
92	Supply of Sluice valve type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot band and 63 mm dia standard make iron coupling with cap and chain etc. complete at site including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store / site of work, unloading, stacking etc.
93	Laying & Jointing of the following types and sizes of pipes including supply of all electrofusion fittings, D.I. Specials & jointing materials as per site requirement . All jointing work in HDPE Pipe must be carried out using electrofusion process ( Including availability of electrofusion jointing apparatus & supply of electricity using generator etc ) conforming to IS 4984/2016, IS 8329/2000 or their amendment including railway freight, insurance charges F.O.R. up to destination.
94	H.D.P.E. PIPE (6kg/cm2) PE-100
95	110 mm dia
96	140 mm dia
97	160 mm dia
98	D.I. Pipe (Class K-7)
99	200 mm dia D.I. K-7
100	250 mm dia D.I. K-7
101	300 mm dia D.I K-7
102	350 mm dia D.I. K-7
103	400 mm dia D.I. K-7
104	D.I. Pipe (Class K-9)
105	150 mm dia D.I. K-9
106	300 mm dia D.I K-9
107	Carting of D.I. D/F Sluice valves of Following sizes to the site of works Lowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete Excluding valves and specials Required but including the testing etc. complete.
108	400 mm dia
109	350 mm dia
110	300 mm dia
111	250 mm dia
112	200 mm dia
113	150 mm dia
114	125 mm dia
115	100 mm dia
116	Carting of D.I. D/F Scour valves to the site of works lowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete
117	100 mm dia
118	Carting of 50 mm dia Signle ball type air valves of following sizes to the site of works lowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete.
119	Carting of 80 mm dia flanges fire hydrant of the site of works lowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete.
120	Supply of all materials, labour T&P etc. required for construction of of sluice valve / scour valve chamber with proper working space, including excavation of earthwork, Ist class brickwork, plaster (1:4 cement, coarse sand mortar), heavy duty M25 grade RCC Cover ( 200 mm thick with double reinforcement), as per instructions of engineer-incharge.
121	Surface box type
122	Masonry type
123	Supply of all materials, labour T&P etc. required and construction of 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia MS manhole cover.
124	Supply of all materials, labour T&P etc. required and construction of 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia MS manhole cover.
125	Road Crossing By Trenchless Method (HDD) ‐ Excavation in foundation of trench of proper size in soil mixed with moorum, Shingle, Kankar, soft rock, hard rock, including refilling, dressing and ramming earth or sand or bajri, ballast, including providing, supply, carting, lowering, laying and jointing of casing pipe of M.S. with appropriate size, with rubber ring joint, sand filling in gap inside M.S. pipe, insertion of distribution pipe into the encasing pipe including supply of T&P, including concrete of 150 mm thick in with 40mm gauge brick ballast local sand and cement in proportion of 8:4:1, provision for barricading, labour for traffic diversion etc. Complete for proper completion of work as per instruction of Engineer.
126	200mm dia MS pipe upto 2 mtr depth
127	300mm dia MS pipe upto 2 mtr depth
128	400mm dia MS pipe upto 2 mtr depth
129	Provision for crossing (1.5m-3.0 m width) of nala & culverts including shiftijng of telephone cabel etc.along the alignment of pipe line including supply, laying & jointing of D.I. casing pipe of 150mm dia and special and also jointing material, their laying and jointing testing etc. complete
130	Provision for Large crossing (1.5m-3.0 m width) of nala & culverts including shiftijng of telephone cabel etc.along the alignment of pipe line including supply, laying & jointing of D.I. casing pipe of 200mm dia and special and also jointing material, their laying and jointing testing etc. complete
131	Construction of house connections
132	Making of ferrule connection in 50 to 400 mm nominal dia. distribution mains with electrofusion saddle piece having electro fused adapter, service connections, fittings and fixing of ferrule of 15mm size including tapping of the main and cost of bailling out of water. The above work includes supply, carting, laying & jointing/fitting of 20 mm G.I. Pipe , 20 mm H.D.P.E. Pipe (as per site required length) ,G.I. elbows for jointing of G.I. pipe, 1 No. HDPE saddle (for HDPE dia of existing pipe upto 200 mm) /MS clamp (for dia of existing pipe DI/CI above 200 mm), 1 No. 15 mm brass ferrule /F.C.V. SS - 316 conforming to relevant IS Specifications and 1 No. HDPE adopter, 1 Nos. FTPP Compressor Elbow, 1 No. PTMT Bib Cock along with all labour, T&P etc. required for proper completion of work Including excavation (Excluding dismantling / reinstatement of roads) and also submission of single set of GPS locationwise house connections photographs in soft & hard copy.
