|
| 1 | HIGH MAST LIGHTING WORK |
| 2 | Supply and fixing of 12.5 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3mm. Top dia minimum 150 mm, bottom dia minimum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6mm dia, double drum winch. including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect.. As per PWD SOR-2024 SI No. 21.3 (Without GST Rate 246218x 0.8475 = 208669.75 Say Rs. 208670.00) [MAKE:-Bajaj/Philips /Valmont/ VSTP/ Kesclac Schreder/Ventura Salasar/Wipro] |
| 3 | Supply and ſixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend: glass UV stabilized PC Cover and lenses built with mandatory driver set suitaisle for 200 Watt. Confirming to IP 66, IK 07 and above protection compiete in all respect including Labour. 20400-24000 system Lumens, High power LED with lenses, >120 Lm/W, P.F.>0.95, THD <10% at full load, CRI >70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection a: 440V & >300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee. [Make:- Polycab/ Havells /Bajaj/ Philips/ Jaquar/ Crompton] |
| 4 | Supply and Laying of Aluminium Conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top as directed by Engineer in Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc [Make:-Havells/Polycab/Grandlay /KEI] |
| 5 | 16 Sqmm 4 core |
| 6 | 35 Sqmm 3.5core |
| 7 | S&F of 32 A. 415 V Metal clad TPN HRC type fuse unitcomplete in all respect. Cat.B [Make-Havells/ Schneider/ HPL/ ABB ] |
| 8 | Supply and Burring of Safe Earthing Electrode T-39 Zn-Zinc Coated, Length 3000 mm, outer pipe 76.30 mm x 3.2 mm inner pipe 42.40 mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonary housing [Make: As approved in U.P.P.W.D., & C.P.R.I. Certified] |
| 9 | S/F of following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect [Make-Havells/ Schneider/ HPL/ ABB ] |
| 10 | 15 A TPN d (ii) |
| 11 | S/F of following type of G.I. pipe \\"B\\" class for cable clamped with supports by 3 Nos. clamps made of 20x3mm M.S. flat and suitable size of nut bolt and washer required for proper completion of work as per direction of E/I. [MAKE :- TATA/SAIL/JINDAL] |
| 12 | 50 mm dia . |
| 13 | Supply and fixing of palm or pin copper tin plated cable socket (lugs) to the cable leads insulating with tape and making connections etc. complete in all respects |
| 14 | 16 Sqmm |
| 15 | 35 Sqmm |
| 16 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge. |
| 17 | 35 Sqmm |
| 18 | Supply and Laying of Control cable as per details analysis on page no. |
| 19 | 2.5 Sqmm 2 core |
| 20 | Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required [Make :- Reychem/ M-SEAL/Birla-3M] |
| 21 | 35 Sqmm 3.5 core |
| 22 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. Please Enable Macros to View BoQ information |
