|
| 1 | Providing and Carrying out the comprehensive cum routine & day to day maintenance of street lights by using Tower Wagon, ladders & all other relevant and suitable tools & plants for smoothly, healthy & proper illumination on roads by maintaining & repair of all types of network system where LED fittings installed in street lighting / High Mast Lighting / Semi-high mast lighting / underpass lights on the PWD Roads complete with supplying and replacement / repairing of all accessories like MCCB's, Contactors, Relays, Bus Bars, timers, panel wirings, pole wiring / cables, lugs, nuts and bolts etc and ensuring security thereof and to prevent theft of electricity from street light installations complete including inspection of road & submit the forth night inspection report to concerned JE(E)/AE(E) and preparation of data as required. (Inventory of points / roads attached) and as per terms and conditions attached). (Total Pts.:- 696 Points per Months |
| 2 | Supplying and Laying of XLPE insulated and PVC sheathed aluminium conductor armoured Power Cable of 1.1 KV grade of following sizes In HUME/ DWC Pipe/ Metal Pipe/ RCC Pipe etc. as required. |
| 3 | 4X25 Sq. mm. |
| 4 | 4X10 Sq. mm. |
| 5 | Supplying and drawing following size of PVC insulated Aluminium conductor multicore cable in the existing poles and bracket from cable termination connector to the fitting i/c providing suitable lugs connections etc. as reqd. |
| 6 | 3 core 2.5 sq.mm Al cable |
| 7 | Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). |
| 8 | 180 Watt |
| 9 | Fabrication, supplying & fixing of Designer single/double/tripple over hang PU Painted bracket made out of Suitable dia etc. complete as required. (Design as per approved sample). |
| 10 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :bituminous road |
| 11 | Surveying the site, taking exact size of existing Inspection chamber and then supplying & fixing of 75x25 mm GI wire mess of 350mmx350mm size with existing bars i/c Providing & laying design mix cement concrete of manufactured in automatic batch plant (RMC plant ) i/c transportation at site in transit Mixer etc complete as reqd. Please Enable Macros to View BoQ information |