133	For New Pipe Line
134	Up to 110mm dia
135	For 125 mm to 140mm dia
136	For 160 mm to 180mm dia
137	For 200mm to 250mm dia
138	For 300mm to 350mm dia
139	Supply of all materials, labour, T & P etc. required and construct thrust blocks at the bends and below the Valves.
140	Permanent reinstatement of roads including all material, labour, T&P etc. complete work.
141	B.O.E. roads by 40% new bricks and 60% used old brick including all material labour, T&P etc. complete.as per direction of Engineer-In-Charge
142	Bitumen Road complete as per PWD specification for ODR and direction of Engineer In-charge.
143	C.C. Road with 150 mm thick CC work (1:2:4) cement, coarse sand & 20mm stone grit over 100 mm thick PCC base (1:4:8) cement, coarse sand & 40mm stone ballast after washing the trench and application of neat cement coat over the edges where ever necessary as per site requirement upto satisfaction of Engineer-In-Charge
144	Interlocking tiles roads by 40% new Interlocking tiles over 25 mm thick sand bedding including its base preparation with 75 mm thick PCC base (1:4:8) cement, coarse sand & 40mm stone ballast after washing the trench and application of neat cement coat over the edges and locks filled by fine sand and edge gapping filled by CC work (1:2:4) cement, coarse sand & 10mm stone grit where ever necessary as per site requirement upto satisfaction of Engineer-In-Charge.
145	BUILDING WORKS
146	Excavation in foundation & plinth in ordinary soil (sand, loam or clay) or kankar mixed soil with lift up to 1.50M and lead up to 50M including refilling watering ramming of excavated earth into the trenches, or into the space between the building and sides of foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50m from the center of foundation trenches.
147	Laying Plain Cement concrete with 40mm gauge stone ballast, coarse sand and cement in ratio of 12:6:1 in foundation including supply of all materials, labour, T&P etc. required for proper completion of work.
148	1st classbrick work in cement & coarse sand sand mortar in ratio 1:6 in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of work.
149	1st classbrick work in cement & coarse sand mortar in ratio 1:4 in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of work.
150	20 mm thick damp proof course with cement,approved coarse sand & Stone grit in 1:2:4 cement and coarse sand mortar including 5% water proofing material or as specified.
151	Sand filling in plinth including supply of necessary quantity of sand from the site of work including loading, unloading and cartage of earth, filling watering, ramming, dressing & leveling, labour, T&P etc. complete as per direction of Engineer Incharge.
152	1st Class brick work in 1:6 with cement & coarse sand sand mortar in super structure in one brick thick wall including supply of all materials, labour, T&P etc. required for proper completion of the work.
153	1st Class brick work in 1:4 with cement & coarse sand mortar in super structure in one brick thick wall including supply of all materials, labour, T&P etc. required for proper completion of the work.
154	Supply and fixing of all materials, labour, T&P etc. required for making door shutters by M.S. sheet 18 gauge, M.S. angle 50x50x6mm size also including angle iron chaukhat with hold fast as instructed by Engineer Incharge including cement, concrete for fixing the same in the walls complete.
155	R.C.C. work with cement, approved coarse sand and 20mm gauge stone grit in proportion of 1:1.5:3 in the following works excluding supply of reinforcement and its bending but including 0.50mm gauge wire and fixing in position also centering, shuttering, all materials, labour, T&P etc. required for proper completion of work.
156	Beams
157	Lintel, Sunshade & Slabs
158	Columns
159	Reinforcement work with Fe 550 TMT bars in R.C.C. work wrought to required shape as necessary including its bending and wastage including supply of all materials, labour, T&P etc. required for proper completion of work.
160	12mm thick plaster in cement & coarse sand mortar in ratio of 1:6 over brick work minimum thickness not to be less than 10mm including supply of all materials, labour, T&P etc. required for proper completion of work.
161	On smooth surface
162	On Rough Surface
163	12 mm thick plaster in Cement & Coarse sand mortar in ratio of 1:4 over brick work minimum thickness not to be less than 10mm including supply of all materials, labour, T&P etc. required for proper completion of work.
164	12 mm thick cement plaster to ceiling of mix 1:4 cement, coarse sand mortar including supply of all materials, labour, T&P etc. required for completion of work.
165	25 mm thick 1:2:4 plain cement concrete floor with cement, coarse sand and 20mm gauge approved stone grit, laid in panels, finished with 3mm thick floating coat of neat cement over 7.5cm thick base concrete consisting of cement and fine sand and first class brick ballast 40mm gauge in proportion of 1:6:12 and removing any over lapping mortar in the joints of the panels if any and giving an uniform finish including supply of all materials, labour, T&P etc. required for proper completion of the work.
166	construction of semi circular C.C. drain 200mm dia as per departmental drawing over 100 mm thick base concrete in 1:4:8 (Cement: Coarse Sand: 40 mm nominal size Coarse Aggregate) with finishing of 3 mm thick floating coat of neat cement including supply of all material, labour, T&P etc.
167	Supply of all materials, labour, T&P etc. and construction of 80 mm thick Interlockig tiles approach road over 25 mm thick sand bedding including its base preparation with 100 mm thick PCC base (1:4:8) cement, coarse sand & 40mm stone ballast and locks filled by fine sand and edge gapping filled by CC work (1:2:4) cement, coarse sand & 10mm stone grit where ever necessary as per site requirement upto satisfaction of Engineer-In-Charge.
168	Supply and laying complete 4 cm thick insulation layer of sand and clay over reinforecement concrete roof and 40 mm thick 1:2:4 plain cement concrete floor with cement, coarse sand and 20 mm gauge approved stone grit, laid in panels, finished with 3mm thick floating coat of neat cement over insulation layer including supply of all materials, labour, T&P etc.
169	Supply & fixing of rolled steel joist 250mm x 125mm and 10mm thick size including its black painting with approved paint and also one coat of primer with all materials, labour, T&P etc. required for proper completion of work.
