|
| 1 | Carriage of all pettey material of estimate from JE Store/Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road. |
| 2 | STP Pole 11/13 mtr |
| 3 | PCC Pole 8.5/9 mtr |
| 4 | PCC Pole 11 mtr |
| 5 | ACSR Conductor (Dog, Weasel, Rabbit) |
| 6 | ABC Conductor (all sizes) |
| 7 | 11 KV XLPE Cable (3x35-3x70+3x120-3x185-3x300sqmm) |
| 8 | 33 KV XLPE Cable (3x185/240/300 Sqmm) |
| 9 | Re-straightening of Tilted Pole after digging of pit of suitable size adjustment of PCC/ST Poles and completion work properly, as per RESPO/Norms and as per direction of site incharge. |
| 10 | Cutting of tree branches along the route of the line and disposal of the same at suitable places and as per direction of site incharge. |
| 11 | Repair and replacement of damaged stay and concreting of stay with all accessories complete in all respect as per RESPO/Norms and as per direction of site incharge. |
| 12 | Guarding of 11KV Line & repair of damaged guarding with all accessories complete in all respect as per RESPO/Norms and as per direction of site incharge. |
| 13 | Repairing of broken/rusted pole at site by digging the base of round pole/joist approx. 3' depth straightening of pole in rest position by welding work including dismantling of L.T/H.T. line sagging and resagging after welding & refling the base of pole with sand, concrete and cement. Welding work by providing 1 mtr. long four pieces of M.S Angle 50x50x6 mm and 2 nos. M.S. Round ring in each pole of 12 mm thick for smooth working and Grouting of the same pole/supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge. |
| 14 | Erection, Fixing and Grouting of PCC Pole 8.5 mtr. long in LT. line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing L.T. Pin Clamps, M.S. Flat of size 50x6 & Schacle Insulator of size 75x90mm, with proper size nuts and bolts. |
| 15 | Erection, Fixing and Grouting of PCC Pole 8.5 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 16 | Erection, Fixing and Grouting of PCC/ST. Pole 11 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 17 | PCC Pole |
| 18 | S.T. Pole |
| 19 | Erection, Fixing and Grouting of following 11 mtr. long pole in 33 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 20 | PCC Pole |
| 21 | S.T. Pole |
| 22 | Grouting of following PCC/STP Pole supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials. |
| 23 | Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops. |
| 24 | Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts and lug |
| 25 | Dismantling & removal of existing ACSR Conductor and opening of all accessories and bundling the same at various places. |
| 26 | Stringging, Saggging of old loose ACSR Conductor and binding from insulator & proper completion of work as per RESPO/Drawing Norms. |
| 27 | (a) ABC Conductor (all sizes) |
| 28 | (b) ACSR Weasel Conductor |
| 29 | (c) ACSR Rabbit Conductor |
| 30 | (d) ACSR Dog Conductor |
| 31 | Replacement & fixing of damage X-Arm of 11 KV /33 KV Line. |
| 32 | Replacement & fixing of damage 11 KV Disc Insulator of 11 KV/33 KV Line. |
| 33 | Dismantling & Removal of old and used STP (Scrap)/PCC Pole, after digging of pit of suitable size and removal of all accessoires as per RESPO/Drawing Norms. |
| 34 | Laying Stringging & Final Saggging of ACSR Conductor and binding from insulator & proper completion of work as per RESPO/Drawing Norms. |
| 35 | (a) ABC Conductor (all sizes) |
| 36 | (b) ACSR Weasel Conductor |
| 37 | (c) ACSR Rabbit Conductor |
| 38 | (d) ACSR Dog Conductor |
| 39 | Carriage of old & damaged STP Scrap Pole, from site of work to JE Store/Electricity Store Centre Hapur including loading and unloading at both the ends on Kachha and Packka road. |
| 40 | Carriage of old & damaged scrap ABC/ACSR Conductor, from site of work to Electricity Store Centre Hapur including loading and unloading at both the ends on Kachha and Packka road. |
| 41 | Jumpering work properly of 11 KV & 33 KV line as per RESPO/Norms. Please Enable Macros to View BoQ information |