170	Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.6 m wide gate and 1.2 m wide wicket gate.as per type design & drawing
171	Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.6 m wide gate.as per type design & drawing
172	Supply and fixing of rain water P.V.C. Pipe 110 mm 6 Kg/cm2 with bend and clamp etc. complete.
173	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.
174	Apex paint (approved quality) in two coats of approved shade over one primary coat including supply of all materials, labour, T&P etc. required for proper completion of the work.
175	Painting or varnishing of new iron work with one coat of primer and two coat of approved paint and varnish including supply of all materials, labour, T&P etc. complete in all respect in all floors.
176	Earth filling including supply of necessary quantity of soil from the site of work including loading, unloading and cartage of earth, filling watering, ramming, dressing & leveling, labour, T&P etc. complete as per direction of Engineer Incharge.
177	Construction of MCS ROOM as per type Approved design & drawing etc. and (all works will be done as per unit estimate of DPR ) including supply of all materials, labour, T&P etc. required for proper completion of the work. As per direction of engineer-In- incharge.
178	Construction of Rain Water Harvesting and Ground Water Recharge Unit. As per departmental type design. Including supply of all material, labour, T&P etc. complete in all respects. As per direction of E/I.
179	E&M WORKS:
180	New Tubewell
181	Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc.
182	Transportation, Erection and Dismantling of Rig Machine
183	Drilling of 500mm size bore from
184	(i) GL to 100MBGL
185	(ii) 100M BGL to 120MBGL
186	Zone testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect.
187	Tubewell AssemblyM.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. as required & as per typed design complete in all respect.
188	200 mm. Dia MS ERW slotted/ casing pipe having wall thickness of 7.1mm.
189	Supply of pea gravel
190	Logging of bore hole by departmental / approved electric logger.
191	Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect.
192	Lowering of 200mm dia pipe from GL to 100m deep BGL.
193	Lowering of 200mm dia pipe from 100 to 110m deep BGL.
194	Development of Tubewell by compressor
195	Transportation, Installation and Dismantling of Air Compressor
196	Development of Tubewell by 250 PSI or requisite Capacity of Air compressor
197	Development of Tubewell by O.P. Unit
198	Transportation, Installation and Dismantling of O.P. Unit & Yield Test.
199	Development of Tubewell by 2 Cusec or requisite Capacity of O.P. Unit
200	Chemical and Bacterological test of water sample from depaprtmental/ approved lab.
201	Provision of failed attempt of tubewell construction due to various reasons such as poor strata, less aquifer volume, quality problem area or any other reasons whatsoever encountered during work execution solely subjected to final decision taken by competent authorities.
202	PUMPING PLANT OVER NEW TUBEWELL WITHOUT CHLORINATING PLANT AT TUBEWELL
203	SITC of Submersible pumpset (700 LPM discharge 46/47 mtr.head coupled with suitable rating of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing, Painting , Toolset, Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc.(Both discharge & head are tentative may very as per actual site condition)
204	Servo volltage stabilizer (240-500 v) suitable rating for motor
205	Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well.
206	CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size.
207	Soft starter with RS-485 port-400V Class suitable rating for motor
208	3 Mtr. long heavy duty column pipe same as above item no.-1 taken as spare.( 01 No. set has 02 nos. column pipes)
209	Supply & Laying of Additonal XLPE insulated Copper flat cable size 1x3cx4 sq mm. or suitable size required for above motor for submersible pump set.
210	Supply & Laying of PVC insulated Al. armoured cable size 1x 3.5/4C x 16 sq mm. or suitable size required from transformer LV side to meter panel and meter panel to starter.
211	PUMPING PLANT OVER NEW TUBEWELL WITH CHLORINATING PLANT AT TUBEWELL
212	SITC of Submersible pumpset (700 LPM discharge 66/69 mtr. head coupled with suitable rating of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0 m. Long), Earthing, Painting , Toolset, Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. (Both discharge & head are tentative may very as per actual site condition)
213	Servo volltage stabilizer (240-500 v) suitable rating for motor
214	Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well.
215	CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size.
216	Soft starter with RS-485 port-400V Class suitable rating for Motor
217	3 Mtr. long heavy duty column pipe same as above item no.-1 taken as spare.( 01 No. set has 02 nos. column pipes)
218	Supply & Laying of Additonal XLPE insulated Copper flat cable size 1x3cx6 sq mm. or suitable size required for above motor for submersible pump set.
219	Supply & Laying of PVC insulated Al. armoured cable size 1x 3.5/4C x 16 sq mm. or suitable size required from transformer LV side to meter panel and meter panel to starter.
220	SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit.
221	S.I.T.C OF SCADA SYSTEM ON A TUBEWELL
222	CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations.
223	G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges.
224	CE & UL certified Inteligent Smart Energy Meter
225	Auto Phase reversal unit with inbuilt time delay and enclosure suitable rating of motor.
226	CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell.
227	CE & UL certified pressure transmitter
228	CE & UL certified Surge protector for above control panel
229	CE & UL certified 7\\" HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter.
230	Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT .
231	Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments)
232	Installation, commissioning & testing for one tubewell
233	Trial run for three month period for three nos for one tubewell
234	Trial Run & Maintenance of 03 Months including liquid chlorine & necessary staff required for operation. (excluding electricity charges)
235	S.I.T.C. OF PUMPING PLANTS & OTHER E/M ITEMS IN PROSPECTIVE TO NEW C.W.R., ZONE-1
236	PumpSet at C.W.R:
237	Supply of Electric Driven self water lubricated V.T. pump 1700 LPM 39 mtr. Head with suitable column pipe complete in all respect with discharge head assembly and strainer complete & coupled with suitable rating of motor VHS induction 50 hz 3 phase AC supply 415+6%-10% volts at speed 1470 RPMMOCSuction Case : CI FG 260 IS: 210 Line Shaft : Stainless Steel AISI 410Casing : CI FG 260 IS: 210Impeller : Stainless Steel CF8MImpeller Shaft : Stainless Steel AISI 410 Shaft Sleeves : Stainless Steel AISI 410 Bearing Retainer : CI FG 260 IS: 210 (a) Capacity 28.33 LPS/1700 LPM(b)Total head 39 Mtrs. Total nos. of 03 Pumpsets are proposed in module of operation in 2nos. are working , 1 Pump is standby . (Both discharge & head are tentative may very as per actual site condition)
238	Cast iron pipes & specials.
239	Supply of galvanized nut- Bolt SS-304 and rubber packing material for erection of above.
240	Reflex Valve
241	CIDF double flanged single/multi door swing check valves PN 1.0 FG200 Grade having body comprising inlet & outlet sheets in gradeed cast iron diaphragm fitted woth st. steel, faces,diaphragm plate and door , sub pins and shall be of following sizes:
242	150 mm dia or as per site condition
243	200 mm dia or as per site condition
244	CI Dismantling joints
245	150 mm dia or as per site condition
246	200 mm dia or as per site condition
247	E.O.T with Monorail Travelling trolley with chain pulley block.
248	E.O.T with Monorail Travelling Trolley with spur gear and 3.0 tonne capacity chain pulley block with 16 m lift.
249	Automatic type Chlorinating Plant
250	SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-20 LPH , pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 500 ltr capacity HDPE tank ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution 40 ltrs.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%).
251	L.T. Panel Board
252	L.T. Panel Board suitable for operation on 400 V, 3 Phase 50 Hz. A.C. supply in sheet steel enclosure in cubical pattern floor mounting with following fitted on the phase of the panel with bus incomer bar of 400 amps. Capacity, Bus Bar size of 50*10 mm. or suitable size and neutral of half the capacity and neutral of half the capacity sectionalized through a bus section. The panel shall comprise of the following.
253	02 No. incoming feeder from two Nos. Transformer with following details:-
254	02 nos. MCCB of 400 amps, or suitable rating 50 KA Micro processor type for Two seperate Transformers incomer preferably schneider/ABB with indication lamp mechanical on/off indicator.
255	One set of current transformer of ratio 400/5A
256	One No. CT operated ammeter 0-400A with ammeter
257	One No. Voltmeter 0-500 V with voltmeter
258	One No power factor meter 0.5 lag/ 1-0.5 lead
259	One No Surge arrestor Relay & One no. UV/OV Relay
260	One No frequency meter.
261	Total Nos. of Outgoing feeder as follows-
262	MCCB of 100 amps,50KA capacity with indication lamp mechanical on/off indicator. -03 nos.
263	Ammeter with selector switch.
264	Single phasing preventer.
265	Sets of timer and relays for overload and underload.
266	01 Nos. 63 Amps. MCCB for RTU/PLC Panel.
267	01 Nos. 63 Amps. MCCB as Misc. load
268	02 Nos. 32 Amps. 4P MCCB for lighting & spare one.
269	01 No. required KVAr APFC Panel with capacitor bank and feeder SFU & MCCB 63 Amp., 25 KA with APFC relay & other acceessories.
270	Power and control cables & Others
271	1100 V grade, 3.5 core 35mm2 or suitable rating of PVC insulated PVC sheathed Aluminium Armoured conductor cable from LT panel to starters.(1x3x50 mtr.)
272	1100V grade, 3C x16 mm2 or suitable rating of PVC insulated PVC sheathed submersible copper flat cable from junction box to motor 3 Nos pumps. (2x3x25 mtr.)
273	Control cable 1x10C, 1.5 mm2 PVC insulated PVC sheathed Copper conductor cable for moisture sensor Reverse protection thermistor relay etc.
274	Junction box in SS304, IP65 with instruments for pumps.
275	EARTHING
276	Complete earthing of all the equipments as detailed above shall be done as per IS/IER/PWD specification with G.I Plates, watering pipe and loop earthing with adequate size of G.I/ Al. strip etc. (PS-702) 02 Nos. each of the equipment (3 Nos Pumps + 1 No. LT Panel + 1 No. PLC Panel & other loads) size of earthing plate 600mm x 600mm x6 mm with salt and coal.
277	Lighting system:
278	Supply & erection of M.S. Tubular Poles SP-36, 9.5m. height.
279	Supply & Fixing of 72 watt LED with lumen reflector in a decorated fixtures as per required illumination level.
280	Feeder pillar for lighting with Distribution Board.
281	Supply and laying of 4Cx16mm2 or suitable rating Al. armoured cable.
282	Supply and laying of 6 mm2 or suitable rating Al. unarmoured cable flat PVC insulated used for connection of lights fitted to junction boxes.
283	Internal electrification of Panel rooms with fixtures and wires etc.complete in all respect.
284	Supply & Fixing of 1200 mm ceiling Fan for Panel Room
285	Supply & Fixing of exhaust Fan for Panel Room and other room.
286	Earthing of street light pole (SOR-41)
287	Painting of street light (P5-634)
288	Supply and installation of ABC type of 6 Kg. Fire existinguisher (Store pressure type) Dry powder agent.
289	12 mm thick rubber mating for safe working on at Panel room.
290	Tools
291	Hydrulic crimping tools- Crimping range: 300 sq.mm.
292	Mannual crimping tools- Crimping range: 400 sq.mm.
293	Tong tester (AC/DC-1000A), Multimeter (AC/DC-1000A), Megger (AC/DC-500V), Screwdriver (6\\"x 12\\"), Plier (250mm)
294	Chain wrench (12\\"x18\\"), Pipe wrench (1200mm)
295	Installation of all above E/M equipments etc. complete.
296	Testing of all above E/M equipments etc. complete at works & site as per direction given by Engineer-Incharge.
297	Commissioning of all above E/M equipments etc. complete
298	Chequered plate of required size so as to cover all trenches.
299	Power Distribution Transformer :
300	Supply of Oil immersed Outdoor type Power distribution transformer 11/0.433 KV rating 125 KVA or more suitable rating double wound with copper winding, Level-2 or 3, vector group dyn 11, ONAN with manually operated ± 5.0 % off load tap changer in step of 2.5% and complete with standard fitting & accessories.
301	Supply and laying of 1100 voltage grade ,1x3.5Cx 95 mm2 or more suitable rating Aluminium conductor, XLPE armoured cable from Transformers to LT Panel.
302	Double Earthing of Transformers consisting of 04 nos. Earthing Pit (two for each neutral and body) with Al/GI. strip size 25X6mm, the minimum distance between to earthing pits, Double Earthing works and all electrical equipments shall be as per IS and IER.
303	Installation , testing and Commissioning of Transformer complete.
304	H.T. Switch Gear Panel :
305	Supply of 12 KV, H.T. V.C.B. Panel with one incoming & two out going ,630 Amp. (25 KA) Rating have followings-
306	Incommer Feeder- 01 No.
307	3 O/C + 1 EF IDMT Characteristics Relays based Incommer control panel equiped with over current & earth fault relay with core balance C.T., master trip relay, instantaneous under voltage realy & Auxilliary realy etc. C.T.ratio 30-20/5A Dual core, Class-1 for measurement core & 5P10 for protection core & PT 11KV/110 VAC. KWH meter, power factor meter, frequency meter. Amp. meter 0-20 & volt meter 0 to12 KV. All relays required separately conventioal type 24 to 30 VDC, 110 VAC.
308	Outgoing Feeder- 02 Nos.
309	outgoing feeder control panel equiped with triple pole 3 O/C + 1 E/F relay with IDMT & intantaneous characterisstics, mater trip relay & Auxilliary relay for Buchhloz alarm / trip, OTI alram / trip & WTI alram/trip, etc. C.T.ratio 30-15/5A, Class-1 for measurement core & 5P10 for protection core.
310	DC Supply
311	SICT battery bank, exide make, consisting of 16 cells, 2 volt each for supply VDC 24 to 30 Volt with battery charger of approved make with suitable M.S. Stand / Trolley, equipment fittings with accessories etc.
312	Supply and laying of 1x3Cx70 mm 2 or more suitable rating, 11 KV HT Al. XLPE cable from metering panel to H.T. Panel and from H.T. Panel to both transformers.
313	S/F of XLPE cable End termination box of 120mm2 :
314	Indoor end termination box.
315	Earthing of H.T Panel as per IS & IER.
316	Installation of HT Panel.
317	Testing & Commissioning of HT Panel etc.
318	Erection of All sub staion equipments and fencing with iron mesh etc. complete in all respect.
319	Commissioning of All sub station equipments etc. complete in all respect.
320	S.I.T.C. OF PUMPING PLANTS & OTHER E/M ITEMS IN PROSPECTIVE TO NEW C.W.R., ZONE-5
321	PumpSet at C.W.R:
322	Supply of Electric Driven self water lubricated V.T. pump 1700 LPM 39 mtr. Head with suitable column pipe complete in all respect with discharge head assembly and strainer complete & coupled with suitable rating of motor VHS induction 50 hz 3 phase AC supply 415+6%-10% volts at speed 1470 RPMMOCSuction Case : CI FG 260 IS: 210 Line Shaft : Stainless Steel AISI 410Casing : CI FG 260 IS: 210Impeller : Stainless Steel CF8MImpeller Shaft : Stainless Steel AISI 410 Shaft Sleeves : Stainless Steel AISI 410 Bearing Retainer : CI FG 260 IS: 210 (a) Capacity 28.33 LPS/1700 LPM(b)Total head 39 Mtrs. Total nos. of 03 Pumpsets are proposed in module of operation in 2nos. are working , 1 Pump is standby . (Both discharge & head are tentative may very as per site conditioon)
323	Cast iron pipes & specials.
324	Supply of galvanized nut- Bolt SS-304 and rubber packing material for erection of above.
325	Reflex Valve
326	CIDF double flanged single/multi door swing check valves PN 1.0 FG200 Grade having body comprising inlet & outlet sheets in gradeed cast iron diaphragm fitted woth st. steel, faces,diaphragm plate and door , sub pins and shall be of following sizes:
327	150 mm dia or as per site condition
328	200 mm dia or as per site condition
329	CI Dismantling joints
330	150 mm dia or as per site condition
331	200 mm dia or as per site condition
332	EOT with Monorail Travelling trolley with chain pulley block.
333	EOT with Monorail Travelling Trolley with spur gear and 3.0 tonne capacity chain pulley block with 16 m lift.
334	Automatic type Chlorinating Plant
335	SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-20 LPH , pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 500 ltr capacity HDPE tank ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution 40 ltrs.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%).
336	L.T. Panel Board
337	L.T. Panel Board suitable for operation on 400 V, 3 Phase 50 Hz. A.C. supply in sheet steel enclosure in cubical pattern floor mounting with following fitted on the phase of the panel with bus incomer bar of 400 amps. or suitable rating Capacity, Bus Bar size of 50*10 mm. and neutral of half the capacity and neutral of half the capacity sectionalized through a bus section. The panel shall comprise of the following.
338	02 No. incoming feeder from two Nos. Transformer with following details:-
339	02 nos. MCCB of 400 amps,50 KA Micro processor type for Two seperate Transformers incomer preferably schneider/ABB with indication lamp mechanical on/off indicator.
340	One set of current transformer of ratio 400/5A
341	One No. CT operated ammeter 0-400A with ammeter
342	One No. Voltmeter 0-500 V with voltmeter
343	One No power factor meter 0.5 lag/ 1-0.5 lead
344	One No Surge arrestor Relay & One no. UV/OV Relay
345	One No frequency meter.
346	Total Nos. of Outgoing feeder as follows-
347	MCCB of 100 amps,50KA capacity with indication lamp mechanical on/off indicator. -03 nos.
348	Ammeter with selector switch.
349	Single phasing preventer.
350	Sets of timer and relays for overload and underload.
351	01 Nos. 63 Amps. MCCB for RTU/PLC Panel.
352	01 Nos. 63 Amps. MCCB as Misc. load
353	02 Nos. 32 Amps. 4P MCCB for lighting & spare one.
354	01 No. required KVAr APFC Panel with capacitor bank and feeder SFU & MCCB 63 Amp., 25 KA with APFC relay & other acceessories.
355	Power and control cables & Others
356	1100 V grade, 3.5 core 35mm2 or suitable rating of PVC insulated PVC sheathed Aluminium Armoured conductor cable from LT panel to starters.(1x3x50 mtr.)
357	1100V grade, 3C x16 mm2 or suitable rating of PVC insulated PVC sheathed submersible copper flat cable from junction box to motor 3 Nos pumps. (2x3x25 mtr.)
358	Control cable 1x10C, 1.5 mm2 PVC insulated PVC sheathed Copper conductor cable for moisture sensor Reverse protection thermistor relay etc.
359	Junction box in SS304, IP65 with instruments for pumps.
360	EARTHING
361	Complete earthing of all the equipments as detailed above shall be done as per IS/IER/PWD specification with G.I Plates, watering pipe and loop earthing with adequate size of G.I/ Al. strip etc. (PS-702) 02 Nos. each of the equipment (3 Nos Pumps + 1 No. LT Panel + 1 No. PLC Panel & other loads) size of earthing plate 600mm x 600mm x6 mm with salt and coal.
362	Lighting system:
363	Supply & erection of M.S. Tubular Poles SP-36, 9.5m. height.
364	Supply & Fixing of 72 watt LED with lumen reflector in a decorated fixtures as per required illumination level.
365	Feeder pillar for lighting with Distribution Board.
366	Supply and laying of 4Cx16mm2 or suitable rating Al. armoured cable.
367	Supply and laying of 6 mm2 or suitable rating Al. unarmoured cable flat PVC insulated used for connection of lights fitted to junction boxes.
368	Internal electrification of Panel rooms with fixtures and wires etc.complete in all respect.
369	Supply & Fixing of 1200 mm ceiling Fan for Panel Room
370	Supply & Fixing of exhaust Fan for Panel Room and other room.
371	Earthing of street light pole (SOR-41)
372	Painting of street light (P5-634)
373	Supply and installation of ABC type of 6 Kg. Fire existinguisher (Store pressure type) Dry powder agent.
374	12 mm thick rubber mating for safe working on at Panel room.
375	Tools
376	Hydrulic crimping tools- Crimping range: 300 sq.mm.
377	Mannual crimping tools- Crimping range: 400 sq.mm.
378	Tong tester (AC/DC-1000A), Multimeter (AC/DC-1000A), Megger (AC/DC-500V), Screwdriver (6\\"x 12\\"), Plier (250mm)
379	Chain wrench (12\\"x18\\"), Pipe wrench (1200mm)
380	Installation of all above E/M equipments etc. complete.
381	Testing of all above E/M equipments etc. complete at works & site as per direction given by Engineer-Incharge.
382	Commissioning of all above E/M equipments etc. complete
383	Chequered plate of required size so as to cover all trenches.
384	Power Distribution Transformer :
385	Supply of Oil immersed Outdoor type Power distribution transformer 11/0.433 KV rating 125 KVA or more suitable rating double wound with copper winding, Level-2 or 3, vector group dyn 11, ONAN with manually operated ± 5.0 % off load tap changer in step of 2.5% and complete with standard fitting & accessories.
386	Supply and laying of 1100 voltage grade ,1x3.5Cx 95 mm2 or suitable rating Aluminium conductor, XLPE armoured cable from Transformers to LT Panel.
387	Double Earthing of Transformers consisting of 04 nos. Earthing Pit (two for each neutral and body) with Al/GI. strip size 25X6mm, the minimum distance between to earthing pits, Double Earthing works and all electrical equipments shall be as per IS and IER.
388	Installation , testing and Commissioning of Transformer complete.
389	H.T. Switch Gear Panel :
390	Supply of 12 KV, H.T. V.C.B. Panel with one incoming & two out going ,630 Amp. (25 KA) Rating have followings-
391	Incommer Feeder- 01 No.
392	3 O/C + 1 EF IDMT Characteristics Relays based Incommer control panel equiped with over current & earth fault relay with core balance C.T., master trip relay, instantaneous under voltage realy & Auxilliary realy etc. C.T.ratio 30-20/5A Dual core, Class-1 for measurement core & 5P10 for protection core & PT 11KV/110 VAC. KWH meter, power factor meter, frequency meter. Amp. meter 0-20 & volt meter 0 to12 KV. All relays required separately conventioal type 24 to 30 VDC, 110 VAC.
393	Outgoing Feeder- 02 Nos.
394	outgoing feeder control panel equiped with triple pole 3 O/C + 1 E/F relay with IDMT & intantaneous characterisstics, mater trip relay & Auxilliary relay for Buchhloz alarm / trip, OTI alram / trip & WTI alram/trip, etc. C.T.ratio 30-15/5A, Class-1 for measurement core & 5P10 for protection core.
395	DC Supply
396	SICT battery bank, exide make, consisting of 16 cells, 2 volt each for supply VDC 24 to 30 Volt with battery charger of approved make with suitable M.S. Stand / Trolley, equipment fittings with accessories etc.
397	Supply and laying of 1x3Cx70 mm 2 or suitable rating,11 KV HT Al. XLPE cable from metering panel to H.T. Panel and from H.T. Panel to both transformers.
398	S/F of XLPE cable End termination box of 120mm2 :
399	Indoor end termination box.
400	Earthing of H.T Panel as per IS & IER.
401	Installation of HT Panel.
402	Testing & Commissioning of HT Panel etc.
403	Erection of All sub staion equipments and fencing with iron mesh etc. complete in all respect.
404	Commissioning of All sub station equipments etc. complete in all respect.
405	S.I.T.C OF SCADA SYSTEM FOR NEW C.W.R- ZONE-1 HAVING 03 NO. PUMPS
406	CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each ZPS/ OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations.
407	G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges.
408	CE & UL certified Inteligent Smart Energy Meter for each pump
409	Motor operated Actuators with Sluice valve of size 150 mm. or as per actual site condition at Delivery line of each pump.(2W+1S)
410	Motor operated Actuators with Sluice valve of size 200 mm. or as per actual site condition at common header.
411	CE & UL certified Electro magnatic flow Meter for line size 200 mm. or as per actual site condition.
412	Soft starter with RS-485 port-400V Class suitable rating for Motor
413	Auto Phase reversal unit with inbuilt time delay and enclosure suitable rating for motor
414	CE & UL certified Radar type water level transmitter for OHT as well as CWR.
415	CE & UL certified pressure transmitter for each pump
416	CE & UL certified Surge protector for control panel
417	CE & UL certified 7\\" HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter.
418	Complete cabling of CWR including all power and control cables of all equipment at CWR and OHT .
419	Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments)
420	Installation, commissioning & testing for CWR
421	Trial run for three month period for one CWR
422	S.I.T.C OF SCADA SYSTEM FOR NEW C.W.R- ZONE-8 HAVING 03 NO. PUMPS
423	CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each ZPS/ OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations.
424	G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges.
425	CE & UL certified Inteligent Smart Energy Meter for each pump
426	Motor operated Actuators with Sluice valve of size 150 mm. or as per actual site condition at Delivery line of each pump.(2W+1S)
427	Motor operated Actuators with Sluice valve of size 200 mm. or as per actual site condition at common header.
428	CE & UL certified Electro magnatic flow Meter for line size 200 mm. or as per actual site condition.
429	Soft starter with RS-485 port-400V Class suitable rating for Motor
430	Auto Phase reversal unit with inbuilt time delay and enclosure suitable rating for motor
431	CE & UL certified Radar type water level transmitter for OHT as well as CWR.
432	CE & UL certified pressure transmitter for each pump
433	CE & UL certified Surge protector for control panel
434	CE & UL certified 7\\" HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter.
435	Complete cabling of CWR including all power and control cables of all equipment at CWR and OHT .
436	Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments)
437	Installation, commissioning & testing for CWR
438	Trial run for three month period for one CWR
439	SCADA WORKS FOR NEW OVERHEAD TANK IN ZONE-1
440	Motor operated Actuators with Sluice valve of size 400 mm. or as per actual site condition at distribution line.
441	CE & UL certified Electomagnetic Flowmeter for OHT line size 400 mm. dia.or as per actual site condition
442	CE & UL certified Radar type level transmitter for OHT
443	Installation, commissioning & testing for of above items at one OHT
444	Trial run for three month period for three nos for one OHT
445	SCADA WORKS FOR NEW OVERHEAD TANK IN ZONE-2
446	Motor operated Actuators with Sluice valve of size 350 mm. or as per actual site condition at distribution line.
447	CE & UL certified Electomagnetic Flowmeter for OHT line size 350 mm. dia. or as per actual site condition
448	CE & UL certified Radar type level transmitter for OHT
449	Installation, commissioning & testing for of above items at one OHT
450	Trial run for three month period for three nos for one OHT
451	SCADA WORKS FOR NEW OVERHEAD TANK IN ZONE-3
452	Motor operated Actuators with Sluice valve of size 300 mm. or as per actual site condition at distribution line.
453	CE & UL certified Electomagnetic Flowmeter for OHT line size 300 mm. dia. or as per actual site condition
454	CE & UL certified Radar type level transmitter for OHT
455	Installation, commissioning & testing for of above items at one OHT
456	Trial run for three month period for three nos for one OHT
457	SCADA WORKS FOR EXISTING OVERHEAD TANK IN ZONE-4
458	Motor operated Actuators with Sluice valve of size 150 mm. or as per actual site condition at distribution line.
459	CE & UL certified Electomagnetic Flowmeter for OHT line size 150 mm. dia.or as per actual site condition
460	CE & UL certified Radar type level transmitter for OHT
461	Installation, commissioning & testing for of above items at one OHT
462	Trial run for three month period for three nos for one OHT
463	SCADA WORKS FOR NEW OVERHEAD TANK IN ZONE-5
464	Motor operated Actuators with Sluice valve of size 400 mm. or as per actual site condition at distribution line.
465	CE & UL certified Electomagnetic Flowmeter for OHT line size 400 mm. dia. or as per actual site condition
466	CE & UL certified Radar type level transmitter for OHT
467	Installation, commissioning & testing for of above items at one OHT
468	Trial run for three month period for three nos for one OHT
469	SCADA WORKS FOR NEW OVERHEAD TANK IN ZONE-6
470	Motor operated Actuators with Sluice valve of size 250 mm. or as per actual site condition at distribution line.
471	CE & UL certified Electomagnetic Flowmeter for OHT line size 250 mm. dia.or as per actual site condition
472	CE & UL certified Radar type level transmitter for OHT
473	Installation, commissioning & testing for of above items at one OHT
474	Trial run for three month period for three nos for one OHT
475	SCADA WORKS FOR NEW OVERHEAD TANK IN ZONE-7
476	Motor operated Actuators with Sluice valve of size 250 mm.or as per actual site condition at distribution line.
477	CE & UL certified Electomagnetic Flowmeter for OHT line size 250 mm. dia. or as per actual site condition
478	CE & UL certified Radar type level transmitter for OHT
479	Installation, commissioning & testing for of above items at one OHT
480	Trial run for three month period for three nos for one OHT
481	Trial Run & Maintenance of 03 Months including liquid chlorine & necessary staff required for operation. (excluding electricity charges)
482	MASTER CONTROL STATION (M.C.S.)
483	CE & BIS approved manufacturer's industrial grade LED monitor size 65\\" with latest configuration as per specification mentioned in tender documents.
484	Desktop/PC with i7 processor as per specification mentioned in tender documents.
485	CE/UL approved manufacturer's 5 KVA UPS with batteries as per specification mentioned in tender documents.
486	Full development version of required TAGS SCADA software suitable for digital and analog input/output features with customization of software as per requirement as per spec. mentioned with unlimited digital and analog Input/Output features specified in detailed technical document with customization of software as requirement
487	CE & UL approved manufacturer's control room PLC with Redundant CPU & power supply at MCS in IP54 enclosure as per specification mentioned in tender documents.
488	CE/UL certified field gateway agent for transfering data from MCS to Central control room(C.C.R.) Lucknow.
489	GSM based wireless / broadband/Equipment communication system for PLC capable to transfer and retreive data & gather data from remote sites to control stations, including all accessories complete. All accessories included signal enhancer antenna along with running expenses till DLP.
490	CE/UL approved manufacturer's Firewall for network protection
491	Surge protector for ethernet communication protection
492	CE/UL approved manufacturer's industrial grade ethernet switch
493	Mobile App facility system architecture complete.( industries internet based & viewed through mobile apps for increased local & remote visibility)
494	Canon/HP/equivalent latest Laser printer
495	Security Survelliance IP camera with DVR.
496	Installation, testing and commissioning with required furniture,Air Conditioner etc.
497	Test and trial run of whole system.
498	Trial Run & Maintenance of Three Months including staff (excluding electricity charges) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Water Storage and Supply Tenders

Water Supply Project Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Extension Of Nagar Palika Parishad Hathras Water Supply Scheme , District- Hathras., Hathras-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Extension Of Nagar Palika Parishad Hathras Water Supply Scheme , District- Hathras., Hathras-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us